A NEW ENERGY EFFICIENT ADAPTIVE HYBRID ERROR CORRECTION TECHNIQUE FOR UNDERWATER WIRELESS SENSORS NETWORKS

Underwater wireless sensors networks find many applications in today's life. However underwater sensors are still relatively expensive. They suffer from short lifetime which is limited by batteries lifetime as it is difficult to recharge or even replace batteries in harsh aquatic medium. When the battery is depleted the sensor is of no use anymore. So designing energy efficient communication protocols is an important issue for underwater sensors networks. Underwater is characterized by variable channel conditions, whereas underwater sensors are mobile due to water currents leading to variable distances between sensors. This variability in channel conditions and distances between sensors leads to inefficiency in energy consumptions when using fixed type of error correction technique. In this thesis, a mathematical energy efficiency derivations for the two main error correction techniques (Automatic Repeat request (ARQ) and Forward Error Correction (FEC)) in underwater environment has been done. The results from those derivations show that one technique is more energy efficient than the other below specific distance, where as the other is more energy efficient after this distance. This specific distance is found to be unfixed and varies with the variation in channel conditions and packet size. So using fixed error correction technique for specific distance is not accurate. Simulation has been done which validate the mathematical derivations. Based on the above derivation results Adaptive Hybrid Error Correction (AHEC) technique which adaptively changes the error correction technique to the technique that gives the highest energy efficiency for the current channel conditions and distances has been proposed. The technique uses an adaptation algorithm which depends on a pre-calculated packet acceptance rate (PAR) ranges look-up table, current PAR, packet length and current error correction technique used. AHEC viii technique has been found to have better energy saving compared with the techniques that depend on pure ARQ or FEC only. This saving ranges from 10 to 70 % in energy saving in ARQ case , and 7 to 10 % in energy saving in FEC case depending on current channel conditions and distance .It has also been compared with the technique that uses variable power supply in adaptation (Adaptive Variable Power Supply (AVPS)) and it achieves between 20 to 60 % in energy saving depending on current channel conditions and distance. It has also been compared with Adaptive Redundancy Reliable Transport Protocol (ARRTP), and it achieves between 10 to 80 % in energy saving depending on the current channel conditions and distance. The adaptation algorithm which depends on PAR has also been applied in adaptation to the ARRTP which originally depends only on inter-node distance in adaptation. PAR take both of distance and channel conditions into consideration. This technique is called PAR-based ARRTP, and the results shows better adaptation than the basic ARRTP in variable channel conditions cases. AHEC technique has also been applied with the bounded distance routing protocol to minimize the effects of variable channel conditions. Bounded distance routing protocol design depends on choosing specific number of relays between sender and receiver that minimize the total energy consumptions. This specific number of relays varies with the variation in channel conditions. The results show a deviation in number of relays from 6 when fixed error correction technique is used to only 2 when AHEC technique is used with it

Cooperative mobility maintenance techniques for information extraction from mobile wireless sensor networks

Recent advances in the development of microprocessors, microsensors, ad-hoc wireless networking and information fusion algorithms led to increasingly capable Wireless Sensor Networks (WSNs). Besides severe resource constraints, sensor nodes mobility is considered a fundamental characteristic of WSNs. Information Extraction (IE) is a key research area within WSNs that has been characterised in a variety of ways, ranging from a description of its purposes to reasonably abstract models of its processes and components. The problem of IE is a challenging task in mobile WSNs for several reasons including: the topology changes rapidly; calculation of trajectories and velocities is not a trivial task; increased data loss and data delivery delays; and other context and application specific challenges. These challenges offer fundamentally new research problems. There is a wide body of literature about IE from static WSNs. These approaches are proved to be effective and efficient. However, there are few attempts to address the problem of IE from mobile WSNs. These attempts dealt with mobility as the need arises and do not deal with the fundamental challenges and variations introduced by mobility on the WSNs. The aim of this thesis is to develop a solution for IE from mobile WSNs. This aim is achieved through the development of a middle-layer solution, which enables IE approaches that were designed for the static WSNs to operate in the presence of multiple mobile nodes. This thesis contributes toward the design of a new self-stabilisation algorithm that provides autonomous adaptability against nodes mobility in a transparent manner to both upper network layers and user applications. In addition, this thesis proposes a dynamic network partitioning protocol to achieve high quality of information, scalability and load balancing. The proposed solution is flexible, may be applied to different application domains, and less complex than many existing approaches. The simplicity of the solutions neither demands great computational efforts nor large amounts of energy conservation. Intensive simulation experiments with real-life parameters provide evidence of the efficiency of the proposed solution. Performance experimentations demonstrate that the integrated DNP/SS protocol outperforms its rival in the literature in terms of timeliness (by up to 22%), packet delivery ratio (by up to 13%), network scalability (by up to 25%), network lifetime (by up to 40.6%), and energy consumption (by up to 39.5%). Furthermore, it proves that DNP/SS successfully allows the deployment of static-oriented IE approaches in hybrid networks without any modifications or adaptations

Emergence in the security of protocols for mobile ad-hoc networks

This thesis is concerned with the study of secure wireless routing protocols, which have been deployed for the purpose of exchanging information in an adhoc networking enviromnent. A discrete event simulator is developed, utilising an adaptive systems modelling approach and emergence that aims to assess networking protocols in the presence of adversarial behaviour. The model is used in conjunction with the characteristics that routing protocols have and also a number of cryptographic primitives that can be deployed in order to safeguard the information being exchanged. It is shown that both adversarial behaviour, as well as protocol descriptions can be described in a way that allows for them to be treated as input on the machine level. Within the system, the output generated selects the fittest protocol design capable of withstanding one or more particular type of attacks. As a result, a number of new and improved protocol specifications are presented and benchmarked against conventional metrics, such as throughput, latency and delivery criteria. From this process, an architecture for designing wireless routing protocols based on a number of security criteria is presented, whereupon the decision of using particular characteristics in a specification has been passed onto the machine level

Emergence in the security of protocols for mobile ad-hoc networks

This thesis is concerned with the study of secure wireless routing protocols, which have been deployed for the purpose of exchanging information in an adhoc networking enviromnent. A discrete event simulator is developed, utilising an adaptive systems modelling approach and emergence that aims to assess networking protocols in the presence of adversarial behaviour. The model is used in conjunction with the characteristics that routing protocols have and also a number of cryptographic primitives that can be deployed in order to safeguard the information being exchanged. It is shown that both adversarial behaviour, as well as protocol descriptions can be described in a way that allows for them to be treated as input on the machine level. Within the system, the output generated selects the fittest protocol design capable of withstanding one or more particular type of attacks. As a result, a number of new and improved protocol specifications are presented and benchmarked against conventional metrics, such as throughput, latency and delivery criteria. From this process, an architecture for designing wireless routing protocols based on a number of security criteria is presented, whereupon the decision of using particular characteristics in a specification has been passed onto the machine level.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

A High-speed Reconfigurable Free Space Optical Communication System Utilizing Software Defined Radio Environment

Free space optical (FSO) communication allows for high-speed data transmissions while also being extremely cost-effective by using visible or infrared wavelengths to transmit and receive data wirelessly through the free space channel. However, FSO links are highly susceptible to the effects of the atmosphere, particularly turbulence, smoke, and fog. On the other hand, FSO itself does not provide enough flexibility to address the issue of such blockage and obstruction caused by objects and atmospheric conditions. This research investigates, proposes, and evaluates a software defined multiple input multiple output (MIMO) FSO system to ensure link availability and reliability under weather conditions as part of the last mile access in the 5th generation, 6th generation, and beyond. Software defined radio (SDR) technology is adopted in order to provide a certain degree of flexibility to the optical wireless communications system. The scope of this research focuses on the design, validation, implementation, and evaluation of a novel adaptive switching algorithm i.e., activating additional transmitters of a MIMO FSO system using a software defined ecosystem. The main issues are the compactness of the experimental design; the limitation of software-oriented signal generation; robustness; reliability; and the quality of service. As part of the system design, the thresholding method, a decision-making process via the feedback link, and a spatial diversity technique is adopted to carry out the adaptive switching. The adaptive switching is performed via a feedback link in which the atmospheric loss and scintillation index are calculated for fog and turbulence respectively. The initial design is implemented in SDR/ GNURadio for a real-time emulation of the proposed system to enhance the system flexibility of a traditional MIMO FSO system. A bit-by-bit comparison is performed with the GNURadio signal processing block and BERT for a real-time BER estimation. However, based on the initial results, the switching mechanism can only overcome the effect of turbulence at a certain level. A new design to mainly mitigate the varying fog conditions is proposed based on the SDR-based adaptive switching for a gigabit ethernet (GbE) MIMO FSO system and tested in a 5 m dedicated atmospheric chamber. The proposed system is implemented using off-the-shelf components such as a media converter, small form pluggable transceivers, optical switch, and power meter to estimate the channel state information. A new Schmitt trigger-based thresholding method is also introduced. The proposed software defined GbE MIMO FSO with an adaptive switching algorithm is fabricated, implemented, and investigated. The results are also compared with the real-time simulated data. Since the purpose of this Ph.D. is to explain and demonstrate the proof of concept for the proposed SDR-MIMO FSO system, the emphasis has been on the design, evaluation, and minimal performance requirements rather than maximizing the data rate. The outcome of the thesis will be a huge degree of flexibility and mitigation property MIMO FSO can offer with the help of SDR. It will be shown that the designed system has the capability to provide data transmission with 99.999% availability with a packet error rate and data rate of 7.2 ×10−2 and ~120 Mbps respectively, under extremely harsh fog conditions with visibility V of < 11 m

Proceedings of the Second International Mobile Satellite Conference (IMSC 1990)

Presented here are the proceedings of the Second International Mobile Satellite Conference (IMSC), held June 17-20, 1990 in Ottawa, Canada. Topics covered include future mobile satellite communications concepts, aeronautical applications, modulation and coding, propagation and experimental systems, mobile terminal equipment, network architecture and control, regulatory and policy considerations, vehicle antennas, and speech compression

Tiled microprocessors

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.Includes bibliographical references (p. 251-258).Current-day microprocessors have reached the point of diminishing returns due to inherent scalability limitations. This thesis examines the tiled microprocessor, a class of microprocessor which is physically scalable but inherits many of the desirable properties of conventional microprocessors. Tiled microprocessors are composed of an array of replicated tiles connected by a special class of network, the Scalar Operand Network (SON), which is optimized for low-latency, low-occupancy communication between remote ALUs on different tiles. Tiled microprocessors can be constructed to scale to 100's or 1000's of functional units. This thesis identifies seven key criteria for achieving physical scalability in tiled microprocessors. It employs an archetypal tiled microprocessor to examine the challenges in achieving these criteria and to explore the properties of Scalar Operand Networks. The thesis develops the field of SONs in three major ways: it introduces the 5-tuple performance metric, it describes a complete, high-frequency SON implementation, and it proposes a taxonomy, called AsTrO, for categorizing them.(cont.) To develop these ideas, the thesis details the design, implementation and analysis of a tiled microprocessor prototype, the Raw Microprocessor, which was implemented at MIT in 180 nm technology. Overall, compared to Raw, recent commercial processors with half the transistors required 30x as many lines of code, occupied 100x as many designers, contained 50x as many pre-tapeout bugs, and resulted in 33x as many post-tapeout bugs. At the same time, the Raw microprocessor proves to be more versatile in exploiting ILP, stream, and server-farm workloads with modest to large amounts of parallelism.by Michael Bedford Taylor.Ph.D

Wireless personal area networks and free-space optical links

This thesis is concerned with the link layer design of indoor (IrDA) and outdoor infrared links, as well as the performance of the higher layers of two major Wireless Personal Area Network (WPAN) technologies: IrDA and Bluetooth. Recent advancesin wireless technology have made it possible to put networking technology into small portable devices. During the past few years, WPAN technologies have been the subject of a tremendous growth both in research and development. Although many studies have been conducted on wireless links to address different issues on physical and link layers, wireless communications are still characterised by high error rates becauseof the frequently changing medium. On the other hand, performance studies of the higher layers are also very important. In this thesis, for the first time, a comprehensivestudy of the interactions betweenthe higher and the lower protocol layers of IrDA and Bluetooth has been carried out to improve the overall system performance. Mathematical models for the link layers are introduced for the infrared systems: infrared data association (IrDA) and free space optics (FSO). A model for the IrDA (indoor infrared) link layer is developed by considering the presence of bit errors. Based on this model, the effect of propagation delay on the link through put is investigated. An optimization study is also carried out to maximize the link throughput. FSO (outdoor infrared) links are often characterized by high speed and long link distance. A mathematical model for the FSO link layer is also developed. Significant improvement of the link throughput is achieved by optimizing the link parameters. Based on the link layer model, the performance of the IrDA higher layers (transport, session and application layers) is investigated. First, a mathematical model of TinyTP (transport protocol) is elaborated and subsequently verified by simulations. The effects of multiple connections and available buffer size are investigated. The throughput at the TinyTP level is optimized for different buffer sizes. Subsequently, the session layer, including Object Exchange (OBEX) and IrDA Burst (IrBurst) protocols, is studied and modelled. The derived mathematical model is verified by simulation results. A set of protocol parameters and hardware selection guidelines is proposed to optimize the overall system performance while also keeping the hardware requirementto a minimum. Finally, two rapidly developing IrDA applications, IrDA financial messaging(IrFM) and IrDA simple connection (IrSC), are studied. IrFM is investigated by comparison to other digital payment technologies, while the performance of IrSC is compared in two different technical approaches. In order to improve the throughput and minimize the transmission delay for the Bluetooth data applications, a systematic analysis is carried out for the Bluetooth Logical Link Control and Adaptation Layer Protocol (L2CAP). L2CAP is layered above the Bluetooth link layer (Baseband) and is essential to Bluetooth data applications. A simple and intuitive mathematical model is developed to derive simple equations for the L2CAP throughput and the average packet delay. The derived throughput equation, which is validated by simulations, takes into account bit errors as well as packet retry limits. Finally, a number of easy-to-implement performance enhancement schemes are proposed, including the optimum use of the protocol parameters