In-operation planning in flexgrid optical core networks

New generation applications, such as cloud computing or video distribution, can run in a telecom cloud infrastructure where the datacenters (DCs) of telecom operators are integrated in their networks thus, increasing connections' dynamicity and resulting in time-varying traffic capacities, which might also entail changes in the traffic direction along the day. As a result, a flexible optical technology able to dynamically set-up variable-capacity connections, such as flexgrid, is needed. Nonetheless, network dynamicity might entail network performance degradation thus, requiring re-optimizing the network while it is in operation. This thesis is devoted to devise new algorithms to solve in-operation network planning problems aiming at enhancing the performance of optical networks and at studying their feasibility in experimental environments. In-operation network planning requires from an architecture enabling the deployment of algorithms that must be solved in stringent times. That architecture can be based on a Path Computation Element (PCE) or a Software Defined Networks controller. In this thesis, we assume the former split in a front-end PCE, in charge of provisioning paths and handling network events, and a specialized planning tool in the form of a back-end PCE responsible for solving in-operation planning problems. After the architecture to support in-operation planning is assessed, we focus on studying the following applications: 1) Spectrum fragmentation is one of the most important problems in optical networks. To alleviate it to some extent without traffic disruption, we propose a hitless spectrum defragmentation strategy. 2) Each connection affected by a failure can be recovered using multiple paths to increase traffic restorability at the cost of poor resource utilization. We propose re-optimizing the network after repairing the failure to aggregate and reroute those connections to release spectral resources. 3) We study two approaches to provide multicast services: establishing a point-to-multipoint connections at the optical layer and using multi-purpose virtual network topologies (VNT) to serve both unicast and multicast connectivity requests. 4) The telecom cloud infrastructure, enables placing contents closer to the users. Based on it, we propose a hierarchical content distribution architecture where VNTs permanently interconnect core DCs and metro DCs periodically synchronize contents to the core DCs. 5) When the capacity of the optical backbone network becomes exhausted, we propose using a planning tool with access to inventory and operation databases to periodically decide the equipment and connectivity to be installed at the minimum cost reducing capacity overprovisioning. 6) In multi-domain multi-operator scenarios, a broker on top of the optical domains can provision multi-domain connections. We propose performing intra-domain spectrum defragmentation when no contiguous spectrum can be found for a new connection request. 7) Packet nodes belonging to a VNT can collect and send incoming traffic monitoring data to a big data repository. We propose using the collected data to predict next period traffic and to adapt the VNT to future conditions. The methodology followed in this thesis consists in proposing a problem statement and/or a mathematical formulation for the problems identified and then, devising algorithms for solving them. Those algorithms are simulated and then, they are experimentally assessed in real test-beds. This thesis demonstrates the feasibility of performing in-operation planning in optical networks, shows that it enhances the performance of the network and validates the feasibility of its deployment in real networks. It shall be mentioned that part of the work reported in this thesis has been done within the framework of several research projects, namely IDEALIST (FP7-ICT-2011-8) and GEANT (238875) funded by the EC and SYNERGY (TEC2014-59995-R) funded by the MINECO.Les aplicacions de nova generació, com ara el cloud computing o la distribució de vídeo, es poden executar a infraestructures de telecom cloud (TCI) on operadors integren els seus datacenters (DC) a les seves xarxes. Aquestes aplicacions fan que incrementi tant la dinamicitat de les connexions, com la variabilitat de les seves capacitats en el temps, arribant a canviar de direcció al llarg del dia. Llavors, cal disposar de tecnologies òptiques flexibles, tals com flexgrid, que suportin aquesta dinamicitat a les connexions. Aquesta dinamicitat pot degradar el rendiment de la xarxa, obligant a re-optimitzar-la mentre és en operació. Aquesta tesis està dedicada a idear nous algorismes per a resoldre problemes de planificació sobre xarxes en operació (in-operation network planning) per millorar el rendiment de les xarxes òptiques i a estudiar la seva factibilitat en entorns experimentals. Aquests problemes requereixen d’una arquitectura que permeti desplegar algorismes que donin solucions en temps restrictius. L’arquitectura pot estar basada en un Element de Computació de Rutes (PCE) o en un controlador de Xarxes Definides per Software. En aquesta tesis, assumim un PCE principal encarregat d’aprovisionar rutes i gestionar esdeveniments de la xarxa, i una eina de planificació especialitzada en forma de PCE de suport per resoldre problemes d’in-operation planning. Un cop validada l’arquitectura que dona suport a in-operation planning, estudiarem les següents aplicacions: 1) La fragmentació d’espectre és un dels principals problemes a les xarxes òptiques. Proposem reduir-la en certa mesura, fent servir una estratègia que no afecta al tràfic durant la desfragmentació. 2) Cada connexió afectada per una fallada pot ser recuperada fent servir múltiples rutes incrementant la restaurabilitat de la xarxa, tot i empitjorar-ne la utilització de recursos. Proposem re-optimitzar la xarxa després de reparar una fallada per agregar i re-enrutar aquestes connexions tractant d’alliberar recursos espectrals. 3) Estudiem dues solucions per aprovisionar serveis multicast: establir connexions punt-a-multipunt sobre la xarxa òptica i utilitzar Virtual Network Topologies (VNT) multi-propòsit per a servir peticions de connectivitat tant unicast com multicast. 4) La TCI permet mantenir els continguts a prop dels usuaris. Proposem una arquitectura jeràrquica de distribució de continguts basada en la TCI, on els DC principals s’interconnecten per mitjà de VNTs permanents i els DCs metropolitans periòdicament sincronitzen continguts amb els principals. 5) Quan la capacitat de la xarxa òptica s’exhaureix, proposem utilitzar una eina de planificació amb accés a bases de dades d’inventari i operacionals per decidir periòdicament l’equipament i connectivitats a instal·lar al mínim cost i reduir el sobre-aprovisionament de capacitat. 6) En entorns multi-domini multi-operador, un broker per sobre dels dominis òptics pot aprovisionar connexions multi-domini. Proposem aplicar desfragmentació d’espectre intra-domini quan no es pot trobar espectre contigu per a noves peticions de connexió. 7) Els nodes d’una VNT poden recollir i enviar informació de monitorització de tràfic entrant a un repositori de big data. Proposem utilitzar aquesta informació per adaptar la VNT per a futures condicions. La metodologia que hem seguit en aquesta tesis consisteix en formalitzar matemàticament els problemes un cop aquests son identificats i, després, idear algorismes per a resoldre’ls. Aquests algorismes son simulats i finalment validats experimentalment en entorns reals. Aquesta tesis demostra la factibilitat d’implementar mecanismes d’in-operation planning en xarxes òptiques, mostra els beneficis que aquests aporten i valida la seva aplicabilitat en xarxes reals. Part del treball presentat en aquesta tesis ha estat dut a terme en el marc dels projectes de recerca IDEALIST (FP7-ICT-2011-8) i GEANT (238875), finançats per la CE, i SYNERGY (TEC2014-59995-R), finançat per el MINECO.Postprint (published version

Next generation control of transport networks

It is widely understood by telecom operators and industry analysts that bandwidth demand is increasing dramatically, year on year, with typical growth figures of 50% for Internet-based traffic [5]. This trend means that the consumers will have both a wide variety of devices attaching to their networks and a range of high bandwidth service requirements. The corresponding impact is the effect on the traffic engineered network (often referred to as the “transport network”) to ensure that the current rate of growth of network traffic is supported and meets predicted future demands. As traffic demands increase and newer services continuously arise, novel network elements are needed to provide more flexibility, scalability, resilience, and adaptability to today’s transport network. The transport network provides transparent traffic engineered communication of user, application, and device traffic between attached clients (software and hardware) and establishing and maintaining point-to-point or point-to-multipoint connections. The research documented in this thesis was based on three initial research questions posed while performing research at British Telecom research labs and investigating control of transport networks of future transport networks: 1. How can we meet Internet bandwidth growth yet minimise network costs? 2. Which enabling network technologies might be leveraged to control network layers and functions cooperatively, instead of separated network layer and technology control? 3. Is it possible to utilise both centralised and distributed control mechanisms for automation and traffic optimisation? This thesis aims to provide the classification, motivation, invention, and evolution of a next generation control framework for transport networks, and special consideration of delivering broadcast video traffic to UK subscribers. The document outlines pertinent telecoms technology and current art, how requirements I gathered, and research I conducted, and by which the transport control framework functional components are identified and selected, and by which method the architecture was implemented and applied to key research projects requiring next generation control capabilities, both at British Telecom and the wider research community. Finally, in the closing chapters, the thesis outlines the next steps for ongoing research and development of the transport network framework and key areas for further study

Off-line and in-operation optical core networks planning

The ever increasing IP traffic volume has finally brought to light the high inefficiency of current wavelength-routed over rigid-grid optical networks in matching the client layer requirements. Such an issue results in the deployment of large-size, expensive and power-consuming Multiprotocol Label Switching (MPLS) layers to perform the required grooming/aggregation functionality. To deal with this problem, the emerging flexgrid technology, allowing for reduced size frequency grids, is being standardized. Flexgrid optical networks divide the spectrum into frequency slots providing finer granularity than rigid networks based on Dense Wavelength Division Multiplexing (DWDM). To find a feasible allocation, new Routing and Spectrum Allocation (RSA) algorithms for flexgrid optical networks need to be designed and evaluated. Furthermore, due to the flexibility of flexible optical networks, the aggregation functions and statistical multiplexing can be partially located in the optical layer. In addition, given the special characteristics of flexible optical networks, the traditional mechanisms for protection and recovery must be reformulated. Optical transport platforms are designed to facilitate the setting up and tearing down of optical connections (lightpaths). Combining remotely configurable optical cross-connects (OXCs) with a control plane provides the capability of automated lightpath set-up for regular provisioning, and real-time reaction to the failures, being thus able to reduce Operational Expenditures (OPEX). However, to exploit existing capacity, increase dynamicity, and provide automation in future networks, current management architectures, utilizing legacy Network Management Systems (NMS) need to be radically transformed. This thesis is devoted to design optical networks and to devise algorithms to operate them. Network design objective consists of: i. Analyzing the cost implications that a set of frequency slot widths have on the Capital Expenditures (CAPEX) investments required to deploy MPLS-over-flexgrid networks; ii. Studying recovery schemes, where a new recovery scheme specifically designed for flexgrid-based optical networks is proposed. As for network operation, we focus on: i. Studying provisioning, where two provisioning algorithms are proposed: the first one targets at solving the RSA problem in flexgrid networks, whereas the second one studies provisioning considering optical impairments in translucent DWDM networks; ii. Getting back to the recovery problem, we focus on algorithms to cope with restoration in dynamic scenarios. Several algorithms are proposed for both single layer and multilayer networks to be deployed in the centralized Path Computation Element (PCE); iii. One of the main problems in flexgrid networks is spectrum defragmentation. In view of that, we propose an algorithm to reallocate already established optical connections so as to make room for incoming requests. This algorithm is extended with elasticity to deal with time-varying traffic. The above algorithms are firstly implemented and validated by using simulation, and finally experimentally assessed in real test-beds. In view of PCE architectures do not facilitate network reconfiguration, we propose a control and management architecture to allow the network to be dynamically operated; network resources can be made available by reconfiguring and/or re-optimizing the network on demand and in real-time. We call that as in-operation network planning. It shall be mentioned that part of the work reported in this thesis has been done within the framework of several European and National projects, namely STRONGEST (FP7-247674), IDEALIST (FP7-ICT-2011-8), and GEANT (FP7-238875) funded by the European Commission, and ENGINE (TEC2008-02634) and ELASTIC (TEC2011-27310) funded by the Spanish Science Ministry.El volumen creciente del tráfico IP, finalmente, ha puesto de manifiesto la alta ineficiencia de las redes ópticas actuales de grid rígido basadas en WDM en la adecuación a los requisitos de capa de cliente. Dicho problema genera que se deba desplegar una red con capas MPLS de gran tamaño, costosa y de alto consumo energético para poder realizar la funcionalidad de agregación requerida. Para hacer frente a este problema, la tecnología flexgrid emergente, que permite grids con frecuencias de menor tamaño, está siendo estandarizada. Las redes ópticas flexgrid dividen el espectro en slots de frecuencia, lo que proporciona una granularidad más fina en comparación a las redes rígidas basadas en WDM. Para encontrar una asignación factible, nuevos algoritmos de enrutamiento y asignación de espectro (RSA) para redes ópticas flexgrid deben ser diseñados y evaluados. Además, debido a la flexibilidad de las redes ópticas flexibles, las funciones de agregación y de multiplexación estadística pueden ser parcialmente situadas en la capa óptica. Asimismo, dadas las características especiales de las redes ópticas flexibles, los mecanismos tradicionales de protección y recuperación deben reformularse. Las plataformas de transporte ópticas están diseñadas para facilitar la creación y destrucción de conexiones ópticas. La combinación de OXCs configurables remotamente con un plano de control, proporciona la capacidad de crear conexiones automáticamente para el aprovisionamiento habitual, y la reacción en tiempo real a los fallos, para así poder reducir el OPEX. Sin embargo, para aprovechar la capacidad existente, aumentar la dinamicidad y proporcionar automatización a las redes del futuro, las arquitecturas actuales de gestión, que utilizan sistemas legados de NMS, necesitan ser transformadas de manera radical. Esta tesis está dedicada al diseño de redes ópticas y a la creación de algoritmos para operarlas. El objetivo de diseño de red se compone de: 1. El análisis de las implicancias en el costo que tiene un conjunto de slots de frecuencia en el CAPEX necesario para implementar redes MPLS-over-flexgrid; 2. El estudio de esquemas de recuperación, donde se propone un nuevo esquema de recuperación diseñado específicamente para las redes ópticas basadas en flexgrid. En cuanto a la operación de la red: 1. El estudio de aprovisionamiento, donde se proponen dos algoritmos de aprovisionamiento: el primero de ellos tiene como objetivo solucionar el problema de RSA en redes flexgrid, mientras que el segundo estudia aprovisionamiento considerando la degradación óptica en redes WDM translúcidas; 2. Volviendo al problema de la recuperación, nos centramos en algoritmos de restauración para escenarios dinámicos. Se proponen varios algoritmos, tanto para redes mono-capa como multi-capa, que serán desplegados en un PCE centralizado; 3. Uno de los principales problemas en las redes flexgrid es la desfragmentación del espectro. Para ello, se propone un algoritmo para reasignar las conexiones ópticas ya establecidas con el fin de hacer espacio a las entrantes. Este algoritmo se extiende con elasticidad para ser utilizado en escenarios con tráfico variable en el tiempo. Los algoritmos anteriores son primero implementados y validados utilizando simulación, y finalmente son evaluados experimentalmente en testbeds reales. En vista de que las arquitecturas de PCE no facilitan la reconfiguración de la red, proponemos una arquitectura de control y gestión para permitir que la red pueda ser operada de forma dinámica; hacer que los recursos de la red estén disponibles mediante reconfiguración y/o re-optimización de la red bajo demanda y en tiempo real. A eso lo llamamos planificación en operación de la red. El trabajo presentado en esta tesis se ha realizado en el marco de proyectos europeos y nacionales: STRONGEST (FP7-247674), IDEALIST (FP7-2011-8), y GEANT (FP7-238875) financiados por la CE, y ENGINE (TEC2008-02634) y ELASTIC (TEC2011-27310) financiados por el MINEC

Integration of unidirectional technologies into wireless back-haul architecture

This thesis was submitted for the degree of Docter of Philosophy and awarded by Brunel University.Back-haul infrastructures of today's wireless operators must support the triple-play services demanded by the market or regulatory bodies. To cope with increasing capacity demand, the EU FP7 project CARMEN has developed a cost-effective heterogeneous multi-radio wireless back-haul architecture, which may also leverage the native multicast capabilities of broadcast technologies such as DVB-T to off-load high-bandwidth broadcast content delivery. However, the integration of such unidirectional technologies into a packet-switched architecture requires careful considerations. The contribution of this thesis is the investigation, design and evaluation of protocols and mechanisms facilitating the integration of such unidirectional technologies into the wireless back-haul architecture so that they can be configured and utilized by the spectrum and capacity optimization modules. This integration mainly concerns the control plane and, in particular, the aspects related to resource and capability descriptions, neighborhood, link and Multi Protocol Label Switching (MPLS) Label-Switched Path (LSP) monitoring, unicast and multicast LSP signalling as well as topology forming and maintenance. During the course of this study we have analyzed the problem space, proposed solutions to the resulting research questions and evaluated our approach. Our results show that the now Unidirectional Technology (UDT)-aware architecture can readily consider Unidirectional Technologies (UDTs) to distribute, for example, broadcast content

Software Defined Applications in Cellular and Optical Networks

abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

New Challenges in Quality of Services Control Architectures in Next Generation Networks

A mesura que Internet i les xarxes IP s'han anat integrant dins la societat i les corporacions, han anat creixent les expectatives de nous serveis convergents així com les expectatives de qualitat en les comunicacions. Les Next Generation Networks (NGN) donen resposta a les noves necessitats i representen el nou paradigma d'Internet a partir de la convergència IP. Un dels aspectes menys desenvolupats de les NGN és el control de la Qualitat del Servei (QoS), especialment crític en les comunicacions multimèdia a través de xarxes heterogènies i/o de diferents operadors. A més a més, les NGN incorporen nativament el protocol IPv6 que, malgrat les deficiències i esgotament d'adreces IPv4, encara no ha tingut l'impuls definitiu.Aquesta tesi està enfocada des d'un punt de vista pràctic. Així doncs, per tal de poder fer recerca sobre xarxes de proves (o testbeds) que suportin IPv6 amb garanties de funcionament, es fa un estudi en profunditat del protocol IPv6, del seu grau d'implementació i dels tests de conformància i interoperabilitat existents que avaluen la qualitat d'aquestes implementacions. A continuació s'avalua la qualitat de cinc sistemes operatius que suporten IPv6 mitjançant un test de conformància i s'implementa el testbed IPv6 bàsic, a partir del qual es farà la recerca, amb la implementació que ofereix més garanties.El QoS Broker és l'aportació principal d'aquesta tesi: un marc integrat que inclou un sistema automatitzat per gestionar el control de la QoS a través de sistemes multi-domini/multi-operador seguint les recomanacions de les NGN. El sistema automatitza els mecanismes associats a la configuració de la QoS dins d'un mateix domini (sistema autònom) mitjançant la gestió basada en polítiques de QoS i automatitza la negociació dinàmica de QoS entre QoS Brokers de diferents dominis, de forma que permet garantir QoS extrem-extrem sense fissures. Aquesta arquitectura es valida sobre un testbed de proves multi-domini que utilitza el mecanisme DiffServ de QoS i suporta IPv6.L'arquitectura definida en les NGN permet gestionar la QoS tant a nivell 3 (IP) com a nivell 2 (Ethernet, WiFi, etc.) de forma que permet gestionar també xarxes PLC. Aquesta tesi proposa una aproximació teòrica per aplicar aquesta arquitectura de control, mitjançant un QoS Broker, a les noves xarxes PLC que s'estan acabant d'estandarditzar, i discuteix les possibilitats d'aplicació sobre les futures xarxes de comunicació de les Smart Grids.Finalment, s'integra en el QoS Broker un mòdul per gestionar l'enginyeria del tràfic optimitzant els dominis mitjançant tècniques de intel·ligència artificial. La validació en simulacions i sobre un testbed amb routers Cisco demostra que els algorismes genètics híbrids són una opció eficaç en aquest camp.En general, les observacions i avenços assolits en aquesta tesi contribueixen a augmentar la comprensió del funcionament de la QoS en les NGN i a preparar aquests sistemes per afrontar problemes del món real de gran complexitat.A medida que Internet y las redes IP se han ido integrando dentro de la sociedad y las corporaciones, han ido creciendo las expectativas de nuevos servicios convergentes así como las expectativas de calidad en las comunicaciones. Las Next Generation Networks (NGN) dan respuesta a las nuevas necesidades y representan el nuevo paradigma de Internet a partir de la convergencia IP. Uno de los aspectos menos desarrollados de las NGN es el control de la Calidad del Servicio (QoS), especialmente crítico en las comunicaciones multimedia a través de redes heterogéneas y/o de diferentes operadores. Además, las NGN incorporan nativamente el protocolo IPv6 que, a pesar de las deficiencias y agotamiento de direcciones IPv4, aún no ha tenido el impulso definitivo.Esta tesis está enfocada desde un punto de vista práctico. Así pues, con tal de poder hacer investigación sobre redes de prueba (o testbeds) que suporten IPv6 con garantías de funcionamiento, se hace un estudio en profundidad del protocolo IPv6, de su grado de implementación y de los tests de conformancia e interoperabilidad existentes que evalúan la calidad de estas implementaciones. A continuación se evalua la calidad de cinco sistemas operativos que soportan IPv6 mediante un test de conformancia y se implementa el testbed IPv6 básico, a partir del cual se realizará la investigación, con la implementación que ofrece más garantías.El QoS Broker es la aportación principal de esta tesis: un marco integrado que incluye un sistema automatitzado para gestionar el control de la QoS a través de sistemas multi-dominio/multi-operador siguiendo las recomendaciones de las NGN. El sistema automatiza los mecanismos asociados a la configuración de la QoS dentro de un mismo dominio (sistema autónomo) mediante la gestión basada en políticas de QoS y automatiza la negociación dinámica de QoS entre QoS brokers de diferentes dominios, de forma que permite garantizar QoS extremo-extremo sin fisuras. Esta arquitectura se valida sobre un testbed de pruebas multi-dominio que utiliza el mecanismo DiffServ de QoS y soporta IPv6. La arquitectura definida en las NGN permite gestionar la QoS tanto a nivel 3 (IP) o como a nivel 2 (Ethernet, WiFi, etc.) de forma que permite gestionar también redes PLC. Esta tesis propone una aproximación teórica para aplicar esta arquitectura de control, mediante un QoS Broker, a las noves redes PLC que se están acabando de estandardizar, y discute las posibilidades de aplicación sobre las futuras redes de comunicación de las Smart Grids.Finalmente, se integra en el QoS Broker un módulo para gestionar la ingeniería del tráfico optimizando los dominios mediante técnicas de inteligencia artificial. La validación en simulaciones y sobre un testbed con routers Cisco demuestra que los algoritmos genéticos híbridos son una opción eficaz en este campo.En general, las observaciones y avances i avances alcanzados en esta tesis contribuyen a augmentar la comprensión del funcionamiento de la QoS en las NGN y en preparar estos sistemas para afrontar problemas del mundo real de gran complejidad.The steady growth of Internet along with the IP networks and their integration into society and corporations has brought with it increased expectations of new converged services as well as greater demands on quality in communications. The Next Generation Networks (NGNs) respond to these new needs and represent the new Internet paradigm from the IP convergence. One of the least developed aspects in the NGNs is the Quality of Service (QoS) control, which is especially critical in the multimedia communication through heterogeneous networks and/or different operators. Furthermore, the NGNs natively incorporate the IPv6 protocol which, despite its shortcomings and the depletion of IPv4 addresses has not been boosted yet.This thesis has been developed with a practical focus. Therefore, with the aim of carrying out research over testbeds supporting the IPv6 with performance guarantees, an in-depth study of the IPv6 protocol development has been conducted and its degree of implementation and the existing conformance and interoperability tests that evaluate these implementations have been studied. Next, the quality of five implementations has been evaluated through a conformance test and the basic IPv6 testbed has been implemented, from which the research will be carried out. The QoS Broker is the main contribution to this thesis: an integrated framework including an automated system for QoS control management through multi-domain/multi-operator systems according to NGN recommendations. The system automates the mechanisms associated to the QoS configuration inside the same domain (autonomous system) through policy-based management and automates the QoS dynamic negotiation between peer QoS Brokers belonging to different domains, so it allows the guarantee of seamless end-to-end QoS. This architecture is validated over a multi-domain testbed which uses the QoS DiffServ mechanism and supports IPv6.The architecture defined in the NGN allows QoS management at level 3 (IP) as well as at level 2 (e.g. Ethernet, WiFi) so it also facilitates the management of PLC networks. Through the use of a QoS Broker, this thesis proposes a theoretical approach for applying this control architecture to the newly standardized PLC networks, and discusses the possibilities of applying it over the future communication networks of the Smart Grids.Finally, a module for managing traffic engineering which optimizes the network domains through artificial intelligence techniques is integrated in the QoS Broker. The validations by simulations and over a Cisco router testbed demonstrate that hybrid genetic algorithms are an effective option in this area.Overall, the advances and key insights provided in this thesis help advance our understanding of QoS functioning in the NGNs and prepare these systems to face increasingly complex problems, which abound in current industrial and scientific applications

View on 5G Architecture: Version 2.0

The 5G Architecture Working Group as part of the 5GPPP Initiative is looking at capturing novel trends and key technological enablers for the realization of the 5G architecture. It also targets at presenting in a harmonized way the architectural concepts developed in various projects and initiatives (not limited to 5GPPP projects only) so as to provide a consolidated view on the technical directions for the architecture design in the 5G era. The first version of the white paper was released in July 2016, which captured novel trends and key technological enablers for the realization of the 5G architecture vision along with harmonized architectural concepts from 5GPPP Phase 1 projects and initiatives. Capitalizing on the architectural vision and framework set by the first version of the white paper, this Version 2.0 of the white paper presents the latest findings and analyses with a particular focus on the concept evaluations, and accordingly it presents the consolidated overall architecture design

Internet of Things From Hype to Reality

The Internet of Things (IoT) has gained significant mindshare, let alone attention, in academia and the industry especially over the past few years. The reasons behind this interest are the potential capabilities that IoT promises to offer. On the personal level, it paints a picture of a future world where all the things in our ambient environment are connected to the Internet and seamlessly communicate with each other to operate intelligently. The ultimate goal is to enable objects around us to efficiently sense our surroundings, inexpensively communicate, and ultimately create a better environment for us: one where everyday objects act based on what we need and like without explicit instructions