Enabling virtual radio functions on software defined radio for future wireless networks

Today's wired networks have become highly flexible, thanks to the fact that an increasing number of functionalities are realized by software rather than dedicated hardware. This trend is still in its early stages for wireless networks, but it has the potential to improve the network's flexibility and resource utilization regarding both the abundant computational resources and the scarce radio spectrum resources. In this work we provide an overview of the enabling technologies for network reconfiguration, such as Network Function Virtualization, Software Defined Networking, and Software Defined Radio. We review frequently used terminology such as softwarization, virtualization, and orchestration, and how these concepts apply to wireless networks. We introduce the concept of Virtual Radio Function, and illustrate how softwarized/virtualized radio functions can be placed and initialized at runtime, allowing radio access technologies and spectrum allocation schemes to be formed dynamically. Finally we focus on embedded Software-Defined Radio as an end device, and illustrate how to realize the placement, initialization and configuration of virtual radio functions on such kind of devices

On Modelling and Analysis of Dynamic Reconfiguration of Dependable Real-Time Systems

This paper motivates the need for a formalism for the modelling and analysis of dynamic reconfiguration of dependable real-time systems. We present requirements that the formalism must meet, and use these to evaluate well established formalisms and two process algebras that we have been developing, namely, Webpi and CCSdp. A simple case study is developed to illustrate the modelling power of these two formalisms. The paper shows how Webpi and CCSdp represent a significant step forward in modelling adaptive and dependable real-time systems.Comment: Presented and published at DEPEND 201

An Efficient Data Structure for Dynamic Two-Dimensional Reconfiguration

In the presence of dynamic insertions and deletions into a partially reconfigurable FPGA, fragmentation is unavoidable. This poses the challenge of developing efficient approaches to dynamic defragmentation and reallocation. One key aspect is to develop efficient algorithms and data structures that exploit the two-dimensional geometry of a chip, instead of just one. We propose a new method for this task, based on the fractal structure of a quadtree, which allows dynamic segmentation of the chip area, along with dynamically adjusting the necessary communication infrastructure. We describe a number of algorithmic aspects, and present different solutions. We also provide a number of basic simulations that indicate that the theoretical worst-case bound may be pessimistic.Comment: 11 pages, 12 figures; full version of extended abstract that appeared in ARCS 201

Membrane-based design and management methodology for parallel dynamically reconfigurable embedded systems

International audiencePartial and dynamic reconfiguration provides a relevant new dimension to design efficient parallel embedded systems. However, due to the encasing complexity of such systems, ensuring the consistency and parallelism management at runtime is still a key challenge. So architecture models and design methodology are required to allow for efficient component reuse and hardware reconfiguration management.This paper presents a distributed persistence management model and its implementation for reconfigurable multiprocessor systems on dynamically reconfigurable circuits. The proposed approach is inspired from the well-known component based models used in software applications development. Our model is based on membranes wrapping the systems components. The objective is to improve design productivity and ensure consistency by managing context switching and storage using modular distributed hardware controllers. These membranes are distributed and optimized with the aim to design self-adaptive systems by allowing dynamic changes in parallelism degree and contexts migration. Simulation and synthesis results are given to show performances and effectiveness of our methodology

FPGA dynamic and partial reconfiguration : a survey of architectures, methods, and applications

Dynamic and partial reconfiguration are key differentiating capabilities of field programmable gate arrays (FPGAs). While they have been studied extensively in academic literature, they find limited use in deployed systems. We review FPGA reconfiguration, looking at architectures built for the purpose, and the properties of modern commercial architectures. We then investigate design flows, and identify the key challenges in making reconfigurable FPGA systems easier to design. Finally, we look at applications where reconfiguration has found use, as well as proposing new areas where this capability places FPGAs in a unique position for adoption

High Level Design of adaptive distributed controller for Partial Dynamic reconfiguration in FPGA

International audienceControlling dynamic and partial reconfigurations becomes one of the most important key issues in modern embedded systems design. In fact, in such systems, the reconfiguration controller can significantly affect the system performances. Indeed, the controller has to handle efficiently three major tasks during runtime: observation (monitoring), taking reconfiguration decisions and notify decisions to the rest of the system in order to realize it. We present in this paper a novel high level approach permitting to model, using MARTE UML profile, modular and flexible distributed controllers for dynamic reconfiguration management. This approach permits components/ models reuse and allows systematic code generation. It consequently makes reconfigurable systems design less tedious and reduces time to market

Time-Shared Execution of Realtime Computer Vision Pipelines by Dynamic Partial Reconfiguration

This paper presents an FPGA runtime framework that demonstrates the feasibility of using dynamic partial reconfiguration (DPR) for time-sharing an FPGA by multiple realtime computer vision pipelines. The presented time-sharing runtime framework manages an FPGA fabric that can be round-robin time-shared by different pipelines at the time scale of individual frames. In this new use-case, the challenge is to achieve useful performance despite high reconfiguration time. The paper describes the basic runtime support as well as four optimizations necessary to achieve realtime performance given the limitations of DPR on today's FPGAs. The paper provides a characterization of a working runtime framework prototype on a Xilinx ZC706 development board. The paper also reports the performance of realtime computer vision pipelines when time-shared

Model-based design of correct controllers for dynamically reconfigurable architectures

International audienceDynamically reconfigurable hardware has been identified as a promising solution for the design of energy efficient embedded systems. However, its adoption is limited by the costly design effort including verification and validation, which is even more complex than for non dynamically reconfigurable systems. In this paper, we propose a tool-supported formal method to automatically design a correct-by-construction control of the reconfiguration. By representing system behaviors with automata, we exploit automated algorithms to synthesize controllers that safely enforce reconfiguration strategies formulated as properties to be satisfied by control. We design generic modeling patterns for a class of reconfigurable architectures, taking into account both hardware architecture and applications, as well as relevant control objectives. We validate our approach on two case studies implemented on FPGAs

A TrustZone-assisted hypervisor supporting dynamic partial reconfiguration

Dissertação de mestrado em Engenharia Eletrónica Industrial e ComputadoresTraditionally, embedded systems were dedicated single-purpose systems characterised by hardware resource constraints and real-time requirements. However, with the growing computing abilities and resources on general purpose platforms, systems that were formerly divided to provide different functions are now merging into one System on Chip. One of the solutions that allows the coexistence of heterogeneous environments on the same hardware platform is virtualization technology, usually in the form of an hypervisor that manage different instances of OSes and arbitrate their execution and resource usage, according to the chosen policy. ARM TrustZone has been one of the technologies used to implement a virtualization solution with low overhead and low footprint. µRTZVisor a TrustZoneassisted hypervisor with a microkernel-like architecture - is a bare-metal embedded hypervisor that relies on TrustZone hardware to provide the foundation to implement strong spatial and temporal isolation between multiple guest OSes. The use of Partial Reconfiguration allows the designer to define partial reconfigurable regions in the FPGA and reconfigure them during runtime. This allows the system to have its functionalities changed during runtime using Dynamic Partial Reconfiguration (DPR), without needing to reconfigure all the FPGA. This is a major advantage, as it decreases the configuration overhead since partial bitstreams are smaller than full bitstreams and the reconfiguration time is shorter. Another advantage is reducing the need for larger logic areas and consequently reducing their power consumption. Therefore, a hypervisor that supports DPR brings benefits to the system. Aside from better FPGA resources usage, another improvement that it brings, is when critical hardware modules misbehave and the hardware module can be replaced. It also enables the controlling and changing of hardware accelerators dynamically, which can be used to meet the guest OSes requests for hardware resources as the need appears. The propose of this thesis is extending the µRTZVisor to have a DPR mechanism.Tradicionalmente, os sistemas embebidos eram sistemas dedicados a uma única tarefa e apenas limitados pelos seus requisitos de tempo real e de hardware. Contudo, como as plataformas de uso geral têm cada vez mais recursos e capacidade de processamento, muitos dos sistemas que executavam separadamente, passaram a apenas um sistema em plataforma recorrendo à tecnologia de virtualização, normalmente como um hipervisor que é capaz de gerir múltiplos sistemas operativos arbitrando a sua execução e acesso aos recursos da plataforma de acordo com uma politica predefinida. A tecnologia TrustZone da ARM tem sido uma das soluções implementadas sem ter grande impacto na performance dos sistemas operativos. µRTZVisor é um dos hipervisores baseados na TrustZone para implementar um isolamento espacial e temporal entre múltiplos sistemas operativos, sendo que defere de outras uma vez que é de arquitectura microkernel. O uso de Reconfiguração Parcial Dinâmica (RPD) permite ao designer definir várias regiões reconfiguráveis no FPGA que podem ser dinamicamente reconfiguradas durante o período de execução. Esta é uma grande vantagem, porque reduz os tempos de reconfiguração de módulos reconfiguráveis uma vez que os seus bitstreams são mais pequenos que bitstreams para a plataforma toda. A tecnologia também permite que nos FPGAs não sejam necessárias áreas lógicas tão grandes, o que também reduz o consumo de energia da plataforma. Um hipervisor que suporte RPD traz grandes benefícios para o sistema, nomeadamente melhor uso dos recursos de FPGA, implementação de aceleradores em hardware dinamicamente reconfiguráveis, e tratamento de falhas no hardware. Se houverem módulos que estejam a demonstrar comportamentos inesperados estes podem ser reconfigurados. O uso de aceleradores reconfiguráveis permite que o hardware seja adaptável conforme a necessidade destes pelos diferentes sistemas operativos. A proposta desta dissertação é então estender o µRTZVisor para ter a capacidade de usar módulos reconfiguráveis por RPD