Study of a hybrid OCDMA-WDM segmented ring for metropolitan area networks

Proceeding of: 12th International Conference on High Performance Switching and Routing, Cartagena, Spain, July 4-6, 2011Optical Code Division Multiple Access (OCDMA) techniques have shown outstanding capabilities in the sharing of optical media, in particular in access networks. However, OCDMA systems may suffer from Multiple Access Interference (MAI) and other kinds of noise when many users access the shared media simultaneously, increasing the BER (Binary Error Rate) to unacceptable levels, that is, a situation at which all combined signals interfere and are lost. This work proposes a mixed OCDMA and Tunable Transmitter- Fixed Receiver (TT-FR) WDM and ring architecture at which the ring is split into small-size segments to limit the probability of MAI. Essentially, every segment in the ring has got two hub nodes (on the segment’s head and tail) which forwards inter-segment traffic to other hub nodes on dedicated home wavelengths, thus making use of WDM. The access media inside the segment is shared between the nodes by means of OCDMA, and code reuse is possible on different segments. Our performance analysis shows how to split a given ring into segments in order to minimise the BER due to multiple users accessing the network and allow for high bit-rates for a given traffic load. In addition, we analyse the possibility of introducing Forward Error Correction (FEC) at a moderate overhead cost to improve performance.The work described in this paper was carried out with the support of the BONE project (“Building the Future Optical Network in Europe”), a Network of Excellence funded by the European Commission through the 7th ICT-Framework Programme. Additionally, the authors would like to thank the support of the T2C2 Spanish project (under code TIN2008-06739-C04-01) and the Greencom UC3M-CAM project under code (CCG10-UC3M/TIC-5624).Publicad

Packet Loss Rate Differentiation in slotted Optical Packet Switching OCDM/WDM

We propose a multi-class mechanism for Optical Code Division Multiplexing (OCDM), Wavelength Division Multiplexing (WDM) Optical Packet Switch (OPS) architecture capable of supporting Quality of Service (QoS) transmission. OCDM/WDM has been proposed as a competitive hybrid switching technology to support the next generation optical Internet. This paper addresses performance issues in the slotted OPS networks and proposed four differentiation schemes to support Quality of Service. In addition, we present a comparison between the proposed schemes as well as, a simulation scheduler design which can be suitable for the core switch node in OPS networks. Using software simulations the performance of our algorithm in terms of losing probability, the packet delay, and scalability is evaluated

A Survey on the Path Computation Element (PCE) Architecture

Quality of Service-enabled applications and services rely on Traffic Engineering-based (TE) Label Switched Paths (LSP) established in core networks and controlled by the GMPLS control plane. Path computation process is crucial to achieve the desired TE objective. Its actual effectiveness depends on a number of factors. Mechanisms utilized to update topology and TE information, as well as the latency between path computation and resource reservation, which is typically distributed, may affect path computation efficiency. Moreover, TE visibility is limited in many network scenarios, such as multi-layer, multi-domain and multi-carrier networks, and it may negatively impact resource utilization. The Internet Engineering Task Force (IETF) has promoted the Path Computation Element (PCE) architecture, proposing a dedicated network entity devoted to path computation process. The PCE represents a flexible instrument to overcome visibility and distributed provisioning inefficiencies. Communications between path computation clients (PCC) and PCEs, realized through the PCE Protocol (PCEP), also enable inter-PCE communications offering an attractive way to perform TE-based path computation among cooperating PCEs in multi-layer/domain scenarios, while preserving scalability and confidentiality. This survey presents the state-of-the-art on the PCE architecture for GMPLS-controlled networks carried out by research and standardization community. In this work, packet (i.e., MPLS-TE and MPLS-TP) and wavelength/spectrum (i.e., WSON and SSON) switching capabilities are the considered technological platforms, in which the PCE is shown to achieve a number of evident benefits

Schemes for building an efficient all-optical virtual private network.

by Tam Scott Kin Lun.Thesis submitted in: October 2005.Thesis (M.Phil.)--Chinese University of Hong Kong, 2006.Includes bibliographical references (leaves 58-64).Abstracts in English and Chinese.Chapter 1. --- Introduction --- p.1Chapter 1.1. --- Optical Networks --- p.1Chapter 1.1.1. --- IP over Optical Networks --- p.1Chapter 1.1.2. --- Challenges in Optical Networks --- p.4Chapter 1.2. --- Virtual Private Networks (VPN) --- p.5Chapter 1.2.1. --- CE Based VPN --- p.6Chapter 1.2.2. --- Network Based VPN --- p.7Chapter 1.2.2.1. --- MPLS Layer 2 VPN --- p.8Chapter 1.2.2.2. --- MPLS Layer 3 VPN --- p.9Chapter 1.2.3. --- Optical VPN --- p.9Chapter 1.2.4. --- Challenges in VPN Technologies --- p.11Chapter 1.3. --- Objective of this Thesis --- p.11Chapter 1.4. --- Outline of this Thesis --- p.12Chapter 2. --- Architecture of an All-Optical VPN --- p.13Chapter 2.1. --- Introduction --- p.13Chapter 2.2. --- Networking Vendor Activities --- p.13Chapter 2.3. --- Service Provider Activities --- p.15Chapter 2.4. --- Standard Bodies Activities --- p.16Chapter 2.5. --- Requirements for All-Optical VPN --- p.17Chapter 2.6. --- Reconfigurability of an All-Optical VPN --- p.19Chapter 2.7. --- Switching Methods in All-Optical VPN --- p.20Chapter 2.8. --- Survivability of an All-Optical VPN --- p.23Chapter 3. --- Maximizing the Utilization Of A Survivable Multi-Ring WDM Network --- p.25Chapter 3.1. --- Introduction --- p.25Chapter 3.2. --- Background --- p.25Chapter 3.3. --- Method --- p.26Chapter 3.3.1. --- Effect on packet based services --- p.28Chapter 3.3.2. --- Effect on optical circuit based services --- p.28Chapter 3.4. --- Simulation results --- p.29Chapter 3.5. --- Chapter Summary --- p.36Chapter 4. --- Design of an All-Optical VPN Processing Engine --- p.37Chapter 4.1. --- Introduction --- p.37Chapter 4.2. --- Concepts of Optical Processors --- p.38Chapter 4.3. --- Design Principles of the All-Optical VPN Processing Engine --- p.40Chapter 4.3.1. --- Systolic System --- p.41Chapter 4.3.2. --- Design Considerations of an Optical Processing Cell --- p.42Chapter 4.3.2.1. --- Mach-Zehnder Structures --- p.43Chapter 4.3.2.2. --- Vertical Cavity Semiconductor Optical Amplifier --- p.43Chapter 4.3.2.3. --- The Optical Processing Cell --- p.44Chapter 4.3.3. --- All-Optical VPN Processing Engine --- p.47Chapter 4.4. --- Design Evaluation --- p.49Chapter 4.5. --- Application Example --- p.50Chapter 4.6. --- Chapter Summary --- p.54Chapter 5. --- Conclusion --- p.55Chapter 5.1. --- Summary of the Thesis --- p.55Chapter 5.2. --- Future Works --- p.56Chapter 6. --- References --- p.5

Investigation of performance issues affecting optical circuit and packet switched WDM networks

Optical switching represents the next step in the evolution of optical networks. This thesis describes work that was carried out to examine performance issues which can occur in two distinct varieties of optical switching networks. Slow optical switching in which lightpaths are requested, provisioned and torn down when no longer required is known as optical circuit switching (OCS). Services enabled by OCS include wavelength routing, dynamic bandwidth allocation and protection switching. With network elements such as reconfigurable optical add/drop multiplexers (ROADMs) and optical cross connects (OXCs) now being deployed along with the generalized multiprotocol label switching (GMPLS) control plane this represents the current state of the art in commercial networks. These networks often employ erbium doped fiber amplifiers (EDFAs) to boost the optical signal to noise ratio of the WDM channels and as channel configurations change, wavelength dependent gain variations in the EDFAs can lead to channel power divergence that can result in significant performance degradation. This issue is examined in detail using a reconfigurable wavelength division multiplexed (WDM) network testbed and results show the severe impact that channel reconfiguration can have on transmission performance. Following the slow switching work the focus shifts to one of the key enabling technologies for fast optical switching, namely the tunable laser. Tunable lasers which can switch on the nanosecond timescale will be required in the transmitters and wavelength converters of optical packet switching networks. The switching times and frequency drifts, both of commercially available lasers, and of novel devices are investigated and performance issues which can arise due to this frequency drift are examined. An optical packet switching transmitter based on a novel label switching technique and employing one of the fast tunable lasers is designed and employed in a dual channel WDM packet switching system. In depth performance evaluations of this labelling scheme and packet switching system show the detrimental impact that wavelength drift can have on such systems