Gate Delay Fault Test Generation for Non-Scan Circuits

This article presents a technique for the extension of delay fault test pattern generation to synchronous sequential circuits without making use of scan techniques. The technique relies on the coupling of TDgen, a robust combinational test pattern generator for delay faults, and SEMILET, a sequential test pattern generator for several static fault models. The approach uses a forward propagation-backward justification technique: The test pattern generation is started at the fault location, and after successful ¿local¿ test generation fault effect propagation is performed and finally a synchronising sequence to the required state is computed. The algorithm is complete for a robust gate delay fault model, which means that for every testable fault a test will be generated, assuming sufficient time. Experimental results for the ISCAS'89 benchmarks are presented in this pape

Critical hazard free test generation for asynchronous circuits

Journal ArticleWe describe a technique to generate critical hazard-free tests for self-timed control circuits build using a macromodule library, in a partial scan based DFT environment. We propose a 6 valued algebra to generate these tests which are guaranteed to be critical hazard free under an unbounded delay model. This algebra has been incorporated in a D-algorithm based automatic test pattern generator

ACT: A DFT tool for self-timed circuits

Journal ArticleThis paper presents a Design for Testability (DFT) tool called ACT (Asynchronous Circuit Testing) which uses a partial scan technique to make macro-module based selftimed circuits testable. The ACT tool is the first oFits kind for testing macro-module based self-timed circuits. ACT modifies designs automatically to incorporate partial scan and provides a complete path from schematic capturie to physical layout. It also has a test generation system to generate vectors for the testable design and to compute fault coverage of the generated tests. The test generatioin system includes a module for doing critical hazard free (.est generation using a new 6-valued algebra. ACT has been hilt around commercial tools from Viewlogic and Cascade. A Viewlogic schematic is used as the design entry point and Cascade tools are used for technology mapping

Deductive Fault Simulation Technique for Asynchronous Circuits

Fault simulator for acpASC needs to deal with hazards, oscillations and races. The simplest algorithm for simulating faults is the serial fault simulation technique which was successfully used for the acpASC. Faster fault simulation techniques, for example deductive fault simulation, was previously used for the combinational and synchronous sequential circuits only. In this paper a deductive fault simulator for the stuck-at faults of acSI acpASC is presented. An algorithm for the propagation of the fault lists is proposed which can deal with the complex gates of the acpASC. The implemented deductive fault simulator was tested using acSI benchmark circuits. The experimental results show significant reduction of the computation time and negligible increase of the memory requirements in comparison with the serial fault simulation technique

Modeling and measurement of fault-tolerant multiprocessors

The workload effects on computer performance are addressed first for a highly reliable unibus multiprocessor used in real-time control. As an approach to studing these effects, a modified Stochastic Petri Net (SPN) is used to describe the synchronous operation of the multiprocessor system. From this model the vital components affecting performance can be determined. However, because of the complexity in solving the modified SPN, a simpler model, i.e., a closed priority queuing network, is constructed that represents the same critical aspects. The use of this model for a specific application requires the partitioning of the workload into job classes. It is shown that the steady state solution of the queuing model directly produces useful results. The use of this model in evaluating an existing system, the Fault Tolerant Multiprocessor (FTMP) at the NASA AIRLAB, is outlined with some experimental results. Also addressed is the technique of measuring fault latency, an important microscopic system parameter. Most related works have assumed no or a negligible fault latency and then performed approximate analyses. To eliminate this deficiency, a new methodology for indirectly measuring fault latency is presented

Scan cell design for enhanced delay fault testability

Problems in testing scannable sequential circuits for delay faults are addressed. Modifications to improve circuit controllability and observability for the testing of delay faults are implemented efficiently in a scan cell design. A layout on a gate array is designed and evaluated for this scan cel

Testing self-timed circuits using partial scan

Journal ArticleThis paper presents a partial scan method for testing both the control and data path parts of macromodule based self-timed circuits for stuck-at faults. Compared with other proposed test methods for testing control paths in self-timed circuits, this technique offers better fault coverage under a stuck-at input model than methods using self-checking properties, and requires fewer storage elements to be made scanable than full scan approaches with similar fault coverage. A new method is proposed to test the sequential network in the control path in this partial scan environment. The partial scan approach has also been applied to datapaths, where structural analysis is used to select which latches should be made scannable to break cycles in the circuit. Experimental data is presented to show that high fault coverage is possible using this method with only a subset of storage elements in the control and data paths being made scannable

A fault-tolerant multiprocessor architecture for aircraft, volume 1

A fault-tolerant multiprocessor architecture is reported. This architecture, together with a comprehensive information system architecture, has important potential for future aircraft applications. A preliminary definition and assessment of a suitable multiprocessor architecture for such applications is developed

A partial scan methodology for testing self-timed circuits

technical reportThis paper presents a partial scan method for testing control sections of macromodule based self-timed circuits for stuck-at faults. In comparison with other proposed test methods for self-timed circuits, this technique offers better fault coverage than methods using self-checking techniques, and requires fewer storage elements to be made scannable than full scan approaches with similar fault coverage. A new method is proposed to test the sequential network in this partial scan environment. Experimental data is presented to show that high fault coverage is possible using this method with only a subset of storage elements being made scannable