Locally deforming continuation method based on a shooting method for a class of optimal control problems

This paper proposes a new continuation method for solving optimal control problems. The proposed method is based on a shooting method. In the proposed method, a cost function of an optimal control problem is locally deformed to find the solution of the problem in a stable way. This paper also analyses a relationship between the variation of the continuation parameter and the proximity of the solutions before and after a deformation in the proposed method. The obtained relation provides guidance on how to deform the continuation parameter. The effectiveness of this method is confirmed through numerical examples

Biologically Inspired Guidance for Autonomous Systems

Animals and humans can perform purposeful actions using only their senses. Birds can perch on branches; bats use echolocation to hunt prey and humans are able to control vehicles. It must therefore be possible for autonomous systems to replicate this autonomous behaviour if an understanding of how animals and humans perceive their environment and guide their movements is obtained. Tau theory offers a potential explanation as to how this is achieved in nature. Tau theory posits, that in combination with the so-called ‘motion guides’, animals and humans perform useful movements by closing action-gaps, i.e. gaps between the current state and a desired state. The theory suggests that the variabl

Preference-Based Trajectory Generation

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/76820/1/AIAA-36214-892.pd

Design, modeling, and control of an autonomous legged-wheeled hybrid robotic vehicle with non-rigid joints

This paper presents a legged-wheeled hybrid robotic vehicle that uses a combination of rigid and non-rigid joints, allowing it to be more impact-tolerant. The robot has four legs, each one with three degrees of freedom. Each leg has two non-rigid rotational joints with completely passive components for damping and accumulation of kinetic energy, one rigid rotational joint, and a driving wheel. Each leg uses three independent DC motors—one for each joint, as well as a fourth one for driving the wheel. The four legs have the same position configuration, except for the upper hip joint. The vehicle was designed to be modular, low-cost, and its parts to be interchangeable. Beyond this, the vehicle has multiple operation modes, including a low-power mode. Across this article, the design, modeling, and control stages are presented, as well as the communication strategy. A prototype platform was built to serve as a test bed, which is described throughout the article. The mechanical design and applied hardware for each leg have been improved, and these changes are described. The mechanical and hardware structure of the complete robot is also presented, as well as the software and communication approaches. Moreover, a realistic simulation is introduced, along with the obtained results.info:eu-repo/semantics/publishedVersio

Operational criteria for battlefield vehicles

textModern military ground vehicles are no longer able to respond effectively to the rapidly changing mission requirements of modern military conflicts. Military vehicle architectures, which utilize passive suspension components and traditional drivetrain/steering systems, do not provide the operational flexibility to meet the demands of the operator. Advances in intelligent actuation technology allow for the development of a new vehicle architecture - the Intelligent Corner Vehicle (ICV). The ICV utilizes intelligent actuator technology to actively control the four degrees of freedom of each wheel of the vehicle - drive, camber, steering, and suspension. The utilization of intelligent actuation requires the characterization of the motions and behavior of the tire and the vehicle chassis in order to effectively apply the tire to the road surface - the development of vehicle performance criteria. A brief review of the state of wheeled military systems is presented. Many modern military vehicles were designed to improve protection at the expense of mobility - a process that has had negative effects on vehicle capability. An overview of the pneumatic tire used for wheeled vehicles is presented, highlighting the nonlinearities of tire behavior. The complexity of tire force generation drives the need for the application of intelligent actuation. Traditional actuation of wheel motion is presented along with a variety of current efforts to apply intelligent actuation to individual degrees of freedom of the tire. These efforts can be shown to improve vehicle performance, but intelligent actuation must be applied to all aspects of tire motion, requiring the use of the ICV architecture and the generation of performance criteria by which the complex motion of the vehicle may be evaluated. The Robotics Research Group has a history of developing and evaluating performance criteria for complex dynamic systems. and review of performance criteria developed for serial chain robotics is presented. These criteria address task independent actuator motion in addition to actuator ranges and limits, and their application to the ICV is discussed. A brief overview of several important concepts of classical vehicle dynamics are presented. The application of criteria derived from these concepts to the ICV architecture is discussed. This report presents the complexities of tire behavior and vehicle motion, the need for alternative architectures (the ICV), and a variety of performance criteria required to evaluate vehicle motion in real time. Criteria that are presented are summarized along with their definition and physical meaning. Future work for the development of the ICV involves the generation of a vehicle model for evaluating the application and range values of the presented criteria.Mechanical Engineerin

Implementation of the autonomous functionalities on an electric vehicle platform for research and education

Self-driving cars have recently captured the attention of researchers and car manufacturing markets. Depending upon the level of autonomy, the cars are made capable of traversing from one point to another autonomously. In order to achieve this, sophisticated sensors need to be utilized. A complex set of algorithms is required to use the sensors data in order to navigate the vehicle along the desired trajectory. Polaris is an electric vehicle platform provided for research and education purposes at Aalto University. The primary focus of the thesis was to utilize all the sensors provided in Polaris to their full potential. So that, essential data from each sensor is made available to be further utilized either by a specific automation algorithm or by some mapping routine. For any autonomous robotic system, the first step towards automation is localization. That is to determine the current position of the robot in a given environment. Different sensors mounted over the platform provide such measurements in different frames of reference. The thesis utilizes the GPS based localization solution combined with the LiDAR data and wheel odometry to perform autonomous tasks. Robot Operating System is used as the software development tool in thesis work. Autonomous tasks include the determination of the global as well as the local trajectories. The endpoints of the global trajectories are dictated by the set of predefined GPS waypoints. This is called target-point navigation. A path needs to be planned that avoids all the obstacles. Based on the planned path, a set of velocity commands are issued by the embedded controller. The velocity commands are then fed to the actuators to move the vehicle along the planned trajectory

Mobile Robots Navigation

Mobile robots navigation includes different interrelated activities: (i) perception, as obtaining and interpreting sensory information; (ii) exploration, as the strategy that guides the robot to select the next direction to go; (iii) mapping, involving the construction of a spatial representation by using the sensory information perceived; (iv) localization, as the strategy to estimate the robot position within the spatial map; (v) path planning, as the strategy to find a path towards a goal location being optimal or not; and (vi) path execution, where motor actions are determined and adapted to environmental changes. The book addresses those activities by integrating results from the research work of several authors all over the world. Research cases are documented in 32 chapters organized within 7 categories next described

Design and Experimental Evaluation of a Hybrid Wheeled-Leg Exploration Rover in the Context of Multi-Robot Systems

With this dissertation, the electromechanic design, implementation, locomotion control, and experimental evaluation of a novel type of hybrid wheeled-leg exploration rover are presented. The actively articulated suspension system of the rover is the basis for advanced locomotive capabilities of a mobile exploration robot. The developed locomotion control system abstracts the complex kinematics of the suspension system and provides platform control inputs usable by autonomous behaviors or human remote control. Design and control of the suspension system as well as experimentation with the resulting rover are in the focus of this thesis. The rover is part of a heterogeneous modular multi-robot exploration system with an aspired sample return mission to the lunar south pole or currently hard-to-access regions on Mars. The multi-robot system pursues a modular and reconfigurable design methodology. It combines heterogeneous robots with different locomotion capabilities for enhanced overall performance. Consequently, the design of the multi-robot system is presented as the frame of the rover developments. The requirements for the rover design originating from the deployment in a modular multi-robot system are accentuated and summarized in this thesis