Investigation of the double ramp in hypersonic flow using luminescent measurement systems

Compression ramp flows in supersonic and hypersonic environments present unique flow patterns for shock wave-boundary layer interaction studies. They also represent the generic geometry of two-dimensional inlets and deflected control surfaces for re-entry vehicles. Therefore, a detailed knowledge of the flow behaviour created by such geometries is critical for optimum design. The flow is made more complicated due to the presence of separation regions and streamwise Görtler vortices. The objective of the current research is to study the behaviour and characteristics of the flow over the double ramp model placed in hypersonic flow at freestream Mach number of 5. Three different incidence angles of 0°, −2°, and −4° are studied using colour Schlieren and luminescent paints consisting of anodized aluminium pressure-sensitive paint (AA-PSP) and the temperature-sensitive paint (TSP) technique. The colour Schlieren provides description of the external flow while the global surface pressure and temperature distribution is obtained through the AA-PSP and TSP methods. The TSP technique also proves that it is very effective in identifying the location and properties of the Görtler vortices; revealing the effect of incidence on the magnitude and pattern of Görtler vortices formed

Transverse jet-cavity interactions with the influence of an impinging shock

For high-speed air breathing engines, fuel injection and subsequent mixing with air is paramount for combustion. The high freestream velocity poses a great challenge to efficient mixing both in macroscale and microscale. Utilising cavities downstream of fuel injection locations, as a means to hold the flow and stabilise the combustion, is one mechanism which has attracted much attention, requiring further research to study the unsteady flow features and interactions occurring within the cavity. In this study we combine the transverse jet injection upstream of a cavity with an impinging shock to see how this interaction influences the cavity flow, since impinging shocks have been shown to enhance mixing of transverse jets. Utilising qualitative and quantitative methods: schlieren, oilflow, PIV, and PSP the induced flowfield is analysed. The impinging shock lifts the shear layer over the cavity and combined with the instabilities generated by the transverse jet creates a highly complicated flowfield with numerous vertical structures. The interaction between the oblique shock and the jet leads to a relatively uniform velocity distribution within the cavity

Aeroacoustic Characteristics of a Rectangular Multi-Element Supersonic Jet Mixer-Ejector Nozzle

This paper provides a unique, detailed evaluation of the acoustics and aerodynamics of a rectangular multi-element supersonic jet mixer-ejector noise suppressor. The performance of such mixer-ejectors is important in aircraft engine application for noise suppression and thrust augmentation. In contrast to most prior experimental studies on ejectors that reported either aerodynamic or acoustic data, our work documents both types of data. We present information on the mixing, pumping, ejector wall pressure distribution, thrust augmentation and noise suppression characteristics of four simple, multi-element, jet mixer-ejector configurations. The four configurations included the effect of ejector area ratio (AR = ejector area/primary jet area) and the effect of non-parallel ejector walls. We also studied in detail the configuration that produced the best noise suppression characteristics. Our results show that ejector configurations that produced the maximum maximum pumping (entrained flow per secondary inlet area) also exhibited the lowest wall pressures in the inlet region, and the maximum thrust augmentation. When cases having the same total mass flow were compared, we found that noise suppression trends corresponded with those for pumping. Surprisingly, the mixing (quantified by the peak Mach number, and flow uniformity) at the ejector exit exhibited no relationship to the noise suppression at moderate primary jet fully expanded Mach numbers (Mj is less than 1.4). However, the noise suppression dependence on the mixing was apparent at higher Mj. The above observations are justified by noting that the mixing at the ejector exit is ot a strong factor in determining the radiated noise when noise produced internal to the ejector dominates the noise field outside the ejector

Application of Pressure Sensitive Paint to Confined Flow at Mach Number 2.5

Pressure sensitive paint (PSP) is a novel technology that is being used frequently in external aerodynamics. For internal flows in narrow channels, and applications at elevated nonuniform temperatures, however, there are still unresolved problems that complicate the procedures for calibrating PSP signals. To address some of these problems, investigations were carried out in a narrow channel with supersonic flows of Mach 2.5. The first set of tests focused on the distribution of the wall pressure in the diverging section of the test channel downstream of the nozzle throat. The second set dealt with the distribution of wall static pressure due to the shock/wall interaction caused by a 25 deg. wedge in the constant Mach number part of the test section. In addition, the total temperature of the flow was varied to assess the effects of temperature on the PSP signal. Finally, contamination of the pressure field data, caused by internal reflection of the PSP signal in a narrow channel, was demonstrated. The local wall pressures were measured with static taps, and the wall pressure distributions were acquired by using PSP. The PSP results gave excellent qualitative impressions of the pressure field investigated. However, the quantitative results, specifically the accuracy of the PSP data in narrow channels, show that improvements need to be made in the calibration procedures, particularly for heated flows. In the cases investigated, the experimental error had a standard deviation of +/- 8.0% for the unheated flow, and +/- 16.0% for the heated flow, at an average pressure of 11 kpa

Flow of supersonic jets across flat plates: Implications for ground-level flow from volcanic blasts

We report on laboratory experiments examining the interaction of a jet from an overpressurized reservoir with a canonical ground surface to simulate lateral blasts at volcanoes such as the 1980 blast at Mount St. Helens. These benchmark experiments test the application of supersonic jet models to simulate the flow of volcanic jets over a lateral topography. The internal shock structure of the free jet is modified such that the Mach disk shock is elevated above the surface. In elevation view, the width of the shock is reduced in comparison with a free jet, while in map view the dimensions are comparable. The distance of the Mach disk shock from the vent is in good agreement with free jet data and can be predicted with existing theory. The internal shock structures can interact with and penetrate the boundary layer. In the shock-boundary layer interaction, an oblique shock foot is present in the schlieren images and a distinctive ground signature is evident in surface measurements. The location of the oblique shock foot and the surface demarcation are closely correlated with the Mach disk shock location during reservoir depletion, and therefore, estimates of a ground signature in a zone devastated by a blast can be based on the calculated shock location from free jet theory. These experiments, combined with scaling arguments, suggest that the imprint of the Mach disk shock on the ground should be within the range of 4–9 km at Mount St. Helens depending on assumed reservoir pressure and vent dimensions

The benefit of high-conductivity materials in film cooled turbine nozzles

This study presents an experimental and numerical investigation of the beneficial effect of higher conductivity materials in HP turbine nozzles. Most of the literature studies focus on the maximum temperature that a nozzle can withstand, whereas the effect of thermal gradients is often neglected. However thermal gradients have higher influence on the life of the components and they have to be given careful consideration. In this work it is shown that thermal gradients are reduced by using high conductivity materials and, as a consequence, the nozzles life is appreciably increased. A representative film cooled leading edge with an internal impingement plate was studied experimentally at Texas AM University. Two materials were used, namely polycarbonate and stainless steel, in order to highlight the impact of conduction on coolant effectiveness. Numerically conjugate heat transfer simulations have been carried out with an in house solver to analyse in detail the impact of conduction and internal convection. Both experimental and numerical results show that by increasing the conductivity in the solid region, the thermal gradients are strongly reduced. Numerically it is shown that using inserts of nickel-aluminide alloys in nozzles may reduce the thermal gradients from 3 to 4 times if compared to nowadays design. © 2012 Elsevier Inc