302 research outputs found
Medium-transparent MAC protocols for converged optical wireless networks
In order to address the explosive demand for high-capacity and omnipresent wireless access, modern cell-based wireless networks are slowly adopting two major solution roadmaps. The first is the employment of small-cell formations in order to increase the overall spectral efficiency, whereas the second is the employment of higher frequency bands, such as the mm-wave 60GHz band, that offers vast amounts of bandwidth. Depending on the specific application, the above solutions inevitably require the installation and operational management of large amounts of Base Stations (BSs) or Access Points (APs), which ultimately diminishes the overall cost-effectiveness of the architecture. In order to reduce the system cost, Radio over Fiber (RoF) technology has been put forward as an ideal candidate solution, due to the fact that it provides functionally simple antenna units, often termed as Remote Antenna Units (RAUs) that are interconnected to a central managing entity, termed as the Central Office (CO), via an optical fiber. Although extensive research efforts have been dedicated to the development of the physical layer aspects regarding RoF technologies, such as CO/RAU physical layer design and radio signal transport techniques over fiber, very limited efforts have con-centrated on upper layer and resource management issues. In this dissertation, we are concerned with access control and resource management of RoF-based mm-wave network architectures targeting the exploitation of the dual medium and its centralized control properties in order to perform optimal optical/wireless/time resource allocation. In this dissertation, we propose a Medium-Transparent MAC (MT-MAC) protocol that concurrently administers the optical and wireless resources of a 60GHz RoF based network, seamlessly connecting the CO to the wireless terminals through minimal RAU intervention. In this way, the MT-MAC protocol forms extended reach 60GHz WLAN networks offering connectivity amongst wireless devices that are attached to the same or different RAUs under both Line of Sight (LOS) and non LOS conditions. The notion of medium-transparency relies on two parallel contention periods, the first in the optical domain and the second in the wireless frequency and time domains, with nested dataframe structures. The MT-MAC operation is based on a proposed RAU design that allows for wavelength selectivity functions, thus being compatible with completely passive optical distribution network implementations that are predominately used by telecom operators today. Two variants of the MT-MAC protocol are considered. The first offers dynamic wavelength allocation with fixed time windows, whereas the second targets fairness-sensitive applications by offering dynamic wavelength allocation with dynamic transmission opportunity window sizes, based on the number of active clients connected at each RAU. Both variants of the protocol are evaluated by both simulation and analytical means. For the latter part, this thesis introduces two analytical models for calculating saturation throughput and non-saturation packet delay for the converged MT-MAC protocol. Finally, this thesis presents an extensive study regarding the network planning and formation of 60GHz Gigabit WLAN networks when the latter are deployed over existing Passive Optical Network (PON) infrastructures. Three possible architectures where studied: i) the RoF approach, ii) the Radio & Fiber approach and iii) the hybrid RoF-plus-R&F approach that combines the properties of both the aforementioned architectures. During the elaboration of this thesis, one major key conclusion has been extracted. The work proposed in this thesis considers that there is a fundamental requirement for implementing new converged optical/wireless MAC protocols, that have the complete overview of both available resources in order to effectively administer the hybrid Radio-over-Fiber networks.A fin de atender la demanda explosiva de alta capacidad y acceso inalámbrico omnipresente, las redes inalámbricas basadas en celdas están poco a poco adoptando dos principales guías de solución. La primera es el empleo de formaciones de celdas pequeñas con el fin de aumentar la eficiencia espectral global, mientras que la segunda es el empleo de bandas de frecuencia superior, como la banda de 60GHz, la cual ofrece una gran cantidad de ancho de banda. Dependiendo de la aplicación en específico, las soluciones anteriores inevitable-mente requieren de una instalación y una gestión operativa de grandes cantidades de Estaciones Base o Puntos de Acceso, que en última instancia disminuye la rentabilidad de la arquitectura. Para reducir el coste, la tecnología radioeléctrica por fibra (RoF) se presenta como una solución ideal debido al hecho de que proporciona unidades de antenas de sim-ple funcionamiento, a menudo denominadas Unidades de Antenas Remotas (RAUs), las cuales están interconectadas a una entidad central de gestión, denominada Oficina Central (CO), a través de la fibra óptica. A pesar de que se han dedicado muchos esfuerzos de investigación al desarrollo de varios aspectos de las capas física con respecto a las tecnologías RoF, muy pocos esfuerzos se han concentrado en la capa superior y cuestiones de gestión de recursos.
En esta tesis, nos enfocando en el control de acceso y gestión de recursos de arquitecturas RoF y comunicaciones milimétricas, con el fin de aprovechar y explotar el medio dual y las propiedades para realizar una óptima asignación de los recursos ópticos, inalámbricos y temporales. Nosotros proponemos un protocolo Transparente al Medio MAC (MT-MAC) que simultáneamente administre los recursos ópticos e inalámbricos de una red RoF a 60GHz, conectando a la perfección el CO a los terminales inalámbricos a través de una mínima intervención RAU. El protocolo MT-MAC forma unas redes WLAN 60GHz de alcance extendido, ofreciendo así conectividad entre los dispositivos inalámbricos que están conectados al mismo o diferentes RAUs bajo con o sin Línea de Vista (condiciones LOS o NLOS) respectivamente. La noción de transparencia al medio se basa en dos períodos de contención para-lelos, el primero en el dominio óptico y el segundo en la frecuencia inalámbrica y dominio del tiempo, con estructuras de datos anidados. La operación MT-MAC se basa en proponer un diseño RAU que permita la selectividad de funciones de longitud de onda. Dos variantes del protocolo MT- MAC son considerados; el primer ofrece asignación de longitud de onda dinámica con ventanas de tiempo fijo, mientras que la segunda tiene como objetivo entornos de aplicaciones sensibles ofreciendo asignación de longitud de onda con tamaño de ventana de oportunidad de transmisión dinámico, basado en el número de clientes conectados en cada RAU. Ambas variantes del protocolo están evaluadas tanto por medios analíticos como de simulación. En la segunda parte, esta tesis introduce dos modelos analíticos para calcular el rendimiento de saturación y no saturación del retardo de paquetes para el protocolo MT-MAC convergente. Finalmente, esta tesis presenta un extenso estudio de la planificación de red y la formación de redes 60GHz Gigabit WLAN cuando esta se encuentra desplegada sobre las ya existente infraestructuras de Redes Ópticas Pasivas (PONs). Tres posibles arquitecturas han sido estudiadas: i) el enfoque RoF, ii) el enfoque Radio y Fibra , y iii) el enfoque híbrido, RoF más R&F el cual combina las propiedades de ambas arquitecturas anteriormente mencionadas. Durante la elaboración de esta tesis, se ha extraído una importante conclusión: hay un requerimiento fundamental para implementar nuevos protocolos ópticos/inalámbricos convergentes, que tengan una completa visión de ambos recursos disponibles para poder administrar efectivamente las redes de tecnología RoF.Postprint (published version
Integration of Hybrid Passive Optical Networks (PON) with Radio over Fiber (RoF)
A cost effective, robust, and high capacity access network necessitated to meet the mounting customer demands for bandwidth-desirous services. A remarkable evolution of access networks is observed both in wired and wireless, predominantly driven by ever-changing bandwidth requirements. A wireless connection releases the end user from the restrictions of a physical link to a network that results in mobility, flexibleness, and ease of use. Whereas, optical networks offer immense amount of bandwidth that appease the most bandwidth voracious customers compared to bandwidth limited wireless networks. The integration of wired and wireless domains in the access landscape that presents a technical analysis of optical architectures suitable to support radio over fiber (RoF) is the objective of this chapter. Investigate the main trends that drive the merger of fiber and wireless technologies in access networks. Moreover, study the primary terms and the particular transmission features of integrated fiber-radio links to form a well-defined classification of hybrid systems and techniques. This work also recognizes the major problems for realization of RoF systems and examines the limitation, advantages, and diversity of integrated RoF-PON technology
Recommended from our members
Application priority framework for fixed mobile converged communication networks
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The current prospects in wired and wireless access networks, it is becoming increasingly important to address potential convergence in order to offer integrated broadband services. These systems will need to offer higher data transmission capacities and long battery life, which is the catalyst for an everincreasing variety of air interface technologies targeting local area to wide area connectivity. Current integrated industrial networks do not offer application aware context delivery and enhanced services for optimised networks. Application aware services provide value-added functionality to business applications by capturing, integrating, and consolidating intelligence about users and their endpoint devices from various points in the network. This thesis mainly intends to resolve the issues related to ubiquitous application aware service, fair allocation of radio access, reduced energy consumption and improved capacity. A technique that measures and evaluates the data rate demand to reduce application response time and queuing delay for multi radio interfaces is proposed. The technique overcomes the challenges of network integration, requiring no user intervention, saving battery life and selecting the radio access connection for the application requested by the end user. This study is split in two parts. The first contribution identifies some constraints of the services towards the application layer in terms of e.g. data rate and signal strength. The objectives are achieved by application controlled handover (ACH) mechanism in order to maintain acceptable data rate for real-time application services. It also looks into the impact of the radio link on the application and identifies elements and parameters like wireless link quality and handover that will influence the application type. It also identifies some enhanced traditional mechanisms such as distance controlled multihop and mesh topology required in order to support energy efficient multimedia applications. The second contribution unfolds an intelligent application priority assignment mechanism (IAPAM) for medical applications using wireless sensor networks. IAPAM proposes and evaluates a technique based on prioritising multiple virtual queues for the critical nature of medical data to improve instant transmission. Various mobility patterns (directed, controlled and random waypoint) has been investigated and compared by simulating IAPAM enabled mobile BWSN. The following topics have been studied, modelled, simulated and discussed in this thesis: 1. Application Controlled Handover (ACH) for multi radios over fibre 2. Power Controlled Scheme for mesh multi radios over fibre using ACH 3. IAPAM for Biomedical Wireless Sensor Networks (BWSN) and impact of mobility over IAPAM enabled BWSN. Extensive simulation studies are performed to analyze and to evaluate the proposed techniques. Simulation results demonstrate significant improvements in multi radios over fibre performance in terms of application response delay and power consumption by upto 75% and 15 % respectively, reduction in traffic loss by upto 53% and reduction in delay for real time application by more than 25% in some cases
Radio over fiber broadband access networks architectures based on wavelength division multiplexing techniques
The recent remarkable growth in bandwidth of both wired optical and wireless access
networks supports a burst of new high bandwidth Internet applications such as: peer-topeer
file sharing, cloud storage, on-line gaming, video streaming, etc. Within this
scenario, the convergence of fixed and wireless access networks offers significant
opportunities for network operators to satisfy user demands, and simultaneously reduce
the cost of implementing and running separated wireless and wired networks.
The integration of wired and wireless network can be accomplished within several
scenarios and at several levels. In this thesis we will focus on converged radio over fiber
architectures, particularly on two application scenarios: converged optical 60 GHz
wireless networks and wireless overlay backhauling over bidirectional colorless
wavelength division multiplexing passive optical networks (WDM-PONs).
In the first application scenario, optical 60 GHz signal generation using external
modulation of an optical carrier by means of lithium niobate (LiNbO3) Mach- Zehnder
modulators (MZM) is considered. The performance of different optical modulation
techniques, robust against fiber dispersion is assessed and dispersion mitigation strategies
are identified. The study is extended to 60 GHz carriers digitally modulated with data and
to systems employing subcarrier multiplexed (SCM) mm-wave channels.
In the second application scenario, the performance of WDM-PONs employing
reflective semiconductor optical amplifiers (RSOAs), transmitting an overlay orthogonal
frequency-division multiplexing (OFDM) wireless signal is assessed analytically and
experimentally, with the relevant system impairments being identified. It is demonstrated
that the intermodulation due to the beating of the baseband signal and wireless signal at
the receiver can seriously impair the wireless channel. Performance degradation of the
wireless channel caused by the RSOA gain modulation owing to the downstream
baseband data is also assessed, and system design guidelines are provided.Universidade do Algarve, Faculdade de Ciências e Tecnologi
Radio over fiber broadband access networks architectures based on wavelength division multiplexing techniques
The recent remarkable growth in bandwidth of both wired optical and wireless access
networks supports a burst of new high bandwidth Internet applications such as: peer-topeer
file sharing, cloud storage, on-line gaming, video streaming, etc. Within this
scenario, the convergence of fixed and wireless access networks offers significant
opportunities for network operators to satisfy user demands, and simultaneously reduce
the cost of implementing and running separated wireless and wired networks.
The integration of wired and wireless network can be accomplished within several
scenarios and at several levels. In this thesis we will focus on converged radio over fiber
architectures, particularly on two application scenarios: converged optical 60 GHz
wireless networks and wireless overlay backhauling over bidirectional colorless
wavelength division multiplexing passive optical networks (WDM-PONs).
In the first application scenario, optical 60 GHz signal generation using external
modulation of an optical carrier by means of lithium niobate (LiNbO3) Mach- Zehnder
modulators (MZM) is considered. The performance of different optical modulation
techniques, robust against fiber dispersion is assessed and dispersion mitigation strategies
are identified. The study is extended to 60 GHz carriers digitally modulated with data and
to systems employing subcarrier multiplexed (SCM) mm-wave channels.
In the second application scenario, the performance of WDM-PONs employing
reflective semiconductor optical amplifiers (RSOAs), transmitting an overlay orthogonal
frequency-division multiplexing (OFDM) wireless signal is assessed analytically and
experimentally, with the relevant system impairments being identified. It is demonstrated
that the intermodulation due to the beating of the baseband signal and wireless signal at
the receiver can seriously impair the wireless channel. Performance degradation of the
wireless channel caused by the RSOA gain modulation owing to the downstream
baseband data is also assessed, and system design guidelines are provided.Universidade do Algarve, Faculdade de Ciências e Tecnologi
A Review on Provisioning Quality of Service of Wireless Telemedicine for E-Health Services
In general, on-line medical consultation reduces time required for medical consultation induces
improvement in the quality and efficiency of healthcare services. All major types of current e-health applications such as ECG, X-ray, video, diagnosis images and other common applications have been included in the scope of the study. In addition, the provision of Quality of Service (QoS) for the application of specific healthcare services in e-health, the scheme of priority for e-health services and the support of QoS in wireless networks and techniques or methods for IEEE 802.11 to guarantee the provision of QoS has also been assessed.
In e-health, medical services in remote locations such as rural healthcare centers, ambulances, ships as well as
home healthcare services can be supported through the applications of e-health services such as medical
databases, electronic health records and the routing of text, audio, video and images. Given this, an adaptive
resource allocation for a wireless network with multiple service types and multiple priorities have been
proposed. For the provision of an acceptable QoS level to users of e-health services, prioritization is an
important criterion in a multi-traffic network. The requirement for QoS provisioning in wireless broadband
medical networks have paved the pathway for bandwidth requirements and the real-time or live transmission
of medical applications. From the study, good performance of the proposed scheme has been validated by the
results obtained. The proposed wireless network is capable of handling medical applications for both normal
and life-threatening conditions as characterized by the level of emergencies. In addition, the bandwidth
allocation and admission control algorithm for IEEE 802.16- based design specifically for wireless
telemedicine/e-health services have also been presented in the study. It has been concluded that under busy
traffic conditions, the proposed architecture can used as a feasible and reliable infrastructure network for
telemedicine
White Paper for Research Beyond 5G
The documents considers both research in the scope of evolutions of the 5G systems (for the period around 2025) and some alternative/longer term views (with later outcomes, or leading to substantial different design choices). This document reflects on four main system areas: fundamental theory and technology, radio and spectrum management; system design; and alternative concepts. The result of this exercise can be broken in two different strands: one focused in the evolution of technologies that are already ongoing development for 5G systems, but that will remain research areas in the future (with “more challenging” requirements and specifications); the other, highlighting technologies that are not really considered for deployment today, or that will be essential for addressing problems that are currently non-existing, but will become apparent when 5G systems begin their widespread deployment
- …