On tracking and disturbance rejection by adaptive control

For linear minimum-phase relative-degree-one systems subject to disturbances and nonlinear perturbations, results pertaining to disturbance rejection and adaptive tracking of constant reference signals are presented and discussed in the context of related results in the literature

Improving Trajectory Tracking Performance of Robotic Manipulator Using Neural Online Torque Compensator

This paper introduces an intelligent adaptive control strategy called Neural Online Torque Compensator (NOTC) based on the learning capabilities of artificial neural networks (ANNs) in order to compensate for the structured and unstructured uncertainties in the parameters of a robotic manipulator trajectory tracking control system. A two-layered neural perceptron was designed and trained using an Error Backpropagation Algorithm (EBA) to learn the difference between the actual torques generated by the joints of a 2-DOF robotic arm and the torques generated by the computed torque disturbance rejection controller that was designed previously. An objected oriented approach based on Modelica was adopted to develop a model for the whole robotic arm trajectory tracking control system. The simulation results obtained proved the effectiveness of the NOTC compensator in improving the performance of the computed torque disturbance rejection controller by compensating for both structured and unstructured uncertainties

Advances In Internal Model Principle Control Theory

In this thesis, two advanced implementations of the internal model principle (IMP) are presented. The first is the identification of exponentially damped sinusoidal (EDS) signals with unknown parameters which are widely used to model audio signals. This application is developed in discrete time as a signal processing problem. An IMP based adaptive algorithm is developed for estimating two EDS parameters, the damping factor and frequency. The stability and convergence of this adaptive algorithm is analyzed based on a discrete time two time scale averaging theory. Simulation results demonstrate the identification performance of the proposed algorithm and verify its stability. The second advanced implementation of the IMP control theory is the rejection of disturbances consisting of both predictable and unpredictable components. An IMP controller is used for rejecting predictable disturbances. But the phase lag introduced by the IMP controller limits the rejection capability of the wideband disturbance controller, which is used for attenuating unpredictable disturbance, such as white noise. A combination of open and closed-loop control strategy is presented. In the closed-loop mode, both controllers are active. Once the tracking error is insignificant, the input to the IMP controller is disconnected while its output control action is maintained. In the open loop mode, the wideband disturbance controller is made more aggressive for attenuating white noise. Depending on the level of the tracking error, the input to the IMP controller is connected intermittently. Thus the system switches between open and closed-loop modes. A state feedback controller is designed as the wideband disturbance controller in this application. Two types of predictable disturbances are considered, constant and periodic. For a constant disturbance, an integral controller, the simplest IMP controller, is used. For a periodic disturbance with unknown frequencies, adaptive IMP controllers are used to estimate the frequencies before cancelling the disturbances. An extended multiple Lyapunov functions (MLF) theorem is developed for the stability analysis of this intermittent control strategy. Simulation results justify the optimal rejection performance of this switched control by comparing with two other traditional controllers

Doctor of Philosophy

dissertationThe dissertation is concerned with the development and analysis of adaptive algorithms for the rejection of unknown periodic disturbances acting on an unknown system. The rejection of periodic disturbances is a problem frequently encountered in control engineering, and in active noise and vibration control in particular. A new adaptive algorithm is presented for situations where the plant is unknown and may be time-varying. Known as the adaptive harmonic steady-state or ADHSS algorithm, the approach consists in obtaining on-line estimates of the plant frequency response and of the disturbance parameters. The estimates are used to continuously update control parameters and cancel or minimize the effect of the disturbance. The dynamic behavior of the algorithm is analyzed using averaging theory. Averaging theory allows the nonlinear time-varying closed-loop system to be approximated by a nonlinear time-invariant system. Extensions of the algorithm to systems with multiple inputs/outputs and disturbances consisting of multiple frequency components are provided. After considering the rejection of sinusoidal disturbances of known frequency, the rejection of disturbances of unknown frequency acting on an unknown and time-varying plant is considered. This involves the addition of frequency estimation to the ADHSS algorithm. It is shown that when magnitude phase-locked loop (MPLL) frequency estimation is integrated with the ADHSS algorithm, the two components work together in such a way that the control input does not prevent frequency tracking by the frequency estimator and so that the order of the ADHSS can be reduced. While MPLL frequency estimation can be combined favorably with ADHSS disturbance rejection, stability is limited due to the local convergence properties of the MPLL. Thus, a new frequency estimation algorithm with semiglobal stability properties is introduced. Based on the theory of asynchronous electric machines, the induction motor frequency estimator, or IMFE, is shown to be appropriate for disturbance cancellation and, with modification, is shown to increase stability of the combined ADHSS/MPLL algorithm. Extensive active noise control experiments demonstrate the performance of the algorithms presented in the dissertation when disturbance and plant parameters are changing

Adaptive self-recurrent wavelet neural network and sliding mode controller/observer for a slider crank mechanism

In this paper, a novel control strategy based on an adaptive Self-Recurrent Wavelet Neural Network (SRWNN) and a sliding mode controller/observer for a slider crank mechanism is proposed. The aim is to reduce the tracking error of the linear displacement of this mechanism while following a specified trajectory. The controller design consists of two parts. The first one is a sliding mode control strategy and the second part is an SRWNN controller. This controller is trained offline first, and then the SRWNN weights are updated online by the adaptive control law. Apart from the hybrid control strategy proposed in this paper, a velocity observer is implemented to replace the use of velocity sensors. The outcomes obtained in the numerical experiment section prove that the smallest tracking error is obtained for the linear and angular displacements in comparison with other strategies found in literature due to the uncertainty and disturbance rejection properties of the sliding mode and the self-recurrent wavelet neural network controllers.Peer ReviewedPostprint (author's final draft

Additive-Decomposition-Based Output Feedback Tracking Control for Systems with Measurable Nonlinearities and Unknown Disturbances

In this paper, a new control scheme, called as additive-decomposition-based tracking control, is proposed to solve the output feedback tracking problem for a class of systems with measurable nonlinearities and unknown disturbances. By the additive decomposition, the output feedback tracking task for the considered nonlinear system is decomposed into three independent subtasks: a pure tracking subtask for a linear time invariant (LTI) system, a pure rejection subtask for another LTI system and a stabilization subtask for a nonlinear system. By benefiting from the decomposition, the proposed additive-decomposition-based tracking control scheme i) can give a potential way to avoid conflict among tracking performance, rejection performance and robustness, and ii) can mix both design in time domain and frequency domain for one controller design. To demonstrate the effectiveness, the output feedback tracking problem for a single-link robot arm subject to a sinusoidal or a general disturbance is solved respectively, where the transfer function method for tracking and rejection and backstepping method for stabilization are applied together to the design.Comment: 23 pages, 6 figure

A Novel Internal Model Control Scheme for Adaptive Tracking of Nonlinear Dynamic Plants

Adaptive tracking of nonlinear dynamic plants is presently an active area of research. The design of on-line nonlinear controller for tracking of nonlinear plants has always been an inevitable computationally complex procedure. In this paper a novel method to facilitate controller design for output tracking of wide range of nonlinear plants based on a new control oriented model known as U-model is presented. The use of U-model alleviates the computational complexity of on-line nonlinear controller design that arises when using other modelling frame works such as NARMAX model. The U-model utilizes only past data for plant modelling and standard root solving algorithm for control law formulation. The control structure of the scheme contains two feedback loops. The innerloop, where inverse of the plant is developed based on adaptive U-model. Outer-loop, which is designed using linear control theory to improve tracking and disturbance rejection properties of the overall system. The effectiveness of the proposed scheme is illustrated by simulating a nonlinear plant and by real-time speed control of a laboratory scale DC moto