Performance enhancement of wireless communication systems through QoS optimisation

Providing quality of service (QoS) in a communication network is essential but challenging, especially when the complexities of wireless and mobile networks are added. The issues of how to achieve the intended performances, such as reliability and efficiency, at the minimal resource cost for wireless communications and networking have not been fully addressed. In this dissertation, we have investigated different data transmission schemes in different wireless communication systems such as wireless sensor network, device-to-device communications and vehicular networks. We have focused on cooperative communications through relaying and proposed a method to maximise the QoS performance by finding optimum transmission schemes. Furthermore, the performance trade-offs that we have identified show that both cooperative and non-cooperative transmission schemes could have advantages as well as disadvantages in offering QoS. In the analytical approach, we have derived the closed-form expressions of the outage probability, throughput and energy efficiency for different transmission schemes in wireless and mobile networks, in addition to applying other QoS metrics such as packet delivery ratio, packet loss rate and average end-to-end delay. We have shown that multi-hop relaying through cooperative communications can outperform non-cooperative transmission schemes in many cases. Furthermore, we have also analysed the optimum required transmission power for different transmission ranges to obtain the maximum energy efficiency or maximum achievable data rate with the minimum outage probability and bit error rate in cellular network. The proposed analytical and modelling approaches are used in wireless sensor networks, device-to-device communications and vehicular networks. The results generated have suggested an adaptive transmission strategy where the system can decide when and how each of transmission schemes should be adopted to achieve the best performance in varied conditions. In addition, the system can also choose proper transmitting power levels under the changing transmission distance to increase and maintain the network reliability and system efficiency accordingly. Consequently, these functions will lead to the optimized QoS in a given network

Motorway Vehicular Networks with Renewable Energy Powered Access Points

The goal of this work is to consider the potential of using renewable energy only to power roadside units (RSUs), which not only reduces CO2 footprint but also reduces the infrastructure needed in motorway vehicular communication. The thesis begins with collation and analysis of wind and motorway traffic data for the purpose of determining the energy demand of vehicular networks as well as the energy supply obtainable from wind. This is followed by the study of a standalone RSU powered by wind energy. Small size standalone wind energy systems which have benefits of low cost, easy and large scale deployments are implemented for the low power RSUs. The concept of wind energy based rate adaptation is introduced and implemented in the RSU through which RSU can vary transmission power according to the availability of wind energy. This reduces the outage and improves the overall service quality. Traditionally rate adaptation was employed to cater for wireless channel unavailability. A queuing model for the RSU is developed and verified through simulation to evaluate the performance in terms of delay, packet loss and utilisation. Channel fading is considered and the performance of the RSU is re-evaluated in terms of the same quality of service parameters, viz. delay, packet loss and utilisation to investigate the impact of fading in the network. Next, the reliability of the RSU is redefined in the context of unavailability of sufficient wind power. The transient nature of wind energy causes the RSUs to either transmit at full data rate or not transmit at all depending on the availability of sufficient energy. Thus, a failure occurs when the wind power is less than the load. Therefore, a framework has been developed for redefining a number of reliability parameters in the context of wind powered RSUs. A detailed wind data analysis was carried out based upon the hourly wind speed obtained from the UK air information resource (AIR) database for a period of five years, to determine the energy model of the deployed micro-turbine. An energy storage device (a small battery) is connected to the micro-wind turbine for improved service quality

Blockchain-Based Security Architecture for Unmanned Aerial Vehicles in B5G/6G Services and Beyond: A Comprehensive Approach

Unmanned Aerial Vehicles (UAVs), previously favored by enthusiasts, have evolved into indispensable tools for effectively managing disasters and responding to emergencies. For example, one of their most critical applications is to provide seamless wireless communication services in remote rural areas. Thus, it is substantial to identify and consider the different security challenges in the research and development associated with advanced UAV-based B5G/6G architectures. Following this requirement, the present study thoroughly examines the security considerations about UAVs in relation to the architectural framework of the 5G/6G system, the technologies that facilitate its operation, and the concerns surrounding privacy. It exhibits security integration at all the protocol stack layers and analyzes the existing mechanisms to secure UAV-based B5G/6G communications and its energy and power optimization factors. Last, this article also summarizes modern technological trends for establishing security and protecting UAV-based systems, along with the open challenges and strategies for future research work.Comment: 25 pages, 6 figures, 3 table

Architecture design for disaster resilient management network using D2D technology

Huge damages from natural disasters, such as earthquakes, floods, landslide, tsunamis, have been reported in recent years, claiming many lives, rendering millions homeless and causing huge financial losses worldwide. The lack of effective communication between the public rescue/safety agencies, rescue teams, first responders and trapped survivors/victims makes the situation even worse. Factors like dysfunctional communication networks, limited communications capacity, limited resources/services, data transformation and effective evaluation, energy, and power deficiency cause unnecessary hindrance in rescue and recovery services during a disaster. The new wireless communication technologies are needed to enhance life-saving capabilities and rescue services. In general, in order to improve societal resilience towards natural catastrophes and develop effective communication infrastructure, innovative approaches need to be initiated to provide improved quality, better connectivity in the events of natural and human disasters. In this thesis, a disaster resilient network architecture is proposed and analysed using multi-hop communications, clustering, energy harvesting, throughput optimization, reliability enhancement, adaptive selection, and low latency communications. It also examines the importance of mode selection, power management, frequency and time resource allocation to realize the promises of Long-term Evolution (LTE) Device to Device (D2D) communication. In particular, to support resilient and energy efficient communication in disaster-affected areas. This research is examined by thorough and vigorous simulations and validated through mathematical modelling. Overall, the impact of this research is twofold: i) it provides new technologies for effective inter- and intra-agency coordination system during a disaster event by establishing a stronger and resilient communication; and ii) It offers a potential solution for stakeholders such as governments, rescue teams, and general public with new informed information on how to establish effective policies to cope with challenges before, during and after the disaster events

Wireless Backhaul Architectures for 5G Networks

This thesis investigates innovative wireless backhaul deployment strategies for dense small cells. In particular, the work focuses on improving the resource utilisation, reliability and energy efficiency of future wireless backhaul networks by increasing and exploiting the flexibility of the network. The wireless backhaul configurations and topology management schemes proposed in this thesis consider a dense urban area scenario with static users as well as an ultra-dense outdoor small cell scenario with vehicular traffic (pedestrians, bus users and car users). Moreover, a diverse range of traffic types such as file transfer, ultra-high definition (UHD) on-demand and real-time video streaming are used. In the first part of this thesis, novel dynamic two-tier Software Defined Networking (SDN) architecture is employed in backhaul network to facilitate complex network management tasks including multi-tenancy resource sharing and energy-aware topology management. The results show the proposed architecture can deliver efficient resource utilisation, and QoS guarantee. The second part of the thesis presents wireless backhaul architectures that serve ultra-dense outdoor small cells installed on street-level fixtures. The characteristics of vehicular communications including diverse mobility patterns and unevenly distributed traffic are investigated. The system-level performance of two key technologies for 5G backhaul are compared: massive MIMO backhaul using sub-6GHz band and millimetre (mm)-wave backhaul in the 71 – 76 GHz band. Finally, innovative wireless backhaul architectures delivered from street fibre cabinets for ultra-dense outdoor small cells with vehicular traffic is proposed, which can effectively minimise the need for additional sites, power and fibre infrastructure. Multi-hop backhaul configurations are presented in order to bring in an extra level of flexibility, and thus, improve the coverage of a street cabinet mm-wave backhaul network as well as distribute traffic loads

Recent Advances in Cellular D2D Communications

Device-to-device (D2D) communications have attracted a great deal of attention from researchers in recent years. It is a promising technique for offloading local traffic from cellular base stations by allowing local devices, in physical proximity, to communicate directly with each other. Furthermore, through relaying, D2D is also a promising approach to enhancing service coverage at cell edges or in black spots. However, there are many challenges to realizing the full benefits of D2D. For one, minimizing the interference between legacy cellular and D2D users operating in underlay mode is still an active research issue. With the 5th generation (5G) communication systems expected to be the main data carrier for the Internet-of-Things (IoT) paradigm, the potential role of D2D and its scalability to support massive IoT devices and their machine-centric (as opposed to human-centric) communications need to be investigated. New challenges have also arisen from new enabling technologies for D2D communications, such as non-orthogonal multiple access (NOMA) and blockchain technologies, which call for new solutions to be proposed. This edited book presents a collection of ten chapters, including one review and nine original research works on addressing many of the aforementioned challenges and beyond

Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: vehicular ad-hoc networks, security and caching, TCP in ad-hoc networks and emerging applications. It is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks