Smart remote nodes fed by power over fiber in Internet of Things applications

Smart IoT solutions integrated into power grid stations are important due to their high economic and social value. Power over fiber technology to remotely feeding sensors and control electronics is a good choice in these environments of high electromagnetic interference. A sensing system design for magnetic field monitoring, fire and temperature/presence detection, and remotely fed by optical means is discussed. This design includes two types of nodes, smart and passive. Smart remote nodes have an energy manager to provide power on demand. Asymmetric splitting is proposed to optimize power distribution. Some tests on remote node power consumption, feeding, sensing, and centralized monitoring in one type of those nodes are successfully performed and reported.This work was supported in part by the Spanish Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid and H2020 European Union Programme under Grants TEC2015-63826-C3-2-R and RTI2018-094669-B-C32, and Grant Y2018/EMT-4892 (TEFLON-CM), in part by FSE, and in part by 5G PPP Bluespace project under Grant nº 762055, respectively.Publicad

Optothermotronic effect as an ultrasensitive thermal sensing technology for solid-state electronics

The thermal excitation, regulation, and detection of charge carriers in solid-state electronics have attracted great attention toward high-performance sensing applications but still face major challenges. Manipulating thermal excitation and transport of charge carriers in nanoheterostructures, we report a giant temperature sensing effect in semiconductor nanofilms via optoelectronic coupling, termed optothermotronics. A gradient of charge carriers in the nanofilms under nonuniform light illumination is coupled with an electric tuning current to enhance the performance of the thermal sensing effect. As a proof of concept, we used silicon carbide (SiC) nanofilms that form nanoheterostructures on silicon (Si). The sensing performance based on the thermal excitation of charge carriers in SiC is enhanced by at least 100 times through photon excitation, with a giant temperature coefficient of resistance (TCR) of up to −50%/K. Our findings could be used to substantially enhance the thermal sensing performance of solid-state electronics beyond the present sensing technologies

The 1994 Fiber Optic Sensors for Aerospace Technology (FOSAT) Workshop

The NASA Lewis Research Center conducted a workshop on fiber optic technology on October 18-20, 1994. The workshop objective was to discuss the future direction of fiber optics and optical sensor research, especially in the aerospace arena. The workshop was separated into four sections: (1) a Systems Section which dealt specifically with top level overall architectures for the aircraft and engine; (2) a Subsystems Section considered the parts and pieces that made up the subsystems of the overall systems; (3) a Sensor/Actuators section considered the status of research on passive optical sensors and optical powered actuators; and (4) Components Section which addressed the interconnects for the optical systems (e.g., optical connectors, optical fibers, etc.). This report contains the minutes of the discussion on the workshop, both in each section and in the plenary sessions. The slides used by a limited number of presenters are also included as presented. No attempt was made to homogenize this report. The view of most of the attendees was: (1) the government must do a better job of disseminating technical information in a more timely fashion; (2) enough work has been done on the components, and system level architecture definition must dictate what work should be done on components; (3) a Photonics Steering Committee should be formed to coordinate the efforts of government and industry in the photonics area, to make sure that programs complimented each other and that technology transferred from one program was used in other programs to the best advantage of the government and industry

An Historical Survey on Light Technologies

Following the celebration of the International Year of Light and Light-based Technologies in 2015, this paper presents a survey of the exploitation of light throughout our history. Human beings started using light far into the Stone Age, in order to meet immediate needs, and widened its used when ancient civilizations developed. Other practical uses were conceived during the Middle Ages, some of which had a deep impact on social life. Nevertheless, it was after the Scientific Revolution and, to a wider extent, with the Industrial Revolution, that more devices were developed. The advancement of chemistry and electricity provided the ground and the tools for inventing a number of light-related devices, from photography to chemical and electrical lighting technologies. The deeper and broader scientific advancements of the twentieth century, throughout wave and quanta paradigms and the research on the interactions with matter at the sub-atomic level, have provided the knowledge for a much broader exploitation of light in several different fields, leading to the present technological domains of optoelectronics and photoelectronics, including cinema, image processing, lasers, photovoltaic cells, and optical discs. The recent success of fiber optics, white LEDs, and holography, evidence how vastly and deeply the interaction between light and man is still growing

NASA Tech Briefs, October 2007

Topics covered include; Wirelessly Interrogated Position or Displacement Sensors; Ka-Band Radar Terminal Descent Sensor; Metal/Metal Oxide Differential Electrode pH Sensors; Improved Sensing Coils for SQUIDs; Inductive Linear-Position Sensor/Limit-Sensor Units; Hilbert-Curve Fractal Antenna With Radiation- Pattern Diversity; Single-Camera Panoramic-Imaging Systems; Interface Electronic Circuitry for an Electronic Tongue; Inexpensive Clock for Displaying Planetary or Sidereal Time; Efficient Switching Arrangement for (N + 1)/N Redundancy; Lightweight Reflectarray Antenna for 7.115 and 32 GHz; Opto-Electronic Oscillator Using Suppressed Phase Modulation; Alternative Controller for a Fiber-Optic Switch; Strong, Lightweight, Porous Materials; Nanowicks; Lightweight Thermal Protection System for Atmospheric Entry; Rapid and Quiet Drill; Hydrogen Peroxide Concentrator; MMIC Amplifiers for 90 to 130 GHz; Robot Would Climb Steep Terrain; Measuring Dynamic Transfer Functions of Cavitating Pumps; Advanced Resistive Exercise Device; Rapid Engineering of Three-Dimensional, Multicellular Tissues With Polymeric Scaffolds; Resonant Tunneling Spin Pump; Enhancing Spin Filters by Use of Bulk Inversion Asymmetry; Optical Magnetometer Incorporating Photonic Crystals; WGM-Resonator/Tapered-Waveguide White-Light Sensor Optics; Raman-Suppressing Coupling for Optical Parametric Oscillator; CO2-Reduction Primary Cell for Use on Venus; Cold Atom Source Containing Multiple Magneto- Optical Traps; POD Model Reconstruction for Gray-Box Fault Detection; System for Estimating Horizontal Velocity During Descent; Software Framework for Peer Data-Management Services; Autogen Version 2.0; Tracking-Data-Conversion Tool; NASA Enterprise Visual Analysis; Advanced Reference Counting Pointers for Better Performance; C Namelist Facility; and Efficient Mosaicking of Spitzer Space Telescope Images

ANALYSIS OF LASER POWER CONVERTERS IN LASER BASED POWER SUPPLIES

Napajanje elektronskih naprav v ekstremnih in industrijskih okoljih pogosto zahteva uporabo visoko zanesljivih električnih napajalnikov, imunih na raznovrstne okolijske in elektromagnete motenje. Zahtevane specifikacije takšnih napajalnikov je mogoče doseči z uporabo sistemov, ki za izvor energije uporabljajo svetlobo laserskih virov. Energija v obliki monokromatske svetlobe je na oddaljeno mesto vodena skozi električno neprevodni medij, s čimer je dosežena inherentna neobčutljivost takšnih napajalnih sistemov na vse vrste elektromagnetih motenj. Lasersko svetlobo vodimo bodisi brezkontaktno po zraku ali priporočljivejše po električno neprevodnem optičnem vlaknu. V slednjem govorimo o sistemih za prenos »moči po optičnem vlaknu« (ang. Power–over–Fiber systems, PoF). Monokromatsko svetlobo je za napajanje elektronskih naprav potrebno pretvoriti v enosmerno električno energijo, kar storimo s fotonapetostnimi pretvorniki optimiziranimi za pretvorbo monokromatske svetlobe laserskih virov – »pretvorniki laserske moči« (ang. Laser Power Converter, LPC). PoF sistem je zaključen s priključitvijo podpornega elektronskega vezja na izhod pretvornika laserske moči, ki poskrbi za prilagoditev napetostnega nivoja za zanesljivo napajanje elektronskih naprav. PoF sistemi napajanja elektronskih naprav so našli svoje mesto v ekstremnih in industrijskih okoljih zaradi lastnosti kot so: • imunost na elektromagnetne motnje (enosmerna in izmenična električna in magnetna polja, razelektritve ozračja, radiofrekvenčne motnje, …), • velika prebojna trdnost med izvorom energije in napajano napravo, • majhna teža vodnikov energije (optična vlakna), • pri poškodbi vodnikov energije ne prihaja do iskrenja, … Zaradi omenjenih lastnosti so bili PoF sistemi razviti in uporabljeni za napajanje: • senzorjev za merjenje parametrov visokonapetostnih daljnovodov, • elektronskih merilnikov pod vodno gladino, • elektronskih podsklopov naprav za magnetno resonanco, • brezpilotnih letal, • elektronskih implantatov v človeškem telesu, • kontrolnih podsistemov v satelitih, • nadzornih video kamer, • merilnikov obratovalnih parametrov vetrnih turbin, … Kljub uspešni implementaciji PoF sistemov v nekaterih nišnih aplikacijah, je prenos energije z lasersko svetlobo še vedno razmeroma neznana tehnološka rešitev. Razlogov za to je veliko, verjetno pa je eden glavnih nizek izkoristek takšnega prenosa energije, ki se v praksi na sistemski ravni giblje nekje med 10 % in 30 %. Največ vložene energije se izgubi pri pretvorbi elektrike v svetlobo, pri čemer sodobne laserske diode dosegajo izkoristke med 40 % in 70 % ter nadalje pri pretvorbi laserske svetlobe nazaj v elektriko, pri čemer najboljši pretvorniki laserske moči dosegajo učinkovitost pretvorbe med 40 % in 60 %. V večini praktičnih aplikacij izgube pri prvotni pretvorbi energije iz elektrike v svetlobo s sistemskega vidika niso problematične, saj je laser postavljen na mestu, kjer je zagotovljena oskrba s potrebno električno energijo. Večje omejitve predstavljajo približno polovične izgube energije pri pretvorbi laserske svetlobe v električno energijo, preostanek energije pa je še dodatno zmanjšan za 10 % do 20 % zaradi izgub na podporni elektroniki. Tako v praksi izgube na sprejemni strani omejujejo največjo električno moč, ki jo lahko napajani napravi zanesljivo zagotovi en pretvornik laserske moči, na približno 1 W. Takšna omejitev največje dovedene moči ne predstavlja večjih problemov za napajanje nizkoenergijskih senzorjev, vendar omejuje doseg splošne uporabnosti PoF sistemov. V želji po razširitvi uporabnosti PoF sistemov se pričajoča doktorska naloga osredotoča na odkrivanje glavnih izgubnih mehanizmov v pretvornikih laserske moči in podporne elektronike. Rezultati sistematične analize in kvantitativnega ovrednotenja izgub so pripeljali do konceptualnih predlogov za izboljšanje sedanjih pretvornikov laserske moči.Electronic devices in extreme and industrial environments often require specialized power supplies immune to a variety of environmental and electromagnetic interferences. Such requirements can be met with power supplies that use lasers as an energy source. The laser light can be transmitted to a powered electronic device either wirelessly through the air or preferably through electrically nonconductive optical fiber. In the latter case, such power supplies are commonly known as Power–over–Fiber (PoF) systems. Energy in the form of monochromatic light must be transformed into electrical energy to power electronic devices. This energy transformation is achieved with photovoltaic (PV) devices optimized for conversion of monochromatic laser light called Laser Power Converters (LPC). Theoretically possible light-to-electricity conversion efficiency of LPCs is impaired by a variety of optical and electrical losses and light energy that is not converted into electrical energy results in energy loss, which in return reduces PoF systems efficiency. For high system efficiencies, LPCs must be made out of an appropriately selected high-quality III-V semiconductors and currently, the best manufactured LPCs exceed 60% conversion efficiency at strictly controlled laboratory conditions. Even thou such a figure is unheard of for the solar cells, an optimized PV converter illuminated with monochromatic light can theoretically convert more than 75% of impinged light to electricity, under the same conditions as the stated manufactured LPC. In this thesis, the reason for such a discrepancy between theoretical and practical conversion efficiency is studied in details and further, novel supporting electronics for LPCs in PoF systems are devised and analyzed in order to increase the system efficiency

Electro-optic architecture (EOA) for sensors and actuators in aircraft propulsion systems

Results of a study to design an optimal architecture for electro-optical sensing and control in advanced aircraft and space systems are described. The propulsion full authority digital Electronic Engine Control (EEC) was the focus for the study. The recommended architecture is an on-engine EEC which contains electro-optic interface circuits for fiber-optic sensors on the engine. Size and weight are reduced by multiplexing arrays of functionally similar sensors on a pair of optical fibers to common electro-optical interfaces. The architecture contains common, multiplex interfaces to seven sensor groups: (1) self luminous sensors; (2) high temperatures; (3) low temperatures; (4) speeds and flows; (5) vibration; (6) pressures; and (7) mechanical positions. Nine distinct fiber-optic sensor types were found to provide these sensing functions: (1) continuous wave (CW) intensity modulators; (2) time division multiplexing (TDM) digital optic codeplates; (3) time division multiplexing (TDM) analog self-referenced sensors; (4) wavelength division multiplexing (WDM) digital optic code plates; (5) wavelength division multiplexing (WDM) analog self-referenced intensity modulators; (6) analog optical spectral shifters; (7) self-luminous bodies; (8) coherent optical interferometers; and (9) remote electrical sensors. The report includes the results of a trade study including engine sensor requirements, environment, the basic sensor types, and relevant evaluation criteria. These figures of merit for the candidate interface types were calculated from the data supplied by leading manufacturers of fiber-optic sensors

NASA SBIR abstracts of 1990 phase 1 projects

The research objectives of the 280 projects placed under contract in the National Aeronautics and Space Administration (NASA) 1990 Small Business Innovation Research (SBIR) Phase 1 program are described. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses in response to NASA's 1990 SBIR Phase 1 Program Solicitation. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 280, in order of its appearance in the body of the report. The document also includes Appendixes to provide additional information about the SBIR program and permit cross-reference in the 1990 Phase 1 projects by company name, location by state, principal investigator, NASA field center responsible for management of each project, and NASA contract number

The NASA SBIR product catalog

The purpose of this catalog is to assist small business firms in making the community aware of products emerging from their efforts in the Small Business Innovation Research (SBIR) program. It contains descriptions of some products that have advanced into Phase 3 and others that are identified as prospective products. Both lists of products in this catalog are based on information supplied by NASA SBIR contractors in responding to an invitation to be represented in this document. Generally, all products suggested by the small firms were included in order to meet the goals of information exchange for SBIR results. Of the 444 SBIR contractors NASA queried, 137 provided information on 219 products. The catalog presents the product information in the technology areas listed in the table of contents. Within each area, the products are listed in alphabetical order by product name and are given identifying numbers. Also included is an alphabetical listing of the companies that have products described. This listing cross-references the product list and provides information on the business activity of each firm. In addition, there are three indexes: one a list of firms by states, one that lists the products according to NASA Centers that managed the SBIR projects, and one that lists the products by the relevant Technical Topics utilized in NASA's annual program solicitation under which each SBIR project was selected