294 research outputs found
An Enhanced Feedback-Base Downlink Packet Scheduling Algorithm for Mobile TV in WIMAX Networks
With high speed access network technology like WIMAX, there is the need for efficient management of radio resources where the throughput and Qos requirements for Multicasting Broadcasting Services (MBS) for example TV are to be met. An enhanced feedback-base downlink Packet scheduling algorithm that can be used in IEEE 802.16d/e networks for mobile TV “one way traffic”(MBS) is needed to support many users utilizing multiuser diversity of the broadband of WIMAX systems where a group of users(good/worst channels) share allocated resources (bandwidth). This paper proposes a WIMAX framework feedback-base (like a channel-awareness) downlink packet scheduling algorithm for Mobile TV traffics in IEEE806.16, in which network Physical Timing Slots (PSs) resource blocks are allocated in a dynamic way to mobile TV subscribers based on the Channel State information (CSI) feedback, and then considering users with worst channels with the aim of improving system throughput while system coverage is being guaranteed. The algorithm was examined by changing the PSs bandwidth allocation of the users and different number of users of a cell. Simulation results show our proposed algorithm performed better than other algorithms (blind algorithms) in terms of improvement in system throughput performance. Doi: 10.12777/ijse.5.1.55-62 [How to cite this article: Oyewale, J. and , Juan, L.X.. (2013). An Enhanced Feedback-Base Downlink Packet Scheduling Algorithm for Mobile TV in WIMAX Networks. International Journal of Science and Engineering, 5(1),55-62. Doi: 10.12777/ijse.5.1.55-62
Systematic Network Coding with the Aid of a Full-Duplex Relay
A characterization of systematic network coding over multi-hop wireless
networks is key towards understanding the trade-off between complexity and
delay performance of networks that preserve the systematic structure. This
paper studies the case of a relay channel, where the source's objective is to
deliver a given number of data packets to a receiver with the aid of a relay.
The source broadcasts to both the receiver and the relay using one frequency,
while the relay uses another frequency for transmissions to the receiver,
allowing for a full-duplex operation of the relay. We analyze the decoding
complexity and delay performance of two types of relays: one that preserves the
systematic structure of the code from the source; another that does not. A
systematic relay forwards uncoded packets upon reception, but transmits coded
packets to the receiver after receiving the first coded packet from the source.
On the other hand, a non-systematic relay always transmits linear combinations
of previously received packets. We compare the performance of these two
alternatives by analytically characterizing the expected transmission
completion time as well as the number of uncoded packets forwarded by the
relay. Our numerical results show that, for a poor channel between the source
and the receiver, preserving the systematic structure at the relay (i) allows a
significant increase in the number of uncoded packets received by the receiver,
thus reducing the decoding complexity, and (ii) preserves close to optimal
delay performance.Comment: 6 pages, 5 figures, submitted to IEEE Globeco
Recommended from our members
Interoperability of wireless communication technologies in hybrid networks: Evaluation of end-to-end interoperability issues and quality of service requirements
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues.
The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies).
The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks.
Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications.
The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way.
The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools.
This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks.
Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research.
It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites.
The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation
Subcarrier and Power Allocation in WiMAX
Worldwide Interoperability for Microwave Access (WiMAX) is one of the latest technologies for providing Broadband Wireless Access (BWA) in a metropolitan area. The use of orthogonal frequency division multiplexing (OFDM) transmissions has been proposed in WiMAX to mitigate the complications which are associated with frequency selective channels. In addition, the multiple access is achieved by using orthogonal frequency division multiple access (OFDMA) scheme which has several advantages such as flexible resource allocation, relatively simple transceivers, and high spectrum efficient. In OFDMA the controllable resources are the subcarriers and the allocated power per subband. Moreover, adaptive subcarrier and power allocation techniques have been selected to exploit the natural multiuser diversity. This leads to an improvement of the performance by assigning the proper subcarriers to the user according to their channel quality and the power is allocated based on water-filling algorithm. One simple method is to allocate subcarriers and powers equally likely between all users. It is well known that this method reduces the spectral efficiency of the system, hence, it is not preferred unless in some applications.
In order to handle the spectral efficiency problem, in this thesis we discuss three novel resources allocation algorithms for the downlink of a multiuser OFDM system and analyze the algorithm performances based on capacity and fairness measurement. Our intensive simulations validate the algorithm performances.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format
Bandwidth and Power Management in Broadband Wireless Networks
Bandwidth and power are considered as two important resources in wireless networks. Therefore, how to management these resources becomes a critical issue. In this thesis, we investigate this issue majorally in IEEE 802.16 networks. We first perform performance analysis on two bandwidth request mechanisms defined in IEEE 802.16 networks. We also propose two practical performance objectives. Based on the analysis, we design two scheduling algorithm to achieve the objectives.
Due to the characteristics of popular variable bit rate (VBR) traffic, it is very difficult for subscriber stations (SSs) to make appropriate bandwidth reservation. Therefore, the bandwidth may not be utilized all the time. We propose a new protocol, named bandwidth recycling, to utilized unused bandwidth. Our simulation shows that the proposed scheme can improve system utilization averagely by 40\%.
We also propose a more aggressive solution to reduce the gap between bandwidth reservation and real usage. We first design a centralized approach by linear programming to obtain the optimal solution. Further, we design a fully distributed scheme based on game theory, named bandwidth reservation (BR) game. Due to different quality of service (QoS) requirements, we customize the utility function for each scheduling class. Our numerical and simulation show that the gap between BR game and optimal solution is limited.
Due to the advantage of dynamical fractional frequency reuse (DFFR), the base station (BS) can dynamically adjust transmission power on each frequency partition. We emphasis on power allocation issue in DFFR to achieve most ecomicical data transmission. We first formulate the problem by integer linear programming (ILP). Due to high computation complexity, we further design a greedy algorithm. Our simulation shows that the results of the greedy algorithm is very close to the ILP results
Evolving military broadband wireless communication systems: WiMAX, LTE and WLAN
© 2016 IEEE. This version of the paper has been accepted for publication. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The final published paper is available online at: https://doi.org/10.1109/ICMCIS.2016.7496570.[Abstract]: Emerging technologies for mobile broadband wireless are being considered as a Commercial Off-The-Shelf solution to cover the operational requirements of the future warfare. The capabilities of these technologies are being enhanced to meet the growing market demands on performance. In this context, several standards such as WiMAX, LTE or WLAN are introducing themselves as strong candidates to fulfill these requirements. This paper presents an innovative scenario-based approach to develop a Military Broadband Wireless Communication System (MBWCS). Its main objective is to analyze how similar a military MBWCS can be to the identified civil standards, taking operational and high level technical requirements into account. This specification will be used for analyzing the applicability and the modifications of each of the standards layers individually. Proving the feasibility and aptitude of each standard provides strong foundations to address a MBWCS in the most efficient way.This work has been funded by MINECO of Spain under grant TEC2013-47141-C4-1-R and Indra Sistemas S.A. The authors acknowledge to Colin Brown, Mehmet Hayri K üçüktabak and Matthias Tschauner their collaboration in the NATO IST-ET-068
A Novel Approach for Implementing Worldwide Interoperability for Microwave Access for Video Surveillance
Video surveillance applications have experienced an increase in demand over the last decade. Surveillance
systems can easily be found in places such as commercial offices, banks and traffic intersections, parks and
recreational areas. Surveillance applications have the potential to be implemented on a WiMAX (Worldwide
Interoperability for Microwave Access) network. Moreover, WiMAX devices have been used widely in the
market and WiMAX-based video surveillance products have also been available. As a radio technology,
WiMAX is a wireless broadband system that offers greater capacity than WiFi networks and wider coverage
than cellular networks.
The acceptance of WiMAX in the market, the availability of WiMAX products and its technology excellence,
contribute to the possibility of implementing it for surveillance application. However, since WiMAX is designed
to accommodate various applications with different quality of service (QoS) requirements, dedicated surveillance
network implementation of WiMAX may not achieve optimum performance, as all Subscriber Stations (SSs)
generate the same QoS requirements.
In the medium access (MAC) layer, this thesis proposes a bandwidth allocation scheme that considers the QoS
uniformity of the traffic sources. The proposed bandwidth allocation scheme comprises a simplified bandwidth
allocation architecture, a packet-aware bandwidth request mechanism and packet-aware scheduling algorithms.
The simplified architecture maximizes resources in the Base Station (BS), deactivates unnecessary services and
minimizes the processing delay. The proposed bandwidth request mechanism reduces bandwidth grant and
transmission delays. The proposed scheduling algorithms prioritize bandwidth granting access to a request that
contains important packet(s). The proposed methods in the MAC layer are designed to be applied to existing
devices in the market, without the necessity to change hardware.
The transport protocol should be able to deliver video with sufficient quality while maintaining low delay
connectivity. The proposed transport layer protocol is therefore designed to improve the existing user datagram
protocol (UDP) performance by retransmitting packet loss selectively to increase the received video quality, and
utilizing MAC support to achieve low delay connectivity.
In order to overcome the limitations of the lower layers, this thesis employs a rateless code instead of transport
layer redundancy in the application layer. Moreover, this thesis proposes post-decoding error concealment
techniques as the last means to overcome packet loss.
To evaluate the performances of the proposed methods, simulations are carried out using NS-2 simulator on
Linux platform. The proposed methods are compared to existing works to measure their effectiveness. To
facilitate the implementation of the transport layer protocols in practical scenarios, UDP packet modification is
applied for each transport layer protocol.Indonesian Directorate General of Higher Education (DGHE/DIKTI
- …