Stress Injection Study on Hard Real-Time Operating Systems

The automotive software complexity has increased exponentially in the last 30 years. Nowadays, automotive applications are built on top of hard real-time operating system where many tasks are executed. Due to the automotive high integration levels and the time-to-market, software integration and robustness tests should be performed effectively and efficiently. Infineon Technologies for the AURIX 2G microcontroller has integrated a novel hardware architecture to support the Resource Usage Test and the Stress Test. Despite this hardware support, it has never been used before. Then, it is critical to propose a method to efficiently use this structure and to allow the evaluation of the performance and reliability of the chips. This thesis develops a method and a tool that uses stress injection to analyze the performance, robustness values and boundaries of hard real-time systems under different scenarios. The designer is able: i) to configure the embedded debugging hardware architecture to efficiently explore different stress scenarios; ii) to gather information; and to quantify different types of performance and robustness metrics. The method is automated and fully parameterizable. The developed tool in this thesis is called Galenus, it is integrated into the already existing internal debugging environment of Infineon Technologies for the AURIX microcontroller. The stress injection is based on the reduction of the effective performance of a SoC component (e.g., TriCore within AURIX). The stress injection allows to assess the sensitivity of the SoC under different stress scenarios. These scenarios are defined on the offline initial state using formal methods of scheduling theory. Using the stress injection method, the SoC designer can identify possible risk scenarios testing the performance and robustness of the system at runtime. This thesis is based on the stress injection by CPU suspension within two types of software application, RTOS and Bare-metal

Exact Speedup Factors and Sub-Optimality for Non-Preemptive Scheduling

Fixed priority scheduling is used in many real-time systems; however, both preemptive and non-preemptive variants (FP-P and FP-NP) are known to be sub-optimal when compared to an optimal uniprocessor scheduling algorithm such as preemptive earliest deadline first (EDF-P). In this paper, we investigate the sub-optimality of fixed priority non-preemptive scheduling. Specifically, we derive the exact processor speed-up factor required to guarantee the feasibility under FP-NP (i.e. schedulability assuming an optimal priority assignment) of any task set that is feasible under EDF-P. As a consequence of this work, we also derive a lower bound on the sub-optimality of non-preemptive EDF (EDF-NP). As this lower bound matches a recently published upper bound for the same quantity, it closes the exact sub-optimality for EDF-NP. It is known that neither preemptive, nor non-preemptive fixed priority scheduling dominates the other, in other words, there are task sets that are feasible on a processor of unit speed under FP-P that are not feasible under FP-NP and vice-versa. Hence comparing these two algorithms, there are non-trivial speedup factors in both directions. We derive the exact speed-up factor required to guarantee the FP-NP feasibility of any FP-P feasible task set. Further, we derive the exact speed-up factor required to guarantee FP-P feasibility of any constrained-deadline FP-NP feasible task set

Control techniques for thermal-aware energy-efficient real time multiprocessor scheduling

La utilización de microprocesadores multinúcleo no sólo es atractiva para la industria sino que en muchos ámbitos es la única opción. La planificación tiempo real sobre estas plataformas es mucho más compleja que sobre monoprocesadores y en general empeoran el problema de sobre-diseño, llevando a la utilización de muchos más procesadores /núcleos de los necesarios. Se han propuesto algoritmos basados en planificación fluida que optimizan la utilización de los procesadores, pero hasta el momento presentan en general inconvenientes que los alejan de su aplicación práctica, no siendo el menor el elevado número de cambios de contexto y migraciones.Esta tesis parte de la hipótesis de que es posible diseñar algoritmos basados en planificación fluida, que optimizan la utilización de los procesadores, cumpliendo restricciones temporales, térmicas y energéticas, con un bajo número de cambios de contexto y migraciones, y compatibles tanto con la generación fuera de línea de ejecutivos cíclicos atractivos para la industria, como de planificadores que integran técnicas de control en tiempo de ejecución que permiten la gestión eficiente tanto de tareas aperiódicas como de desviaciones paramétricas o pequeñas perturbaciones.A este respecto, esta tesis contribuye con varias soluciones. En primer lugar, mejora una metodología de modelo que representa todas las dimensiones del problema bajo un único formalismo (Redes de Petri Continuas Temporizadas). En segundo lugar, propone un método de generación de un ejecutivo cíclico, calculado en ciclos de procesador, para un conjunto de tareas tiempo real duro sobre multiprocesadores que optimiza la utilización de los núcleos de procesamiento respetando también restricciones térmicas y de energía, sobre la base de una planificación fluida. Considerar la sobrecarga derivada del número de cambios de contexto y migraciones en un ejecutivo cíclico plantea un dilema de causalidad: el número de cambios de contexto (y en consecuencia su sobrecarga) no se conoce hasta generar el ejecutivo cíclico, pero dicho número no se puede minimizar hasta que se ha calculado. La tesis propone una solución a este dilema mediante un método iterativo de convergencia demostrada que logra minimizar la sobrecarga mencionada.En definitiva, la tesis consigue explotar la idea de planificación fluida para maximizar la utilización (donde maximizar la utilización es un gran problema en la industria) generando un sencillo ejecutivo cíclico de mínima sobrecarga (ya que la sobrecarga implica un gran problema de los planificadores basados en planificación fluida).Finalmente, se propone un método para utilizar las referencias de la planificación fuera de línea establecida en el ejecutivo cíclico para su seguimiento por parte de un controlador de frecuencia en línea, de modo que se pueden afrontar pequeñas perturbaciones y variaciones paramétricas, integrando la gestión de tareas aperiódicas (tiempo real blando) mientras se asegura la integridad de la ejecución del conjunto de tiempo real duro.Estas aportaciones constituyen una novedad en el campo, refrendada por las publicaciones derivadas de este trabajo de tesis.<br /

Efficient Allocation And Enforcement Of Interfaces In Compositional Real-Time Systems

Compositional real-time research has become one of the emerging trends in embedded and real-time systems due to the increasing scale and complexity of such systems. In this design paradigm, a large system is decomposed into smaller and simpler components, each of which abstracts their temporal requirements via interfaces. Such systems are mostly implemented by resource partitions to ensure that the components receive resources according to their interfaces. Potential implementations of a resource partition are via server-based interfaces or demand-based interfaces. In this context, our thesis in this dissertation is as follows: Currently, server-based interfaces ensure strong temporal isolation among components at the cost of resource over-provisioning whereas demand-based interfaces precisely model the resource demand of a component without the guarantee of temporal isolation. For both these models, efficient and effective resource allocation as well as strict temporal isolation among components can be achieved. Specifically, we can obtain efficient and near-optimal bandwidth allocation schemes and admission controllers for periodic resource model and arbitrary demand-based interface respectively. Furthermore, efficient slack reclamation technique can be obtained to allocate unused processing resources at runtime while still enforcing the given interface. To support our thesis, we address efficient resource allocation among components with server-based interfaces by providing fully-polynomial-time approximation schemes (FPTAS) for allocating processing resource to components scheduled by earliest-deadline-first (EDF) or fixed-priority (FP) scheduling algorithm. For enforcing temporal isolation of demand-based interfaces, we provide a parametric approximate admission control algorithm, which has polynomial-time complexity in terms of number of active jobs in the system and the approximation parameter. Finally, to address efficient reclamation of unused processing resources, we give a novel technique to optimally and efficiently determine maximum allowable runtime slack for a component with arbitrary interface, considering active jobs in the system and guaranteeing system schedulability even for worst-case future job arrival scenarios. We expect that these techniques can ultimately be used to minimize the size, weight, and power requirements of real-time and embedded systems by reducing the processing resource requirements of such systems

An extensible framework for multicore response time analysis

In this paper, we introduce a multicore response time analysis (MRTA) framework, which decouples response time analysis from a reliance on context independent WCET values. Instead, the analysis formulates response times directly from the demands placed on different hardware resources. The MRTA framework is extensible to different multicore architectures, with a variety of arbitration policies for the common interconnects, and different types and arrangements of local memory. We instantiate the framework for single level local data and instruction memories (cache or scratchpads), for a variety of memory bus arbitration policies, including: Round-Robin, FIFO, Fixed-Priority, Processor-Priority, and TDMA, and account for DRAM refreshes. The MRTA framework provides a general approach to timing verification for multicore systems that is parametric in the hardware configuration and so can be used at the architectural design stage to compare the guaranteed levels of real-time performance that can be obtained with different hardware configurations. We use the framework in this way to evaluate the performance of multicore systems with a variety of different architectural components and policies. These results are then used to compose a predictable architecture, which is compared against a reference architecture designed for good average-case behaviour. This comparison shows that the predictable architecture has substantially better guaranteed real-time performance, with the precision of the analysis verified using cycle-accurate simulation

Generalizing List Scheduling for Stochastic Soft Real-time Parallel Applications

Advanced architecture processors provide features such as caches and branch prediction that result in improved, but variable, execution time of software. Hard real-time systems require tasks to complete within timing constraints. Consequently, hard real-time systems are typically designed conservatively through the use of tasks? worst-case execution times (WCET) in order to compute deterministic schedules that guarantee task?s execution within giving time constraints. This use of pessimistic execution time assumptions provides real-time guarantees at the cost of decreased performance and resource utilization. In soft real-time systems, however, meeting deadlines is not an absolute requirement (i.e., missing a few deadlines does not severely degrade system performance or cause catastrophic failure). In such systems, a guaranteed minimum probability of completing by the deadline is sufficient. Therefore, there is considerable latitude in such systems for improving resource utilization and performance as compared with hard real-time systems, through the use of more realistic execution time assumptions. Given probability distribution functions (PDFs) representing tasks? execution time requirements, and tasks? communication and precedence requirements, represented as a directed acyclic graph (DAG), this dissertation proposes and investigates algorithms for constructing non-preemptive stochastic schedules. New PDF manipulation operators developed in this dissertation are used to compute tasks? start and completion time PDFs during schedule construction. PDFs of the schedules? completion times are also computed and used to systematically trade the probability of meeting end-to-end deadlines for schedule length and jitter in task completion times. Because of the NP-hard nature of the non-preemptive DAG scheduling problem, the new stochastic scheduling algorithms extend traditional heuristic list scheduling and genetic list scheduling algorithms for DAGs by using PDFs instead of fixed time values for task execution requirements. The stochastic scheduling algorithms also account for delays caused by communication contention, typically ignored in prior DAG scheduling research. Extensive experimental results are used to demonstrate the efficacy of the new algorithms in constructing stochastic schedules. Results also show that through the use of the techniques developed in this dissertation, the probability of meeting deadlines can be usefully traded for performance and jitter in soft real-time systems