On the use of discrete cosine transforms for multicarrier communications

In this correspondence, the conditions to use any kind of discrete cosine transform (DCT) for multicarrier data transmission are derived. The symmetric convolution-multiplication property of each DCT implies that when symmetric convolution is performed in the time domain, an element-by-element multiplication is performed in the corresponding discrete trigonometric domain. Therefore, appending symmetric redun-dancy (as prefix and suffix) into each data symbol to be transmitted, and also enforcing symmetry for the equivalent channel impulse response, the linear convolution performed in the transmission channel becomes a symmetric convolution in those samples of interest. Furthermore, the channel equalization can be carried out by means of a bank of scalars in the corresponding discrete cosine transform domain. The expressions for obtaining the value of each scalar corresponding to these one-tap per subcarrier equalizers are presented. This study is completed with several computer simulations in mobile broadband wireless communication scenarios, considering the presence of carrier frequency offset (CFO). The obtained results indicate that the proposed systems outperform the standardized ones based on the DFT

Efficient DCT-MCM Detection for Single and Multi-Antenna Wireless Systems

The discrete cosine transform (DCT) based multicarrier modulation (MCM) system is regarded as one of the promising transmission techniques for future wireless communications. By employing cosine basis as orthogonal functions for multiplexing each real-valued symbol with symbol period of T, it is able to maintain the subcarrier orthogonality while reducing frequency spacing to 1/(2T) Hz, which is only half of that compared to discrete Fourier transform (DFT) based multicarrier systems. In this paper, following one of the effective transmission models by which zeros are inserted as guard sequence and the DCT operation at the receiver is replaced by DFT of double length, we reformulate and evaluate three classic detection methods by appropriately processing the post-DFT signals both for single antenna and multiple-input multiple-output (MIMO) DCT-MCM systems. In all cases, we show that with our reformulated detection approaches, DCT-MCM schemes can outperform, in terms of error-rate, conventional OFDM-based systems

A novel scheme of multicarrier modulation with the discrete cosine transform

In this work, we derive a novel multicarrier modulation based on the Type-I even discrete cosine transform (DCT1e), which includes new procedures to carry out both the channel estimation and the signal reconstruction. By using a small number of training symbols, we achieve an accurate estimation of the channel's impulse response (CIR) using a novel mirror, replicate and add (MIRA) procedure. The proposed scheme does not require knowing the length of the CIR and is valid even in the presence of spectral nones. We provide the theoretical results that guarantee the validity of the developed technique. After the estimation process, the transmitted symbols are also reconstructed by means of the DCT1e using the same novel MIRA scheme. The conditions that ensure a perfect reconstruction in the absence of noise are also provided in this case. Numerical simulations illustrate the excellent behaviour of the proposed approach, both in terms of channel estimation and recovery of the transmitted information.Ministerio de Economía y Competitivida

Performance analysis and optimization of DCT-based multicarrier system on frequency-selective fading channels

Regarded as one of the most promising transmission techniques for future wireless communications, the discrete cosine transform (DCT) based multicarrier modulation (MCM) system employs cosine basis as orthogonal functions for real-modulated symbols multiplexing, by which the minimum orthogonal frequency spacing can be reduced by half compared to discrete Fourier transform (DFT) based one. With a time-reversed pre-filter employed at the front of the receiver, interference-free one-tap equalization is achievable for the DCT-based systems. However, due to the correlated pre-filtering operation in time domain, the signal-to-noise ratio (SNR) is enhanced as a result at the output. This leads to reformulated detection criterion to compensate for such filtering effect, rendering minimum-mean-square-error (MMSE) and maximum likelihood (ML) detections applicable to the DCT-based multicarrier system. In this paper, following on the pre-filtering based DCT-MCM model that build in the literature work, we extend the overall system by considering both transceiver perfections and imperfections, where frequency offset, time offset and insufficient guard sequence are included. In the presence of those imperfection errors, the DCT-MCM systems are analysed in terms of desired signal power, inter-carrier interference (ICI) and inter-symbol interference (ISI). Thereafter, new detection algorithms based on zero forcing (ZF) iterative results are proposed to mitigate the imperfection effect. Numerical results show that the theoretical analysis match the simulation results, and the proposed iterative detection algorithms are able to improve the overall system performance significantly

Receiver Design for DCT Based Multicarrier Signals

DCT based multicarrier system also known as fast orthogonal frequency division multiplexing (FOFDM) is a promising multicarrier transmission technique that requires half the subcarrier spacing compared to conventional OFDM technique. The signal processing complexity and power consumption of such system is also less due to its real arithmetic operations compared to DFT based system (OFDM) that require complex arithmetic operations. However, unlike OFDM, FOFDM requires a finite impulse response (FIR) front-end pre-filter at the receiver to achieve single-tap equalization for simplifying the receiver design. The receiver design can be further improved using the fact that FOFDM system transmits real valued symbols compared to complex valued symbols in conventional OFDM. This fact enabled us to improve the system performance by exploiting the improperness of such DCT based multicarrier signals using widely linear processing (WLP). In this paper, a novel equalization technique using WLP is proposed to effectively improve the system performance, and it is shown that the proposed FOFDM receiver can provide better estimate of the tra

Feedforward data-aided phase noise estimation from a DCT basis expansion

This contribution deals with phase noise estimation from pilot symbols. The phase noise process is approximated by an expansion of discrete cosine transform (DCT) basis functions containing only a few terms. We propose a feedforward algorithm that estimates the DCT coefficients without requiring detailed knowledge about the phase noise statistics. We demonstrate that the resulting (linearized) mean-square phase estimation error consists of two contributions: a contribution from the additive noise, that equals the Cramer-Rao lower bound, and a noise independent contribution, that results front the phase noise modeling error. We investigate the effect of the symbol sequence length, the pilot symbol positions, the number of pilot symbols, and the number of estimated DCT coefficients it the estimation accuracy and on the corresponding bit error rate (PER). We propose a pilot symbol configuration allowing to estimate any number of DCT coefficients not exceeding the number of pilot Symbols, providing a considerable Performance improvement as compared to other pilot symbol configurations. For large block sizes, the DCT-based estimation algorithm substantially outperforms algorithms that estimate only the time-average or the linear trend of the carrier phase. Copyright (C) 2009 J. Bhatti and M. Moeneclaey