Fault-Independent Test-Generation for Software-Based Self-Testing

Software-based self-test (SBST) is being widely used in both manufacturing and in-the-field testing of processor-based devices and Systems-on-Chips. Unfortunately, the stuck-at fault model is increasingly inadequate to match the new and different types of defects in the most recent semiconductor technologies, while the explicit and separate targeting of every fault model in SBST is cumbersome due to the high complexity of the test-generation process, the lack of automation tools, and the high CPU-intensity of the fault-simulation process. Moreover, defects in advanced semiconductor technologies are not always covered by the most commonly used fault-models, and the probability of defect-escapes increases even more. To overcome these shortcomings we propose the first fault-independent SBST method. The proposed method is almost fully automated, it offers high coverage of non-modeled faults by means of a novel SBST-oriented probabilistic metric, and it is very fast as it omits the time-consuming test-generation/fault-simulation processes. Extensive experiments on the OpenRISC OR1200 processor show the advantages of the proposed method

Fault-Independent Test-Generation for Software-Based Self-Testing

Software-based self-test (SBST) is being widely used in both manufacturing and in-the-field testing of processor-based devices and Systems-on-Chips. Unfortunately, the stuck-at fault model is increasingly inadequate to match the new and different types of defects in the most recent semiconductor technologies, while the explicit and separate targeting of every fault model in SBST is cumbersome due to the high complexity of the test-generation process, the lack of automation tools, and the high CPU-intensity of the fault-simulation process. Moreover, defects in advanced semiconductor technologies are not always covered by the most commonly used fault-models, and the probability of defect-escapes increases even more. To overcome these shortcomings we propose the first fault-independent SBST method. The proposed method is almost fully automated, it offers high coverage of non-modeled faults by means of a novel SBST-oriented probabilistic metric, and it is very fast as it omits the time-consuming test-generation/fault-simulation processes. Extensive experiments on the OpenRISC OR1200 processor show the advantages of the proposed method

A Flexible Framework for the Automatic Generation of SBST Programs

Software-based self-test (SBST) techniques are used to test processors and processor cores against permanent faults introduced by the manufacturing process or to perform in-field test in safety-critical applications. However, the generation of an SBST program is usually associated with high costs as it requires significant manual effort of a skilled engineer with in-depth knowledge about the processor under test. In this paper, we propose an approach for the automatic generation of SBST programs. First, we detail an automatic test pattern generation (ATPG) framework for the generation of functional test sequences. Second, we describe the extension of this framework with the concept of a validity checker module (VCM), which allows the specification of constraints with regard to the generated sequences. Third, we use the VCM to express typical constraints that exist when SBST is adopted for in-field test. In our experimental results, we evaluate the proposed approach with a microprocessor without interlocked pipeline stages (MIPS)-like microprocessor. The results show that the proposed method is the first approach able to automatically generate SBST programs for both end-of-manufacturing and in-field test whose fault efficiency is superior to those produced by state-of-the-art manual approaches

Fault-Independent Test-Generation for Software-Based Self-Testing

Software-based self-test (SBST) is being widely used in both manufacturing and in-the-field testing of processor-based devices and Systems-on-Chips. Unfortunately, the stuck-at fault model is increasingly inadequate to match the new and different types of defects in the most recent semiconductor technologies, while the explicit and separate targeting of every fault model in SBST is cumbersome due to the high complexity of the test-generation process, the lack of automation tools, and the high CPU-intensity of the fault-simulation process. Moreover, defects in advanced semiconductor technologies are not always covered by the most commonly used fault-models, and the probability of defect-escapes increases even more. To overcome these shortcomings we propose the first fault-independent method for generating software-based self-test procedures. The proposed method is almost fully automated, it offers high coverage of non- modeled faults by means of a novel SBST-oriented probabilistic metric, and it is very fast as it omits the time-consuming test- generation/fault-simulation processes. Extensive experiments on the OpenRISC OR1200 processor show the advantages of the proposed method

Exploring the Mysteries of System-Level Test

System-level test, or SLT, is an increasingly important process step in today's integrated circuit testing flows. Broadly speaking, SLT aims at executing functional workloads in operational modes. In this paper, we consolidate available knowledge about what SLT is precisely and why it is used despite its considerable costs and complexities. We discuss the types or failures covered by SLT, and outline approaches to quality assessment, test generation and root-cause diagnosis in the context of SLT. Observing that the theoretical understanding for all these questions has not yet reached the level of maturity of the more conventional structural and functional test methods, we outline new and promising directions for methodical developments leveraging on recent findings from software engineering.Comment: 7 pages, 2 figure

Functional Testing of Processor Cores in FPGA-Based Applications

Embedded processor cores, which are widely used in SRAM-based FPGA applications, are candidates for SEU (Single Event Upset)-induced faults and need to be tested occasionally during system exploitation. Verifying a processor core is a difficult task, due to its complexity and the lack of user knowledge about the core-implementation details. In user applications, processor cores are normally tested by executing some kind of functional test in which the individual processor's instructions are tested with a set of deterministic test patterns, and the results are then compared with the stored reference values. For practical reasons the number of test patterns and corresponding results is usually small, which inherently leads to low fault coverage. In this paper we develop a concept that combines the whole instruction-set test into a compact test sequence, which can then be repeated with different input test patterns. This improves the fault coverage considerably with no additional memory requirements

Software Canaries: Software-based Path Delay Fault Testing for Variation-aware Energy-efficient Design

ABSTRACT Software-based path delay fault testing (SPDFT) has been used to identify faulty chips that cannot meet timing constraints due to gross delay defects. In this paper, we propose using SPDFT for a new purpose -aggressively selecting the operating point of a variation-affected design. In order to use SPDFT for this purpose, test routines must provide high coverage of potentially-critical paths and must have low dynamic performance overhead. We describe how to apply SPDFT for selecting an energy-efficient operating point for a variation-affected processor and demonstrate that our test routines achieve ample coverage and low overhead

Towards an embedded board-level tester: study of a configurable test processor

The demand for electronic systems with more features, higher performance, and less power consumption increases continuously. This is a real challenge for design and test engineers because they have to deal with electronic systems with ever-increasing complexity maintaining production and test costs low and meeting critical time to market deadlines. For a test engineer working at the board-level, this means that manufacturing defects must be detected as soon as possible and at a low cost. However, the use of classical test techniques for testing modern printed circuit boards is not sufficient, and in the worst case these techniques cannot be used at all. This is mainly due to modern packaging technologies, a high device density, and high operation frequencies of modern printed circuit boards. This leads to very long test times, low fault coverage, and high test costs. This dissertation addresses these issues and proposes an FPGA-based test approach for printed circuit boards. The concept is based on a configurable test processor that is temporarily implemented in the on-board FPGA and provides the corresponding mechanisms to communicate to external test equipment and co-processors implemented in the FPGA. This embedded test approach provides the flexibility to implement test functions either in the external test equipment or in the FPGA. In this manner, tests are executed at-speed increasing the fault coverage, test times are reduced, and the test system can be adapted automatically to the properties of the FPGA and devices located on the board. An essential part of the FPGA-based test approach deals with the development of a test processor. In this dissertation the required properties of the processor are discussed, and it is shown that the adaptation to the specific test scenario plays a very important role for the optimization. For this purpose, the test processor is equipped with configuration parameters at the instruction set architecture and microarchitecture level. Additionally, an automatic generation process for the test system and for the computation of some of the processor’s configuration parameters is proposed. The automatic generation process uses as input a model known as the device under test model (DUT-M). In order to evaluate the entire FPGA-based test approach and the viability of a processor for testing printed circuit boards, the developed test system is used to test interconnections to two different devices: a static random memory (SRAM) and a liquid crystal display (LCD). Experiments were conducted in order to determine the resource utilization of the processor and FPGA-based test system and to measure test time when different test functions are implemented in the external test equipment or the FPGA. It has been shown that the introduced approach is suitable to test printed circuit boards and that the test processor represents a realistic alternative for testing at board-level.Der Bedarf an elektronischen Systemen mit zusätzlichen Merkmalen, höherer Leistung und geringerem Energieverbrauch nimmt ständig zu. Dies stellt eine erhebliche Herausforderung für Entwicklungs- und Testingenieure dar, weil sie sich mit elektronischen Systemen mit einer steigenden Komplexität zu befassen haben. Außerdem müssen die Herstellungs- und Testkosten gering bleiben und die Produkteinführungsfristen so kurz wie möglich gehalten werden. Daraus folgt, dass ein Testingenieur, der auf Leiterplatten-Ebene arbeitet, die Herstellungsfehler so früh wie möglich entdecken und dabei möglichst niedrige Kosten verursachen soll. Allerdings sind die klassischen Testmethoden nicht in der Lage, die Anforderungen von modernen Leiterplatten zu erfüllen und im schlimmsten Fall können diese Testmethoden überhaupt nicht verwendet werden. Dies liegt vor allem an modernen Gehäuse-Technologien, der hohen Bauteildichte und den hohen Arbeitsfrequenzen von modernen Leiterplatten. Das führt zu sehr langen Testzeiten, geringer Testabdeckung und hohen Testkosten. Die Dissertation greift diese Problematik auf und liefert einen FPGA-basierten Testansatz für Leiterplatten. Das Konzept beruht auf einem konfigurierbaren Testprozessor, welcher im On-Board-FPGA temporär implementiert wird und die entsprechenden Mechanismen für die Kommunikation mit der externen Testeinrichtung und Co-Prozessoren im FPGA bereitstellt. Dadurch ist es möglich Testfunktionen flexibel entweder auf der externen Testeinrichtung oder auf dem FPGA zu implementieren. Auf diese Weise werden Tests at-speed ausgeführt, um die Testabdeckung zu erhöhen. Außerdem wird die Testzeit verkürzt und das Testsystem automatisch an die Eigenschaften des FPGAs und anderer Bauteile auf der Leiterplatte angepasst. Ein wesentlicher Teil des FPGA-basierten Testansatzes umfasst die Entwicklung eines Testprozessors. In dieser Dissertation wird über die benötigten Eigenschaften des Prozessors diskutiert und es wird gezeigt, dass die Anpassung des Prozessors an den spezifischen Testfall von großer Bedeutung für die Optimierung ist. Zu diesem Zweck wird der Prozessor mit Konfigurationsparametern auf der Befehlssatzarchitektur-Ebene und Mikroarchitektur-Ebene ausgerüstet. Außerdem wird ein automatischer Generierungsprozess für die Realisierung des Testsystems und für die Berechnung einer Untergruppe von Konfigurationsparametern des Prozessors vorgestellt. Der automatische Generierungsprozess benutzt als Eingangsinformation ein Modell des Prüflings (device under test model, DUT-M). Das entwickelte Testsystem wurde zum Testen von Leiterplatten für Verbindungen zwischen dem FPGA und zwei Bauteilen verwendet, um den FPGA-basierten Testansatz und die Durchführbarkeit des Testprozessors für das Testen auf Leiterplatte-Ebene zu evaluieren. Die zwei Bauteile sind ein Speicher mit direktem Zugriff (static random-access memory, SRAM) und eine Flüssigkristallanzeige (liquid crystal display, LCD). Die Experimente wurden durchgeführt, um den Ressourcenverbrauch des Prozessors und Testsystems festzustellen und um die Testzeit zu messen. Dies geschah durch die Implementierung von unterschiedlichen Testfunktionen auf der externen Testeinrichtung und dem FPGA. Dadurch konnte gezeigt werden, dass der FPGA-basierte Ansatz für das Testen von Leiterplatten geeignet ist und dass der Testprozessor eine realistische Alternative für das Testen auf Leiterplatten-Ebene ist