A constrained maximum available frequency slots on path based online routing and spectrum allocation for dynamic traffic in elastic optical networks

Elastic optical networking is a potential candidate to support dynamic traffic with heterogeneous data rates and variable bandwidth requirements with the support of the optical orthogonal frequency division multiplexing technology (OOFDM). During the dynamic network operation, lightpath arrives and departs frequently and the network status updates accordingly. Fixed routing and alternate routing algorithms do not tune according to the current network status which are computed offline. Therefore, offline algorithms greedily use resources with an objective to compute shortest possible paths and results in high blocking probability during dynamic network operation. In this paper, adaptive routing algorithms are proposed for shortest path routing as well as alternate path routing which make routing decision based on the maximum idle frequency slots (FS) available on different paths. The proposed algorithms select an underutilized path between different choices with maximum idle FS and efficiently avoids utilizing a congested path. The proposed routing algorithms are compared with offline routing algorithms as well as an existing adaptive routing algorithm in different network scenarios. It has been shown that the proposed algorithms efficiently improve network performance in terms of FS utilization and blocking probability during dynamic network operation

Physical layer transmitter and routing optimization to maximize the traffic throughput of a nonlinear optical mesh network

This paper investigates the physical layer optimization as a means of improving the utilization of limited network resources. A transparent optical network operating in the nonlinear transmission regime using coherent optical technology is considered. A physical layer model is described that allows the transmission signal quality to be included in the optimization process. Initially a fixed power, route-adapted modulation format approach is taken using integer linear programming to solve the static route allocation problem. It is shown that for the 14-node, 21-link NSF mesh network adaptation of the modulation formats leads to increases in data throughput of 17%. Optimization of the individual transmitter launch powers and spectral channel allocation results in a SNR margin of 2.3 dB, which is used to further increase the overall network traffic throughput exceeding the fixed PM-QPSK modulation format by as much as 50%. Compared to other work this paper highlights that increased gains in network throughput can be achieved if nonlinear interference is included in the routing and spectral assignment algorithm and individual transmitter spectral assignment and launch power is optimized to minimize nonlinear interference

Virtualisation and resource allocation in MECEnabled metro optical networks

The appearance of new network services and the ever-increasing network traffic and number of connected devices will push the evolution of current communication networks towards the Future Internet. In the area of optical networks, wavelength routed optical networks (WRONs) are evolving to elastic optical networks (EONs) in which, thanks to the use of OFDM or Nyquist WDM, it is possible to create super-channels with custom-size bandwidth. The basic element in these networks is the lightpath, i.e., all-optical circuits between two network nodes. The establishment of lightpaths requires the selection of the route that they will follow and the portion of the spectrum to be used in order to carry the requested traffic from the source to the destination node. That problem is known as the routing and spectrum assignment (RSA) problem, and new algorithms must be proposed to address this design problem. Some early studies on elastic optical networks studied gridless scenarios, in which a slice of spectrum of variable size is assigned to a request. However, the most common approach to the spectrum allocation is to divide the spectrum into slots of fixed width and allocate multiple, consecutive spectrum slots to each lightpath, depending on the requested bandwidth. Moreover, EONs also allow the proposal of more flexible routing and spectrum assignment techniques, like the split-spectrum approach in which the request is divided into multiple "sub-lightpaths". In this thesis, four RSA algorithms are proposed combining two different levels of flexibility with the well-known k-shortest paths and first fit heuristics. After comparing the performance of those methods, a novel spectrum assignment technique, Best Gap, is proposed to overcome the inefficiencies emerged when combining the first fit heuristic with highly flexible networks. A simulation study is presented to demonstrate that, thanks to the use of Best Gap, EONs can exploit the network flexibility and reduce the blocking ratio. On the other hand, operators must face profound architectural changes to increase the adaptability and flexibility of networks and ease their management. Thanks to the use of network function virtualisation (NFV), the necessary network functions that must be applied to offer a service can be deployed as virtual appliances hosted by commodity servers, which can be located in data centres, network nodes or even end-user premises. The appearance of new computation and networking paradigms, like multi-access edge computing (MEC), may facilitate the adaptation of communication networks to the new demands. Furthermore, the use of MEC technology will enable the possibility of installing those virtual network functions (VNFs) not only at data centres (DCs) and central offices (COs), traditional hosts of VFNs, but also at the edge nodes of the network. Since data processing is performed closer to the enduser, the latency associated to each service connection request can be reduced. MEC nodes will be usually connected between them and with the DCs and COs by optical networks. In such a scenario, deploying a network service requires completing two phases: the VNF-placement, i.e., deciding the number and location of VNFs, and the VNF-chaining, i.e., connecting the VNFs that the traffic associated to a service must transverse in order to establish the connection. In the chaining process, not only the existence of VNFs with available processing capacity, but the availability of network resources must be taken into account to avoid the rejection of the connection request. Taking into consideration that the backhaul of this scenario will be usually based on WRONs or EONs, it is necessary to design the virtual topology (i.e., the set of lightpaths established in the networks) in order to transport the tra c from one node to another. The process of designing the virtual topology includes deciding the number of connections or lightpaths, allocating them a route and spectral resources, and finally grooming the traffic into the created lightpaths. Lastly, a failure in the equipment of a node in an NFV environment can cause the disruption of the SCs traversing the node. This can cause the loss of huge amounts of data and affect thousands of end-users. In consequence, it is key to provide the network with faultmanagement techniques able to guarantee the resilience of the established connections when a node fails. For the mentioned reasons, it is necessary to design orchestration algorithms which solve the VNF-placement, chaining and network resource allocation problems in 5G networks with optical backhaul. Moreover, some versions of those algorithms must also implements protection techniques to guarantee the resilience system in case of failure. This thesis makes contribution in that line. Firstly, a genetic algorithm is proposed to solve the VNF-placement and VNF-chaining problems in a 5G network with optical backhaul based on star topology: GASM (genetic algorithm for effective service mapping). Then, we propose a modification of that algorithm in order to be applied to dynamic scenarios in which the reconfiguration of the planning is allowed. Furthermore, we enhanced the modified algorithm to include a learning step, with the objective of improving the performance of the algorithm. In this thesis, we also propose an algorithm to solve not only the VNF-placement and VNF-chaining problems but also the design of the virtual topology, considering that a WRON is deployed as the backhaul network connecting MEC nodes and CO. Moreover, a version including individual VNF protection against node failure has been also proposed and the effect of using shared/dedicated and end-to-end SC/individual VNF protection schemes are also analysed. Finally, a new algorithm that solves the VNF-placement and chaining problems and the virtual topology design implementing a new chaining technique is also proposed. Its corresponding versions implementing individual VNF protection are also presented. Furthermore, since the method works with any type of WDM mesh topologies, a technoeconomic study is presented to compare the effect of using different network topologies in both the network performance and cost.Departamento de Teoría de la Señal y Comunicaciones e Ingeniería TelemáticaDoctorado en Tecnologías de la Información y las Telecomunicacione

An Overview on Application of Machine Learning Techniques in Optical Networks

Today's telecommunication networks have become sources of enormous amounts of widely heterogeneous data. This information can be retrieved from network traffic traces, network alarms, signal quality indicators, users' behavioral data, etc. Advanced mathematical tools are required to extract meaningful information from these data and take decisions pertaining to the proper functioning of the networks from the network-generated data. Among these mathematical tools, Machine Learning (ML) is regarded as one of the most promising methodological approaches to perform network-data analysis and enable automated network self-configuration and fault management. The adoption of ML techniques in the field of optical communication networks is motivated by the unprecedented growth of network complexity faced by optical networks in the last few years. Such complexity increase is due to the introduction of a huge number of adjustable and interdependent system parameters (e.g., routing configurations, modulation format, symbol rate, coding schemes, etc.) that are enabled by the usage of coherent transmission/reception technologies, advanced digital signal processing and compensation of nonlinear effects in optical fiber propagation. In this paper we provide an overview of the application of ML to optical communications and networking. We classify and survey relevant literature dealing with the topic, and we also provide an introductory tutorial on ML for researchers and practitioners interested in this field. Although a good number of research papers have recently appeared, the application of ML to optical networks is still in its infancy: to stimulate further work in this area, we conclude the paper proposing new possible research directions

RMSA algorithms resilient to multiple node failures in dynamic EONs

In Elastic Optical Networks (EONs), the way different service demands are supported in the network is ruled by the Routing, Modulation and Spectrum Assignment (RMSA) algorithm, which decides how the spectrum resources of the optical network are assigned to each service demand. In a dynamic EON, demand requests arrive randomly one at a time and the accepted demands last in the network for a random time duration. So, one important goal of the RMSA algorithm is the efficient use of the spectrum resources to maximize the acceptance probability of future demand requests. On the other hand, multiple failure events are becoming a concern to network operators as such events are becoming more frequent in time. In this work, we consider the case of multiple node failure events caused by malicious attacks against network nodes. In order to obtain RMSA algorithms resilient to such events, a path disaster availability metric was recently proposed which takes into account the probability of each path not being disrupted by an attack. This metric was proposed in the offline variant of the RMSA problem where all demands are assumed to be known at the beginning. Here, we exploit the use of the path disaster availability metric in the RMSA of dynamic EONs. In particular, we propose RMSA algorithms combining the path disaster availability metric with spectrum usage metrics in a dynamic way based on the network load level. The aim is that the efficient use of the resources is relaxed for improved resilience to multiple node failures when the EON is lightly loaded, while it becomes the most important goal when the EON becomes heavily loaded. We present simulation results considering a mix of unicast and anycast services in 3 well-known topologies. The results show that the RMSA algorithms combining the path disaster availability metric with spectrum usage metrics are the best trade-off between spectrum usage efficiency and resilience to multiple node failures.publishe

Multicast routing from a set of data centers in elastic optical networks

This paper introduces the Multi-Server Multicast (MSM) approach for Content Delivery Networks (CDNs) delivering services offered by a set of Data Centers (DCs). All DCs offer the same services. The network is an Elastic Optical Network (EON) and for a good performance, routing is performed directly at the optical layer. Optical switches have heterogeneous capacities, that is, light splitting is not available in all switches. Moreover, frequency slot conversion is not possible in any of them. We account for the degradation that optical signals suffer both in the splitting nodes, as well as across fiber links to compute their transmission reach. The optimal solution of the MSM is a set of light-hierarchies. This multicast route contains a light trail from one of the DCs to each of the destinations with respect to the optical constraints while optimizing an objective (e.g., minimizing a function). Finding such a structure is often an NP-hard problem. The light-hierarchies initiated from different DCs permit delivering the multicast session to all end-users with a better utilization of the optical resources, while also reducing multicast session latencies, as contents can be delivered from such DCs closer to end-users. We propose an Integer Linear Programming (ILP) formulation to optimally decide on which light-hierarchies should be setup. Simulation results illustrate the benefits of MSM in two reference backbone networks.Peer ReviewedPostprint (author's final draft