Electrical and Electronic Engineering, Imperial College London
Doi
Abstract
Multiple-Input Multiple-Output (MIMO) systems, using antenna arrays at both
receiver and transmitter, have shown great potential to provide high bandwidth
utilization efficiency. Unlike other reported research on MIMO systems which
often assumes independent antennas, in this thesis an arrayed MIMO system
framework is proposed, which provides a richer description of the channel charac-
teristics and additional degrees of freedom in designing communication systems.
Firstly, the spatial correlated MIMO system is studied as an array-to-array
system with each array (Tx or Rx) having predefined constrained aperture. The
MIMO system is completely characterized by its transmit and receive array man-
ifolds and a new spatial correlation model other than Kronecker-based model is
proposed. As this model is based on array manifolds, it enables the study of the
effect of array geometry on the capacity of correlated MIMO channels.
Secondly, to generalize the proposed arrayed MIMO model to a frequency
selective fading scenario, the framework of uplink MIMO DS-CDMA (Direct-
Sequence Code Division Multiple Access) systems is developed. DOD estimation
is developed based on transmit beamrotation. A subspace-based joint DOA/TOA
estimation scheme as well as various spatial temporal reception algorithms is also
proposed.
Finally, the downlink MIMO-CDMA systems in multiple-access multipath fading channels are investigated. Linear precoder and decoder optimization problems
are studied under different criterions. Optimization approaches with different
power allocation schemes are investigated. Sub-optimization approaches with
close-form solution and thus less computation complexity are also proposed