A traffic engineering system for DiffServ/MPLS networks

This thesis presents an approach to traffic engineering that uses DiffServ and MPLS technologies to provide QoS guarantees over an IP network. The specific problem described here is how best to route traffic within the network such that the demands can be carried with the requisite QoS while balancing the load on the network. A traffic engineering algorithm that determines QoS guaranteed label-switched paths (LSPs) between specified ingress-egress pairs is proposed and a system that uses such an algorithm is outlined. The algorithm generates a solution for the QoS routing problem of finding a path with a number of constraints (delay, jitter, loss) while trying to make best of resource utilisation. The key component of the system is a central resource manager responsible for monitoring and managing resources within the network and making all decisions to route traffic according to QoS requirements. The algorithm for determining QoS-constrained routes is based on the notion of effective bandwidth and cost functions for load balancing. The network simulation of the proposed system is presented here and simulation results are discussed

SCOR: Software-defined Constrained Optimal Routing Platform for SDN

A Software-defined Constrained Optimal Routing (SCOR) platform is introduced as a Northbound interface in SDN architecture. It is based on constraint programming techniques and is implemented in MiniZinc modelling language. Using constraint programming techniques in this Northbound interface has created an efficient tool for implementing complex Quality of Service routing applications in a few lines of code. The code includes only the problem statement and the solution is found by a general solver program. A routing framework is introduced based on SDN's architecture model which uses SCOR as its Northbound interface and an upper layer of applications implemented in SCOR. Performance of a few implemented routing applications are evaluated in different network topologies, network sizes and various number of concurrent flows.Comment: 19 pages, 11 figures, 11 algorithms, 3 table

Auto-bandwidth control in dynamically reconfigured hybrid-SDN MPLS networks

The proposition of this work is based on the steady evolution of bandwidth demanding technology, which currently and more so in future, requires operators to use expensive infrastructure capability smartly to maximise its use in a very competitive environment. In this thesis, a traffic engineering control loop is proposed that dynamically adjusts the bandwidth and route of flows of Multi-Protocol Label Switching (MPLS) tunnels in response to changes in traffic demand. Available bandwidth is shifted to where the demand is, and where the demand requirement has dropped, unused allocated bandwidth is returned to the network. An MPLS network enhanced with Software-defined Networking (SDN) features is implemented. The technology known as hybrid SDN combines the programmability features of SDN with the robust MPLS label switched path features along with traffic engineering enhancements introduced by routing protocols such as Border Gateway Patrol-Traffic Engineering (BGP-TE) and Open Shortest Path First-Traffic Engineering (OSPF-TE). The implemented mixed-integer linear programming formulation using the minimisation of maximum link utilisation and minimum link cost objective functions, combined with the programmability of the hybrid SDN network allows for source to destination demand fluctuations. A key driver to this research is the programmability of the MPLS network, enhanced by the contributions that the SDN controller technology introduced. The centralised view of the network provides the network state information needed to drive the mathematical modelling of the network. The path computation element further enables control of the label switched path's bandwidths, which is adjusted based on current demand and optimisation method used. The hose model is used to specify a range of traffic conditions. The most important benefit of the hose model is the flexibility that is allowed in how the traffic matrix can change if the aggregate traffic demand does not exceed the hose maximum bandwidth specification. To this end, reserved hose bandwidth can now be released to the core network to service demands from other sites

Dynamic bandwidth allocation in multi-class IP networks using utility functions.

PhDAbstact not availableFujitsu Telecommunications Europe Lt

Adaptive management of an active services network

The benefits of active services and networks cannot be realised unless the associated increase in system complexity can be efficiently managed. An adaptive management solution is required. Simulation results show that a distributed genetic algorithm, inspired by observations of bacterial communities, can offer many key management functions. The algorithm is fast and efficient, even when the demand for network services is rapidly varying

On the feasibility of using current data centre infrastructure for latency-sensitive applications

It has been claimed that the deployment of fog and edge computing infrastructure is a necessity to make high-performance cloud-based applications a possibility. However, there are a large number of middle-ground latency-sensitive applications such as online gaming, interactive photo editing and multimedia conferencing that require servers deployed closer to users than in globally centralised clouds but do not necessarily need the extreme low-latency provided by a new infrastructure of micro data centres located at the network edge, e.g., in base stations and ISP Points of Presence. In this paper we analyse a snapshot of today's data centres and the distribution of users around the globe and conclude that existing infrastructure provides a sufficiently distributed platform for middle-ground applications requiring a response time of $20\hbox{-}200$20-200 ms. However, while placement and selection of edge servers for extreme low-latency applications is a relatively straightforward matter of choosing the closest, providing a high quality of experience for middle-ground latency applications that use the more widespread distribution of today's data centres, as we advocate in this paper, raises new management challenges to develop algorithms for optimising the placement of and the per-request selection between replicated service instances

A Survey on the Contributions of Software-Defined Networking to Traffic Engineering

Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567 Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-

Congestion removal in the next generation internet

The ongoing development of new and demanding Internet applications requires the Internet to deliver better service levels that are significantly better than the best effort service that the Internet currently provides and was built for. These improved service levels include guaranteed delays, jitter and bandwidth. Through extensive research into Quality of Service and Differentiated Service (DiffServ) it has become possible to provide guaranteed services, however this turns out to be inadequate without the application of Traffic Engineering methodologies and principles. Traffic Engineering is an integral part of network operation. Its major goal is to deliver the best performance from an existing service provider's network resources and, at the same time, to enhance a customers' view of network performance. In this thesis, several different traffic engineering methods for optimising the operation of native IP and IP networks employing MPLS are proposed. A feature of these new methods is their fast run times and this opens the way to making them suitable for application in an online traffic engineering environment. For native IP networks running shortest path based routing protocols, we show that an LP-based optimisation based on the well known multi-commodity flow problem can be effective in removing network congestion. Having realised that Internet service providers are now moving towards migrating their networks to the use of MPLS, we have also formulated optimisation methods to traffic engineer MPLS networks by selecting suitable routing paths and utilising the feature of explicit routing contained in MPLS. Although MPLS is capable of delivering traffic engineering across different classes of traffic, network operators still prefer to rely on the proven and simple IP based routing protocols for best effort traffic and only use MPLS to route traffic requiring special forwarding treatment. Based on this fact, we propose a method that optimises the routing patterns applicable to different classes of traffic based on their bandwidth requirements. A traffic engineering comparison study that evaluates the performance of a neural network-based method for MPLS networks and LP-based weight setting approach for shortest path based networks has been performed using a well-known open source network simulator, called ns2. The comparative evaluation is based upon the packet loss probability. The final chapter of the thesis describes the software development of a network management application called OptiFlow which integrates techniques described in earlier chapters including the LP-based weight setting optimisation methodology; it also uses traffic matrix estimation techniques that are required as input to the weight setting models that have been devised. The motivation for developing OptiFlow was to provide a prototype set of tools that meet the congestion management needs of networking industries (ISPs and telecommunications companies - telcos)