739 research outputs found

    Low-Cost, Portable, Multi-Wall Virtual Reality

    Get PDF
    Virtual reality systems make compelling outreach displays, but some such systems, like the CAVE, have design features that make their use for that purpose inconvenient. In the case of the CAVE, the equipment is difficult to disassemble, transport, and reassemble, and typically CAVEs can only be afforded by large-budget research facilities. We implemented a system like the CAVE that costs less than $30,000, weighs about 500 pounds, and fits into a fifteen-passenger van. A team of six people have unpacked, assembled, and calibrated the system in less than two hours. This cost reduction versus similar virtual-reality systems stems from the unique approach we took to stereoscopic projection. We used an assembly of optical chopper wheels and commodity LCD projectors to create true active stereo at less than a fifth of the cost of comparable active-stereo technologies. The screen and frame design also optimized portability; the frame assembles in minutes with only two fasteners, and both it and the screen pack into small bundles for easy and secure shipment

    Construction of a Three-sided Immersive Telecollaboration System

    Get PDF
    In this article the setup and working principle of a new telecollaboration system “blue-c” is described. This system is an attempt to meet the rising expectations from industry of an IT-supported telecollaboration system. One basic requirement is that a three-dimensional representation of objects be possible together with threedimensional representations of the remote users. Since gesture and mimicry represent an important information channel during a discussion, a realistic 3D video representation is used instead of simple animated avatars. A simultaneous projection and image acquisition of the user in a telecollaboration system is necessary to allow simultaneous work of all team members. Thus, in the introduced system, problems had to be overcome such as providing, simultaneously, illumination for the image acquisition by the cameras and darkness for a bright projection to be seen by the user. A new approach was taken to integrate the cameras into the system by placing them behind active projection walls, which can be switched from transparent to opaque electrically. Unlike other systems, the cameras are therefore not visible to the user, who thus behaves more naturally. In addition, since the cameras are placed outside of the projection room, there is more space to move inside the immersive environment. The article describes the technology and functionality of the system, as well as the gathered experiences.ISSN:1054-7460ISSN:1531-326

    The matrix revisited: A critical assessment of virtual reality technologies for modeling, simulation, and training

    Get PDF
    A convergence of affordable hardware, current events, and decades of research have advanced virtual reality (VR) from the research lab into the commercial marketplace. Since its inception in the 1960s, and over the next three decades, the technology was portrayed as a rarely used, high-end novelty for special applications. Despite the high cost, applications have expanded into defense, education, manufacturing, and medicine. The promise of VR for entertainment arose in the early 1990\u27s and by 2016 several consumer VR platforms were released. With VR now accessible in the home and the isolationist lifestyle adopted due to the COVID-19 global pandemic, VR is now viewed as a potential tool to enhance remote education. Drawing upon over 17 years of experience across numerous VR applications, this dissertation examines the optimal use of VR technologies in the areas of visualization, simulation, training, education, art, and entertainment. It will be demonstrated that VR is well suited for education and training applications, with modest advantages in simulation. Using this context, the case is made that VR can play a pivotal role in the future of education and training in a globally connected world

    SMART-IÂČ: Spatial Multi-users Audio-visual Real Time Interactive Interface, a broadcast application context

    No full text
    International audienceSMART-I2 is a high quality 3D audio-visual interactive rendering system. In SMART-I2, the screen is also used as a multichannel loudspeaker. The spatial audio rendering is based on Wave Field Synthesis, an approach that creates a coherent spatial perception of sound over a large listening area. The azimuth localization accuracy of the system has been verifed by a perceptual experiment. Contrary to conventional systems, SMART-I2 is able to realize a high degree of 3D audio-visual integration with almost no compromise on either the audio or the graphics rendering quality. Such a system can provide benefits to a wide range of applications. Index Terms-- Audio-visual integratio

    Spatial cognition in virtual environments

    Get PDF
    Since the last decades of the past century, Virtual Reality (VR) has been developed also as a methodology in research, besides a set of helpful applications in medical field (trainings for surgeons, but also rehabilitation tools). In science, there is still no agreement if the use of this technology in research on cognitive processes allows us to generalize results found in a Virtual Environment (VE) to the human behavior or cognition in the real world. This happens because of a series of differences found in basic perceptual processes (for example, depth perception) suggest a big difference in visual environmental representation capabilities of Virtual scenarios. On the other side, in literature quite a lot of studies can be found, which give a proof of VEs reliability in more than one field (trainings and rehabilitation, but also in some research paradigms). The main aim of this thesis is to investigate if, and in which cases, these two different views can be integrated and shed a new light and insights on the use of VR in research. Through the many experiments conducted in the "Virtual Development and Training Center" of the Fraunhofer Institute in Magdeburg, we addressed both low-level spatial processes (within an "evaluation of distances paradigm") and high-level spatial cognition (using a navigation and visuospatial planning task, called "3D Maps"), trying to address, at the same time, also practical problems as, for example, the use of stereoscopy in VEs or the problem of "Simulator Sickness" during navigation in immersive VEs. The results obtained with our research fill some gaps in literature about spatial cognition in VR and allow us to suggest that the use of VEs in research is quite reliable, mainly if the investigated processes are from the higher level of complexity. In this case, in fact, human brain "adapts" pretty well even to a "new" reality like the one offered by the VR, providing of course a familiarization period and the possibility to interact with the environment; the behavior will then be “like if” the environment was real: what is strongly lacking, at the moment, is the possibility to give a completely multisensorial experience, which is a very important issue in order to get the best from this kind of “visualization” of an artificial world. From a low-level point of view, we can confirm what already found in literature, that there are some basic differences in how our visual system perceives important spatial cues as depth and relationships between objects, and, therefore, we cannot talk about "similar environments" talking about VR and reality. The idea that VR is a "different" reality, offering potentially unlimited possibilities of use, even overcoming some physical limits of the real world, in which this "new" reality can be acquired by our cognitive system just by interacting with it, is therefore discussed in the conclusions of this work

    Web-based Stereoscopic Collaboration for Medical Visualization

    Get PDF
    Medizinische Volumenvisualisierung ist ein wertvolles Werkzeug zur Betrachtung von Volumen- daten in der medizinischen Praxis und Lehre. Eine interaktive, stereoskopische und kollaborative Darstellung in Echtzeit ist notwendig, um die Daten vollständig und im Detail verstehen zu können. Solche Visualisierung von hochauflösenden Daten ist jedoch wegen hoher Hardware- Anforderungen fast nur an speziellen Visualisierungssystemen möglich. Remote-Visualisierung wird verwendet, um solche Visualisierung peripher nutzen zu können. Dies benötigt jedoch fast immer komplexe Software-Deployments, wodurch eine universelle ad-hoc Nutzbarkeit erschwert wird. Aus diesem Sachverhalt ergibt sich folgende Hypothese: Ein hoch performantes Remote- Visualisierungssystem, welches für Stereoskopie und einfache Benutzbarkeit spezialisiert ist, kann für interaktive, stereoskopische und kollaborative medizinische Volumenvisualisierung genutzt werden. Die neueste Literatur über Remote-Visualisierung beschreibt Anwendungen, welche nur reine Webbrowser benötigen. Allerdings wird bei diesen kein besonderer Schwerpunkt auf die perfor- mante Nutzbarkeit von jedem Teilnehmer gesetzt, noch die notwendige Funktion bereitgestellt, um mehrere stereoskopische Präsentationssysteme zu bedienen. Durch die Bekanntheit von Web- browsern, deren einfach Nutzbarkeit und weite Verbreitung hat sich folgende spezifische Frage ergeben: Können wir ein System entwickeln, welches alle Aspekte unterstützt, aber nur einen reinen Webbrowser ohne zusätzliche Software als Client benötigt? Ein Proof of Concept wurde durchgeführt um die Hypothese zu verifizieren. Dazu gehörte eine Prototyp-Entwicklung, deren praktische Anwendung, deren Performanzmessung und -vergleich. Der resultierende Prototyp (CoWebViz) ist eines der ersten Webbrowser basierten Systeme, welches flüssige und interaktive Remote-Visualisierung in Realzeit und ohne zusätzliche Soft- ware ermöglicht. Tests und Vergleiche zeigen, dass der Ansatz eine bessere Performanz hat als andere ähnliche getestete Systeme. Die simultane Nutzung verschiedener stereoskopischer Präsen- tationssysteme mit so einem einfachen Remote-Visualisierungssystem ist zur Zeit einzigartig. Die Nutzung für die normalerweise sehr ressourcen-intensive stereoskopische und kollaborative Anatomieausbildung, gemeinsam mit interkontinentalen Teilnehmern, zeigt die Machbarkeit und den vereinfachenden Charakter des Ansatzes. Die Machbarkeit des Ansatzes wurde auch durch die erfolgreiche Nutzung für andere Anwendungsfälle gezeigt, wie z.B. im Grid-computing und in der Chirurgie

    Assessment of VR Technology and its Applications to Engineering Problems

    Get PDF
    Virtual reality applications are making valuable contributions to the field of product realization. This paper presents an assessment of the hardware and software capabilities of VR technology needed to support a meaningful integration of VR applications in the product life cycle analysis. Several examples of VR applications for the various stages of the product life cycle engineering are presented as case studies. These case studies describe research results, fielded systems, technical issues, and implementation issues in the areas of virtual design, virtual manufacturing, virtual assembly, engineering analysis, visualization of analysis results, and collaborative virtual environments. Current issues and problems related to the creation, use, and implementation of virtual environments for engineering design, analysis, and manufacturing are also discussed

    Photogrammetry and remote sensing for visualization of spatial data in a virtual reality environment

    Get PDF
    Researchers in many disciplines have started using the tool of Virtual Reality (VR) to gain new insights into problems in their respective disciplines. Recent advances in computer graphics, software and hardware technologies have created many opportunities for VR systems, advanced scientific and engineering applications being among them. In Geometronics, generally photogrammetry and remote sensing are used for management of spatial data inventory. VR technology can be suitably used for management of spatial data inventory. This research demonstrates usefulness of VR technology for inventory management by taking the roadside features as a case study. Management of roadside feature inventory involves positioning and visualization of the features. This research has developed a methodology to demonstrate how photogrammetric principles can be used to position the features using the video-logging images and GPS camera positioning and how image analysis can help produce appropriate texture for building the VR, which then can be visualized in a Cave Augmented Virtual Environment (CAVE).;VR modeling was implemented in two stages to demonstrate the different approaches for modeling the VR scene. A simulated highway scene was implemented with the brute force approach, while modeling software was used to model the real world scene using feature positions produced in this research. The first approach demonstrates an implementation of the scene by writing C++ codes to include a multi-level wand menu for interaction with the scene that enables the user to interact with the scene. The interactions include editing the features inside the CAVE display, navigating inside the scene, and performing limited geographic analysis. The second approach demonstrates creation of a VR scene for a real roadway environment using feature positions determined in this research. The scene looks realistic with textures from the real site mapped on to the geometry of the scene. Remote sensing and digital image processing techniques were used for texturing the roadway features in this scene

    Spatial cognition in virtual environments

    Get PDF
    Since the last decades of the past century, Virtual Reality (VR) has been developed also as a methodology in research, besides a set of helpful applications in medical field (trainings for surgeons, but also rehabilitation tools). In science, there is still no agreement if the use of this technology in research on cognitive processes allows us to generalize results found in a Virtual Environment (VE) to the human behavior or cognition in the real world. This happens because of a series of differences found in basic perceptual processes (for example, depth perception) suggest a big difference in visual environmental representation capabilities of Virtual scenarios. On the other side, in literature quite a lot of studies can be found, which give a proof of VEs reliability in more than one field (trainings and rehabilitation, but also in some research paradigms). The main aim of this thesis is to investigate if, and in which cases, these two different views can be integrated and shed a new light and insights on the use of VR in research. Through the many experiments conducted in the "Virtual Development and Training Center" of the Fraunhofer Institute in Magdeburg, we addressed both low-level spatial processes (within an "evaluation of distances paradigm") and high-level spatial cognition (using a navigation and visuospatial planning task, called "3D Maps"), trying to address, at the same time, also practical problems as, for example, the use of stereoscopy in VEs or the problem of "Simulator Sickness" during navigation in immersive VEs. The results obtained with our research fill some gaps in literature about spatial cognition in VR and allow us to suggest that the use of VEs in research is quite reliable, mainly if the investigated processes are from the higher level of complexity. In this case, in fact, human brain "adapts" pretty well even to a "new" reality like the one offered by the VR, providing of course a familiarization period and the possibility to interact with the environment; the behavior will then be “like if” the environment was real: what is strongly lacking, at the moment, is the possibility to give a completely multisensorial experience, which is a very important issue in order to get the best from this kind of “visualization” of an artificial world. From a low-level point of view, we can confirm what already found in literature, that there are some basic differences in how our visual system perceives important spatial cues as depth and relationships between objects, and, therefore, we cannot talk about "similar environments" talking about VR and reality. The idea that VR is a "different" reality, offering potentially unlimited possibilities of use, even overcoming some physical limits of the real world, in which this "new" reality can be acquired by our cognitive system just by interacting with it, is therefore discussed in the conclusions of this work
    • 

    corecore