5,057 research outputs found
Coded DS-CDMA Systems with Iterative Channel Estimation and no Pilot Symbols
In this paper, we describe direct-sequence code-division multiple-access
(DS-CDMA) systems with quadriphase-shift keying in which channel estimation,
coherent demodulation, and decoding are iteratively performed without the use
of any training or pilot symbols. An expectation-maximization
channel-estimation algorithm for the fading amplitude, phase, and the
interference power spectral density (PSD) due to the combined interference and
thermal noise is proposed for DS-CDMA systems with irregular repeat-accumulate
codes. After initial estimates of the fading amplitude, phase, and interference
PSD are obtained from the received symbols, subsequent values of these
parameters are iteratively updated by using the soft feedback from the channel
decoder. The updated estimates are combined with the received symbols and
iteratively passed to the decoder. The elimination of pilot symbols simplifies
the system design and allows either an enhanced information throughput, an
improved bit error rate, or greater spectral efficiency. The interference-PSD
estimation enables DS-CDMA systems to significantly suppress interference.Comment: To appear, IEEE Transactions on Wireless Communication
Massive MIMO for Next Generation Wireless Systems
Multi-user Multiple-Input Multiple-Output (MIMO) offers big advantages over
conventional point-to-point MIMO: it works with cheap single-antenna terminals,
a rich scattering environment is not required, and resource allocation is
simplified because every active terminal utilizes all of the time-frequency
bins. However, multi-user MIMO, as originally envisioned with roughly equal
numbers of service-antennas and terminals and frequency division duplex
operation, is not a scalable technology. Massive MIMO (also known as
"Large-Scale Antenna Systems", "Very Large MIMO", "Hyper MIMO", "Full-Dimension
MIMO" & "ARGOS") makes a clean break with current practice through the use of a
large excess of service-antennas over active terminals and time division duplex
operation. Extra antennas help by focusing energy into ever-smaller regions of
space to bring huge improvements in throughput and radiated energy efficiency.
Other benefits of massive MIMO include the extensive use of inexpensive
low-power components, reduced latency, simplification of the media access
control (MAC) layer, and robustness to intentional jamming. The anticipated
throughput depend on the propagation environment providing asymptotically
orthogonal channels to the terminals, but so far experiments have not disclosed
any limitations in this regard. While massive MIMO renders many traditional
research problems irrelevant, it uncovers entirely new problems that urgently
need attention: the challenge of making many low-cost low-precision components
that work effectively together, acquisition and synchronization for
newly-joined terminals, the exploitation of extra degrees of freedom provided
by the excess of service-antennas, reducing internal power consumption to
achieve total energy efficiency reductions, and finding new deployment
scenarios. This paper presents an overview of the massive MIMO concept and
contemporary research.Comment: Final manuscript, to appear in IEEE Communications Magazin
Interference Alignment for Cognitive Radio Communications and Networks: A Survey
© 2019 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).Interference alignment (IA) is an innovative wireless transmission strategy that has shown to be a promising technique for achieving optimal capacity scaling of a multiuser interference channel at asymptotically high-signal-to-noise ratio (SNR). Transmitters exploit the availability of multiple signaling dimensions in order to align their mutual interference at the receivers. Most of the research has focused on developing algorithms for determining alignment solutions as well as proving interference alignment’s theoretical ability to achieve the maximum degrees of freedom in a wireless network. Cognitive radio, on the other hand, is a technique used to improve the utilization of the radio spectrum by opportunistically sensing and accessing unused licensed frequency spectrum, without causing harmful interference to the licensed users. With the increased deployment of wireless services, the possibility of detecting unused frequency spectrum becomes diminished. Thus, the concept of introducing interference alignment in cognitive radio has become a very attractive proposition. This paper provides a survey of the implementation of IA in cognitive radio under the main research paradigms, along with a summary and analysis of results under each system model.Peer reviewe
An Efficient Data-aided Synchronization in L-DACS1 for Aeronautical Communications
L-band Digital Aeronautical Communication System type-1 (L-DACS1) is an
emerging standard that aims at enhancing air traffic management (ATM) by
transitioning the traditional analog aeronautical communication systems to the
superior and highly efficient digital domain. L-DACS1 employs modern and
efficient orthogonal frequency division multiplexing (OFDM) modulation
technique to achieve more efficient and higher data rate in comparison to the
existing aeronautical communication systems. However, the performance of OFDM
systems is very sensitive to synchronization errors. L-DACS1 transmission is in
the L-band aeronautical channels that suffer from large interference and large
Doppler shifts, which makes the synchronization for L-DACS more challenging.
This paper proposes a novel computationally efficient synchronization method
for L-DACS1 systems that offers robust performance. Through simulation, the
proposed method is shown to provide accurate symbol timing offset (STO)
estimation as well as fractional carrier frequency offset (CFO) estimation in a
range of aeronautical channels. In particular, it can yield excellent
synchronization performance in the face of a large carrier frequency offset.Comment: In the proceeding of International Conference on Data Mining,
Communications and Information Technology (DMCIT
MIMO signal processing in offset-QAM based filter bank multicarrier systems
Next-generation communication systems have to comply with very strict requirements for increased flexibility in heterogeneous environments, high spectral efficiency, and agility of carrier aggregation. This fact motivates research in advanced multicarrier modulation (MCM) schemes, such as filter bank-based multicarrier (FBMC) modulation. This paper focuses on the offset quadrature amplitude modulation (OQAM)-based FBMC variant, known as FBMC/OQAM, which presents outstanding spectral efficiency and confinement in a number of channels and applications. Its special nature, however, generates a number of new signal processing challenges that are not present in other MCM schemes, notably, in orthogonal-frequency-division multiplexing (OFDM). In multiple-input multiple-output (MIMO) architectures, which are expected to play a primary role in future communication systems, these challenges are intensified, creating new interesting research problems and calling for new ideas and methods that are adapted to the particularities of the MIMO-FBMC/OQAM system. The goal of this paper is to focus on these signal processing problems and provide a concise yet comprehensive overview of the recent advances in this area. Open problems and associated directions for future research are also discussed.Peer ReviewedPostprint (author's final draft
Overhead-optimization of pilot-based digital signal processing for flexible high spectral efficiency transmission
We present a low-complexity fully pilot-based digital signal processing (DSP) chain designed for high spectral efficiency optical transmission systems. We study the performance of the individual pilot algorithms in simulations before demonstrating transmission of a 51
724 Gbaud PM-64QAM superchannel over distances reaching 1000 km. We present an overhead optimization technique using the system achievable information rate to find the optimal balance between increased performance and throughput reduction from adding additional DSP pilots. Using the optimal overhead of 2.4%, we report 9.3 (8.3) bits/s/Hz spectral efficiency, or equivalently 11.9 (10.6) Tb/s superchannel throughput, after 480 (960) km of transmission over 80 km spans with EDFA-only amplification. Moreover, we show that the optimum overhead depends only weakly on transmission distance, concluding that back-to-back optimization is sufficient for all studied distances. Our results show that pilot-based DSP combined with overhead optimization can increase the robustness and performance of systems using advanced modulation formats while still maintaining state-of-the-art spectral efficiency and multi-Tb/s throughput
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
- …