DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints

Grid Infrastructure for Domain Decomposition Methods in Computational ElectroMagnetics

The accurate and efficient solution of Maxwell's equation is the problem addressed by the scientific discipline called Computational ElectroMagnetics (CEM). Many macroscopic phenomena in a great number of fields are governed by this set of differential equations: electronic, geophysics, medical and biomedical technologies, virtual EM prototyping, besides the traditional antenna and propagation applications. Therefore, many efforts are focussed on the development of new and more efficient approach to solve Maxwell's equation. The interest in CEM applications is growing on. Several problems, hard to figure out few years ago, can now be easily addressed thanks to the reliability and flexibility of new technologies, together with the increased computational power. This technology evolution opens the possibility to address large and complex tasks. Many of these applications aim to simulate the electromagnetic behavior, for example in terms of input impedance and radiation pattern in antenna problems, or Radar Cross Section for scattering applications. Instead, problems, which solution requires high accuracy, need to implement full wave analysis techniques, e.g., virtual prototyping context, where the objective is to obtain reliable simulations in order to minimize measurement number, and as consequence their cost. Besides, other tasks require the analysis of complete structures (that include an high number of details) by directly simulating a CAD Model. This approach allows to relieve researcher of the burden of removing useless details, while maintaining the original complexity and taking into account all details. Unfortunately, this reduction implies: (a) high computational effort, due to the increased number of degrees of freedom, and (b) worsening of spectral properties of the linear system during complex analysis. The above considerations underline the needs to identify appropriate information technologies that ease solution achievement and fasten required elaborations. The authors analysis and expertise infer that Grid Computing techniques can be very useful to these purposes. Grids appear mainly in high performance computing environments. In this context, hundreds of off-the-shelf nodes are linked together and work in parallel to solve problems, that, previously, could be addressed sequentially or by using supercomputers. Grid Computing is a technique developed to elaborate enormous amounts of data and enables large-scale resource sharing to solve problem by exploiting distributed scenarios. The main advantage of Grid is due to parallel computing, indeed if a problem can be split in smaller tasks, that can be executed independently, its solution calculation fasten up considerably. To exploit this advantage, it is necessary to identify a technique able to split original electromagnetic task into a set of smaller subproblems. The Domain Decomposition (DD) technique, based on the block generation algorithm introduced in Matekovits et al. (2007) and Francavilla et al. (2011), perfectly addresses our requirements (see Section 3.4 for details). In this chapter, a Grid Computing infrastructure is presented. This architecture allows parallel block execution by distributing tasks to nodes that belong to the Grid. The set of nodes is composed by physical machines and virtualized ones. This feature enables great flexibility and increase available computational power. Furthermore, the presence of virtual nodes allows a full and efficient Grid usage, indeed the presented architecture can be used by different users that run different applications

Test generation from P systems using model checking

This paper presents some testing approaches based on model checking and using different testing criteria. First, test sets are built from different Kripke structure representations. Second, various rule coverage criteria for transitional, non-deterministic, cell-like P systems, are considered in order to generate adequate test sets. Rule based coverage criteria (simple rule coverage, context-dependent rule coverage and variants) are defined and, for each criterion, a set of LTL (Linear Temporal Logic) formulas is provided. A codification of a P system as a Kripke structure and the sets of LTL properties are used in test generation: for each criterion, test cases are obtained from the counterexamples of the associated LTL formulas, which are automatically generated from the Kripke structure codification of the P system. The method is illustrated with an implementation using a specific model checker, NuSMV. (C) 2010 Elsevier Inc. All rights reserved

Finding The Lazy Programmer's Bugs

Traditionally developers and testers created huge numbers of explicit tests, enumerating interesting cases, perhaps biased by what they believe to be the current boundary conditions of the function being tested. Or at least, they were supposed to. A major step forward was the development of property testing. Property testing requires the user to write a few functional properties that are used to generate tests, and requires an external library or tool to create test data for the tests. As such many thousands of tests can be created for a single property. For the purely functional programming language Haskell there are several such libraries; for example QuickCheck [CH00], SmallCheck and Lazy SmallCheck [RNL08]. Unfortunately, property testing still requires the user to write explicit tests. Fortunately, we note there are already many implicit tests present in programs. Developers may throw assertion errors, or the compiler may silently insert runtime exceptions for incomplete pattern matches. We attempt to automate the testing process using these implicit tests. Our contributions are in four main areas: (1) We have developed algorithms to automatically infer appropriate constructors and functions needed to generate test data without requiring additional programmer work or annotations. (2) To combine the constructors and functions into test expressions we take advantage of Haskell's lazy evaluation semantics by applying the techniques of needed narrowing and lazy instantiation to guide generation. (3) We keep the type of test data at its most general, in order to prevent committing too early to monomorphic types that cause needless wasted tests. (4) We have developed novel ways of creating Haskell case expressions to inspect elements inside returned data structures, in order to discover exceptions that may be hidden by laziness, and to make our test data generation algorithm more expressive. In order to validate our claims, we have implemented these techniques in Irulan, a fully automatic tool for generating systematic black-box unit tests for Haskell library code. We have designed Irulan to generate high coverage test suites and detect common programming errors in the process

Developing a distributed electronic health-record store for India

The DIGHT project is addressing the problem of building a scalable and highly available information store for the Electronic Health Records (EHRs) of the over one billion citizens of India

A Study of Concurrency Bugs and Advanced Development Support for Actor-based Programs

The actor model is an attractive foundation for developing concurrent applications because actors are isolated concurrent entities that communicate through asynchronous messages and do not share state. Thereby, they avoid concurrency bugs such as data races, but are not immune to concurrency bugs in general. This study taxonomizes concurrency bugs in actor-based programs reported in literature. Furthermore, it analyzes the bugs to identify the patterns causing them as well as their observable behavior. Based on this taxonomy, we further analyze the literature and find that current approaches to static analysis and testing focus on communication deadlocks and message protocol violations. However, they do not provide solutions to identify livelocks and behavioral deadlocks. The insights obtained in this study can be used to improve debugging support for actor-based programs with new debugging techniques to identify the root cause of complex concurrency bugs.Comment: - Submitted for review - Removed section 6 "Research Roadmap for Debuggers", its content was summarized in the Future Work section - Added references for section 1, section 3, section 4.3 and section 5.1 - Updated citation