Ultra Wideband

Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations

Tracking and data system support for the Viking 1975 mission to Mars. Volume 1: Prelaunch planning, implementation, and testing

The tracking and data acquisition support for the 1975 Viking Missions to Mars is described. The history of the effort from its inception in late 1968 through the launches of Vikings 1 and 2 from Cape Kennedy in August and September 1975 is given. The Viking mission requirements for tracking and data acquisition support in both the near earth and deep space phases involved multiple radar tracking and telemetry stations, and communications networks together with the global network of tracking stations, communications, and control center. The planning, implementation, testing and management of the program are presented

A Partial Discharge Measurement Technique for Applied Square Pulse Voltage with 50 NS Rise Times

During the fabrication of solid electrical insulation, small cavities known as micro voids may form in the material. As electrical stress increases in this micro void, the breakdown probability also increases. This type of electrical breakdown is commonly known as partial discharge. Magnitudes of partial discharge currents are typically small but enough to cause degradation of the electrical insulation. To study degradation for fast-rise time voltage square pulse train, partial discharge measurement is needed. In current studies, partial discharge pulse widths have been measured in the range of nanoseconds. The best approach for measurement at ultra wide band frequencies is a bridge type measurement system, to reduce external noise and improve sensitivity to PD currents. The bridge configuration can be used with samples instead of one sample and one coupling capacitor. Identically created samples will have a close match for impedance and frequency response. This type of bridge also helps to reduce other sources of measured current such as the high displacement currents due to fast rise time square pulse voltage on the samples. Further improvement includes simultaneous measurements using a “linked” bridge configuration, where bridges share a common sample. A directly connected measurement current shunt should be used for high sensitivity with a uniform ultra wide band frequency response. Post-measurement digital signal processing (DSP) algorithms will perform the task of pulse discrimination and time delay from the pulse front. This research presents a method to improve the measurement of partial discharge when applied voltage is non-sinusoidal, with high frequency components. The improvements are apparent when square pulse voltage rise times are less than 50 ns. Ultra wide band measurements of physical samples will be performed for short time duration with a digital storage oscilloscope. A DSP algorithm is used to filter residual noise from the partial discharge current. The presented measurement technique for samples for this study is an original approach. Sample results demonstrate the effectiveness of the technique

Towards an Optimal Photonic Network: Optimising Performance, Cost and Flexibility

This thesis investigates optical fibre transmission system technologies, and their impact on network architectures with the objective of lowering unit cost ($/Gb/s/km) of data transmission in long-haul, and ultra long-haul dense wavelength division multiplexing (DWDM) photonic networks. The importance of this work is driven by the exponential growth in Internet traffic of around 40% p.a., and economic pressures constraining network operators’ ability to invest in their networks. Optical transport networks must therefore be designed to meet future bandwidth demands of end users, with optimum performance, cost and flexibility. Dynamic gain equalisers (DGEs) are a key sub-system of ultra long-haul networks, enabling increased un-regenerated transmission reach and elimination of expensive optical-electrical-optical (OEO) regeneration. A theoretical framework was developed integrating models of wideband power variation, together with narrowband nonlinear propagation simulations using the split-step Fourier method. The optimum spacing of the also costly DGEs was determined for a 3,000km network field deployment. Optimum power pre-emphasis profiles were predicted and compared with simple linear calculations, showing <0.7dB performance penalty using the much faster, simplified method. Optical dispersion management schemes were studied, with optical dispersion compensating fibre placed after every other span resulting in 6% cost reduction and little performance degradation compared to compensation after every span. A techno-economic comparison of optical and electronic dispersion compensation (EDC) strategies showed 25% cost reduction using EDC. Tolerance to fibre nonlinearities is reduced compared to optical compensation; splitting the EDC function equally between transmitter and receiver optimises performance. Economic benefits of a single flexible, multi-reach DWDM system were investigated showing almost 20% cost savings compared to separate long-haul and ultra long-haul systems. Finally, the techno-economic benefits of optical bypass in meshed networks were analysed for increasing levels of optical transparency: from OEO regenerated to multi-degree reconfigurable optical add-drop multiplexers (MD-ROADMs), enabling up to 46% cost saving

The deep space network

The objectives, functions, and organization of the Deep Space Network are summarized. Deep space station, ground communication, and network operations control capabilities are described

LASER Tech Briefs, Spring 1994

Topics in this Laser Tech Brief include: Electronic Components and Circuits. Electronic Systems, Physical Sciences, Materials, Mechanics, Fabrication Technology, and books and reports

Design and analysis of wideband passive microwave devices using planar structures

A selected volume of work consisting of 84 published journal papers is presented to demonstrate the contributions made by the author in the last seven years of his work at the University of Queensland in the area of Microwave Engineering. The over-arching theme in the author’s works included in this volume is the engineering of novel passive microwave devices that are key components in the building of any microwave system. The author’s contribution covers innovative designs, design methods and analyses for the following key devices and associated systems: Wideband antennas and associated systems Band-notched and multiband antennas Directional couplers and associated systems Power dividers and associated systems Microwave filters Phase shifters Much of the motivation for the work arose from the desire to contribute to the engineering o

Customer premise service study for 30/20 GHz satellite system

Satellite systems in which the space segment operates in the 30/20 GHz frequency band are defined and compared as to their potential for providing various types of communications services to customer premises and the economic and technical feasibility of doing so. Technical tasks performed include: market postulation, definition of the ground segment, definition of the space segment, definition of the integrated satellite system, service costs for satellite systems, sensitivity analysis, and critical technology. Based on an analysis of market data, a sufficiently large market for services is projected so as to make the system economically viable. A large market, and hence a high capacity satellite system, is found to be necessary to minimize service costs, i.e., economy of scale is found to hold. The wide bandwidth expected to be available in the 30/20 GHz band, along with frequency reuse which further increases the effective system bandwidth, makes possible the high capacity system. Extensive ground networking is required in most systems to both connect users into the system and to interconnect Earth stations to provide spatial diversity. Earth station spatial diversity is found to be a cost effective means of compensating the large fading encountered in the 30/20 GHz operating band

Time domain synthetic aperture radar image processing using fast factorised backprojection

Includes bibliographical references (leaves 114-115).Fast Factorised Backprojection(FFBP) is a Synthetic Aperture Radar (SAR) focusing technique which uses Filtered Backprojection(FBP) to produce high quality images in the spatial domain at speeds which rival spectral domain SAR focusing methods. Synthetic Aperture Radar (SAR) focusing is fundamentally a matched filtering process which can be performed both in the spatial or spectral domain. Spatial domain SAR focusing techniques like filtered backprojection can, in theory, completely recover the scene from data with an infinite bandwidth acquired using an isotropic antenna along an arbitrary curved flight path of infinite length. This means that the focusing of a image using filtered backprojection is only limited by a finite bandwidth, non isotropic beam width and a finite flight path length. However filtered backprojection with an operation count which is proportional to 0 (n3 ) is computationally inefficient in speed when compared to the frequency domain SAR image reconstruction algorithms with an operational count which is proportional to 0 (n2 10g (n))