3,342 research outputs found
On the design of reliable hybrid wired-wireless network-on-chip architectures
With the ever increase in transistor density over technology scaling, energy and performance aware hybrid wire- less Network-on-Chip (WiNoC) has emerged as an alternative solution to the slow conventional wireline NoC design for future System-on-Chip (SoC). However, combining wireless and wireline channels drastically reduces the total reliability of the commu- nication fabric. Besides being lossy, existing feasible wireless solution for WiNoCs, which is in the form of millimeter wave (mm-Wave), relies on free space signal radiation which has high power dissipation with high degradation rate in the signal strength per transmission distance. Alternatively, low power wireless communication fabric in the form of surface wave has been proposed for on-chip communication. With the right design considerations, the reliability and performance benefits of the surface wave channel could be extended. In this paper, we propose a surface wave communication fabric for emerging WiNoCs that is able to match the channel reliability of traditional wireline NoCs. Here, a carefully designed transducer and commercially available thin metal conductor coated with a low cost dielectric material are employed to general surface wave signal to improve the wireless signal transmission gain. Our experimental results demonstrate that, the proposed communication fabric can achieve a 5dB operational bandwidth of about 60GHz around the center frequency (60GHz). By improving the transmission reliability of wireless layer, the proposed communication fabric can improve maximum sustainable load of NoCs by an average of 20.9% and 133.3% compared to existing WiNoCs and wireline NoCs, respectively
On the design of reliable hybrid wired-wireless network-on-chip architectures
With the ever increase in transistor density over technology scaling, energy and performance aware hybrid wire- less Network-on-Chip (WiNoC) has emerged as an alternative solution to the slow conventional wireline NoC design for future System-on-Chip (SoC). However, combining wireless and wireline channels drastically reduces the total reliability of the commu- nication fabric. Besides being lossy, existing feasible wireless solution for WiNoCs, which is in the form of millimeter wave (mm-Wave), relies on free space signal radiation which has high power dissipation with high degradation rate in the signal strength per transmission distance. Alternatively, low power wireless communication fabric in the form of surface wave has been proposed for on-chip communication. With the right design considerations, the reliability and performance benefits of the surface wave channel could be extended. In this paper, we propose a surface wave communication fabric for emerging WiNoCs that is able to match the channel reliability of traditional wireline NoCs. Here, a carefully designed transducer and commercially available thin metal conductor coated with a low cost dielectric material are employed to general surface wave signal to improve the wireless signal transmission gain. Our experimental results demonstrate that, the proposed communication fabric can achieve a 5dB operational bandwidth of about 60GHz around the center frequency (60GHz). By improving the transmission reliability of wireless layer, the proposed communication fabric can improve maximum sustainable load of NoCs by an average of 20.9% and 133.3% compared to existing WiNoCs and wireline NoCs, respectively
Scalability of broadcast performance in wireless network-on-chip
Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version
An improved wireless communication fabric for emerging Network-on-Chip design
Existing wireless communication interface has free space signal radiation which drastically reduces the received signal strength and hence reduces the throughput efficiency of Hybrid Wired-Wireless Network-on-Chip (WiNoC). This paper addresses the issue of throughput degradation by replacing the wireless layer of WiNoCs with a novel Complementary Metal Oxide Semiconductor (CMOS) based waveguide communication fabric that is able compete with the reliability of traditional wired NoCs. A combination of a novel transducer and a commercially available thin metal conductor coated with a low cost Taconic Taclamplus dielectric material is presented to generate surface wave signals with high signal integrity. Our experimental results demonstrate that, the proposed communication fabric can achieve a 5 dB operational bandwidth of about 60 GHz around the center frequency (60 GHz). Compared to existing WiNoCs, the proposed communication fabric a performance improvement of 13.8% and 10.7% in terms of throughput and average packet delay, respectively. Specifically, under realistic traffic patterns, the average packet latency can be reduced by 30% when the mm-Wave is replaced by the proposed communication fabric
Global Congestion and Fault Aware Wireless Interconnection Framework for Multicore Systems
Multicore processors are getting more common in the implementation of all type of computing demands, starting from personal computers to the large server farms for high computational demanding applications. The network-on-chip provides a better alternative to the traditional bus based communication infrastructure for this multicore system. Conventional wire-based NoC interconnect faces constraints due to their long multi-hop latency and high power consumption. Furthermore high traffic generating applications sometimes creates congestion in such system further degrading the systems performance. In this thesis work, a novel two-state congestion aware wireless interconnection framework for network chip is presented. This WiNoC system was designed to able to dynamically redirect traffic to avoid congestion based on network condition information shared among all the core tiles in the system. Hence a novel routing scheme and a two-state MAC protocol is proposed based on a proposed two layer hybrid mesh-based NoC architecture. The underlying mesh network is connected via wired-based interconnect and on top of that a shared wireless interconnect framework is added for single-hop communication. The routing scheme is non-deterministic in nature and utilizes the principles from existing dynamic routing algorithms. The MAC protocol for the wireless interface works in two modes. The first is data mode where a token-based protocol is utilized to transfer core data. And the second mode is the control mode where a broadcast-based communication protocol is used to share the network congestion information. The work details the switching methodology between these two modes and also explain, how the routing scheme utilizes the congestion information (gathered during the control mode) to route data packets during normal operation mode. The proposed work was modeled in a cycle accurate network simulator and its performance were evaluated against traditional NoC and WiNoC designs
Design techniques for low-power systems
Portable products are being used increasingly. Because these systems are battery powered, reducing power consumption is vital. In this report we give the properties of low-power design and techniques to exploit them on the architecture of the system. We focus on: minimizing capacitance, avoiding unnecessary and wasteful activity, and reducing voltage and frequency. We review energy reduction techniques in the architecture and design of a hand-held computer and the wireless communication system including error control, system decomposition, communication and MAC protocols, and low-power short range networks
Recommended from our members
Towards a scalable and reliable wireless network-on-chip
Multi-core platforms are emerging trends in the design of Systems-on-Chip (SoCs). Interconnect fabrics for these multi-core SoCs play a crucial role in achieving the target performance. The Network-on-Chip (NoC) paradigm has been proposed as a promising solution for designing the interconnect fabric of multi-core SoCs. But the performance requirements of NoC infrastructures in future technology nodes cannot be met by relying only on material innovation with traditional scaling. The continuing demand for low power and high speed interconnects with technology scaling necessitates looking beyond the conventional planar metal/dielectric-based interconnect infrastructures. Among different possible alternatives, the on-chip wireless communication network is envisioned as a revolutionary methodology, capable of bringing significant performance gains for multi-core SoCs. Wireless NoCs (WiNoCs) can be designed by using miniaturized on-chip antennas as an enabling technology. In this work, design methodologies and technology requirements for scalable WiNoC architectures are presented and their performance is evaluated. It is demonstrated that WiNoCs outperform their wired counterparts in terms of network throughput and latency, and that energy dissipation improves by orders of magnitude under various experimental and real-life scenarios. A major challenge that NoC design is expected to face is related to the intrinsic unreliability of the interconnect infrastructure under technology limitations. The devices and components of the WiNoCs are expected to suffer high failure rates. By incorporating error control coding (ECC) schemes along the interconnects, NoC architectures will be able to provide correct functionality even in the presence of different sources of transient noise and yet have low energy dissipation. In this work, designs of novel joint crosstalk avoidance and multiple error correction/detection codes as well as burst error correction codes are proposed and their performance is evaluated in different WiNoC fabrics. It is demonstrated that by using the proposed codes WiNoCs can achieve the same reliability as a wireline NoC with much less energy dissipation and higher performance
A resilient 2-D waveguide communication fabric for hybrid wired-wireless NoC design
Hybrid wired-wireless Network-on-Chip (WiNoC) has emerged as an alternative solution to the poor scalability and performance issues of conventional wireline NoC design for future System-on-Chip (SoC). Existing feasible wireless solution for WiNoCs in the form of millimeter wave (mm-Wave) relies on free space signal radiation which has high power dissipation with high degradation rate in the signal strength per transmission distance. Moreover, over the lossy wireless medium, combining wireless and wireline channels drastically reduces the total reliability of the communication fabric. Surface wave has been proposed as an alternative wireless technology for low power on-chip communication. With the right design considerations, the reliability and performance benefits of the surface wave channel could be extended. In this paper, we propose a surface wave communication fabric for emerging WiNoCs that is able to match the reliability of traditional wireline NoCs. First, we propose a realistic channel model which demonstrates that existing mm-Wave WiNoCs suffers from not only free-space spreading loss (FSSL) but also molecular absorption attenuation (MAA), especially at high frequency band, which reduces the reliability of the system. Consequently, we employ a carefully designed transducer and commercially available thin metal conductor coated with a low cost dielectric material to generate surface wave signals with improved transmission gain. Our experimental results demonstrate that the proposed communication fabric can achieve a 5dB operational bandwidth of about 60GHz around the center frequency (60GHz). By improving the transmission reliability of wireless layer, the proposed communication fabric can improve maximum sustainable load of NoCs by an average of 20.9% and 133.3% compared to existing WiNoCs and wireline NoCs, respectively
OrthoNoC: a broadcast-oriented dual-plane wireless network-on-chip architecture
© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksOn-chip communication remains as a key research issue at the gates of the manycore era. In response to this, novel interconnect technologies have opened the door to new Network-on-Chip (NoC) solutions towards greater scalability and architectural flexibility. Particularly, wireless on-chip communication has garnered considerable attention due to its inherent broadcast capabilities, low latency, and system-level simplicity. This work presents ORTHONOC, a wired-wireless architecture that differs from existing proposals in that both network planes are decoupled and driven by traffic steering policies enforced at the network interfaces. With these and other design decisions, ORTHONOC seeks to emphasize the ordered broadcast advantage offered by the wireless technology. The performance and cost of ORTHONOC are first explored using synthetic traffic, showing substantial improvements with respect to other wired-wireless designs with a similar number of antennas. Then, the applicability of ORTHONOC in the multiprocessor scenario is demonstrated through the evaluation of a simple architecture that implements fast synchronization via ordered broadcast transmissions. Simulations reveal significant execution time speedups and communication energy savings for 64-threaded benchmarks, proving that the value of ORTHONOC goes beyond simply improving the performance of the on-chip interconnect.Peer ReviewedPostprint (author's final draft
A Resilient 2-D Waveguide Communication Fabric for Hybrid Wired-Wireless NoC Design
Hybrid wired-wireless Network-on-Chip (WiNoC) has emerged as an alternative solution to the poor scalability and performance issues of conventional wireline NoC design for future System-on-Chip (SoC). Existing feasible wireless solution for WiNoCs in the form of millimeter wave (mm-Wave) relies on free space signal radiation which has high power dissipation with high degradation rate in the signal strength per transmission distance. Moreover, over the lossy wireless medium, combining wireless and wireline channels drastically reduces the total reliability of the communication fabric. Surface wave has been proposed as an alternative wireless technology for low power on-chip communication. With the right design considerations, the reliability and performance benefits of the surface wave channel could be extended. In this paper, we propose a surface wave communication fabric for emerging WiNoCs that is able to match the reliability of traditional wireline NoCs. First, we propose a realistic channel model which demonstrates that existing mm-Wave WiNoCs suffers from not only free-space spreading loss (FSSL) but also molecular absorption attenuation (MAA), especially at high frequency band, which reduces the reliability of the system. Consequently, we employ a carefully designed transducer and commercially available thin metal conductor coated with a low cost dielectric material to generate surface wave signals with improved transmission gain. Our experimental results demonstrate that the proposed communication fabric can achieve a 5dB operational bandwidth of about 60GHz around the center frequency (60GHz). By improving the transmission reliability of wireless layer, the proposed communication fabric can improve maximum sustainable load of NoCs by an average of 20:9% and 133:3% compared to existing WiNoCs and wireline NoCs, respectively
- âŠ