Multipath Multiplexing for Capacity Enhancement in SIMO Wireless Systems

This paper proposes a novel and simple orthogonal faster than Nyquist (OFTN) data transmission and detection approach for a single input multiple output (SIMO) system. It is assumed that the signal having a bandwidth $B$ is transmitted through a wireless channel with $L$ multipath components. Under this assumption, the current paper provides a novel and simple OFTN transmission and symbol-by-symbol detection approach that exploits the multiplexing gain obtained by the multipath characteristic of wideband wireless channels. It is shown that the proposed design can achieve a higher transmission rate than the existing one (i.e., orthogonal frequency division multiplexing (OFDM)). Furthermore, the achievable rate gap between the proposed approach and that of the OFDM increases as the number of receiver antennas increases for a fixed value of $L$. This implies that the performance gain of the proposed approach can be very significant for a large-scale multi-antenna wireless system. The superiority of the proposed approach is shown theoretically and confirmed via numerical simulations. {Specifically, we have found {upper-bound average} rates of 15 bps/Hz and 28 bps/Hz with the OFDM and proposed approaches, respectively, in a Rayleigh fading channel with 32 receive antennas and signal to noise ratio (SNR) of 15.3 dB. The extension of the proposed approach for different system setups and associated research problems is also discussed.Comment: IEEE Transactions on Wireless Communication

An investigation into a DSP implementation of partial response signaling for 4800 bits per second full-duplex data communications over M.1020 telephone lines

Includes bibliographical references.This thesis investigates high-speed digital transmission over a conditioned, voice-grade telephone circuit (M.1020), using a technique known as partial response signaling, or PRS. In particular, the case where 4800 bps, full-duplex transmission is required in a CCI'PT V. 22 type format is investigated. The main v.22 criterion to be adhered to, is that frequency-division multiplexing (FDM) is to be used as the means of separating thetransmit and receive channels. The carrier frequencies should be 1200 Hz and 2400 Hz respectively. The investigation concerns the modulation and demodulation sections only

Reduced Receivers for Faster-than-Nyquist Signaling and General Linear Channels

Fast and reliable data transmission together with high bandwidth efficiency are important design aspects in a modern digital communication system. Many different approaches exist but in this thesis bandwidth efficiency is obtained by increasing the data transmission rate with the faster-than-Nyquist (FTN) framework while keeping a fixed power spectral density (PSD). In FTN consecutive information carrying symbols can overlap in time and in that way introduce a controlled amount of intentional intersymbol interference (ISI). This technique was introduced already in 1975 by Mazo and has since then been extended in many directions. Since the ISI stemming from practical FTN signaling can be of significant duration, optimum detection with traditional methods is often prohibitively complex, and alternative equalization methods with acceptable complexity-performance tradeoffs are needed. The key objective of this thesis is therefore to design reduced-complexity receivers for FTN and general linear channels that achieve optimal or near-optimal performance. Although the performance of a detector can be measured by several means, this thesis is restricted to bit error rate (BER) and mutual information results. FTN signaling is applied in two ways: As a separate uncoded narrowband communication system or in a coded scenario consisting of a convolutional encoder, interleaver and the inner ISI mechanism in serial concatenation. Turbo equalization where soft information in the form of log likelihood ratios (LLRs) is exchanged between the equalizer and the decoder is a commonly used decoding technique for coded FTN signals. The first part of the thesis considers receivers and arising stability problems when working within the white noise constraint. New M-BCJR algorithms for turbo equalization are proposed and compared to reduced-trellis VA and BCJR benchmarks based on an offset label idea. By adding a third low-complexity M-BCJR recursion, LLR quality is improved for practical values of M. M here measures the reduced number of BCJR computations for each data symbol. An improvement of the minimum phase conversion that sharpens the focus of the ISI model energy is proposed. When combined with a delayed and slightly mismatched receiver, the decoding allows a smaller M without significant loss in BER. The second part analyzes the effect of the internal metric calculations on the performance of Forney- and Ungerboeck-based reduced-complexity equalizers of the M-algorithm type for both ISI and multiple-input multiple-output (MIMO) channels. Even though the final output of a full-complexity equalizer is identical for both models, the internal metric calculations are in general different. Hence, suboptimum methods need not produce the same final output. Additionally, new models working in between the two extremes are proposed and evaluated. Note that the choice of observation model does not impact the detection complexity as the underlying algorithm is unaltered. The last part of the thesis is devoted to a different complexity reducing approach. Optimal channel shortening detectors for linear channels are optimized from an information theoretical perspective. The achievable information rates of the shortened models as well as closed form expressions for all components of the optimal detector of the class are derived. The framework used in this thesis is more general than what has been previously used within the area

Novel Multicarrier Memory Channel Architecture Using Microwave Interconnects: Alleviating the Memory Wall

abstract: The increase in computing power has simultaneously increased the demand for input/output (I/O) bandwidth. Unfortunately, the speed of I/O and memory interconnects have not kept pace. Thus, processor-based systems are I/O and interconnect limited. The memory aggregated bandwidth is not scaling fast enough to keep up with increasing bandwidth demands. The term "memory wall" has been coined to describe this phenomenon. A new memory bus concept that has the potential to push double data rate (DDR) memory speed to 30 Gbit/s is presented. We propose to map the conventional DDR bus to a microwave link using a multicarrier frequency division multiplexing scheme. The memory bus is formed using a microwave signal carried within a waveguide. We call this approach multicarrier memory channel architecture (MCMCA). In MCMCA, each memory signal is modulated onto an RF carrier using 64-QAM format or higher. The carriers are then routed using substrate integrated waveguide (SIW) interconnects. At the receiver, the memory signals are demodulated and then delivered to SDRAM devices. We pioneered the usage of SIW as memory channel interconnects and demonstrated that it alleviates the memory bandwidth bottleneck. We demonstrated SIW performance superiority over conventional transmission line in immunity to cross-talk and electromagnetic interference. We developed a methodology based on design of experiment (DOE) and response surface method techniques that optimizes the design of SIW interconnects and minimizes its performance fluctuations under material and manufacturing variations. Along with using SIW, we implemented a multicarrier architecture which enabled the aggregated DDR bandwidth to reach 30 Gbit/s. We developed an end-to-end system model in Simulink and demonstrated the MCMCA performance for ultra-high throughput memory channel. Experimental characterization of the new channel shows that by using judicious frequency division multiplexing, as few as one SIW interconnect is sufficient to transmit the 64 DDR bits. Overall aggregated bus data rate achieves 240 GBytes/s data transfer with EVM not exceeding 2.26% and phase error of 1.07 degree or less.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

Analysis of high capacity short reach optical links

Over the last few years, the global Internet traffic has grown exponentially due to the advent of the social networks, high definition streaming, online gaming, high performance computing and cloud services. The network is saturating, facing a challenge to provide enough capacity to such ever-demanding bandwidth expensive applications. Fiber optic communications is the only technology capable of dealing such high demands due to its advantages over the traditional electrical transmission technology. The short haul transmissions currently rely on direct detection due to low cost, low power and low complexity as compared to the coherent detection schemes. In order to increase the bit rate, several advance modulation formats are under investigation for short reach transmissions. Such links mostly use intensity modulation direct detection (IMDD) schemes providing a simple system when compared with the coherent receivers. In this thesis the performance of Multilevel Pulse Amplitude Modulation (MPAM) is studied using IMDD, providing good spectral efficiency as well as able to deal with the limited electronic devices bandwidth. MPAM can address the typical optical channel without the need to go with more complex and higher power modulation schemes. It provides a trade off between sensitivity and the complexity. So a simple communication system using MPAM is implemented using an external modulated laser transmitted over a distance of 2 km. In order to reduce the cost, single laser and single receiver technique is being adopted. The performance of the MPAM system in a bandwidth limited scenarios is studied with a possibility to use equalization techniques to improve the sensitivity. The utility of Forward Error Correction codes is also studied to improve the performance without increasing the latency. By increasing the number of bits per symbol, the system becomes more sensitive to the impairments. Moreover, the components and the connectors in the transmission system also introduces multipath interference (MPI) that is a key limitation to the use of advance modulation formats. Hence a detailed study is carried out to investigate the MPI effects. At the end, a novel idea based on reflective Mach-Zehnder modulator (MZM) is presented that reuses the modulated wavelength eliminating the need for a laser. As a consequent, the cost and power consumption specifically targeted for the optical interconnect environment is reduced. In a nutshell, the thesis provides an overview of the direct detection system targeted to the short optical links. It includes the studies related to the optical transmission systems and provides an insight of the available advance modulation formats and the detection schemes. Finally, the simulations and laboratory results are provided showing that adoption of MPAM is a viable solution that should be employed in high capacity short reach optical links

Advanced Modulation and Coding Technology Conference

The objectives, approach, and status of all current LeRC-sponsored industry contracts and university grants are presented. The following topics are covered: (1) the LeRC Space Communications Program, and Advanced Modulation and Coding Projects; (2) the status of four contracts for development of proof-of-concept modems; (3) modulation and coding work done under three university grants, two small business innovation research contracts, and two demonstration model hardware development contracts; and (4) technology needs and opportunities for future missions

Conformação de pulso de formas de onda OFDM para a interface aérea 5G

Orientador: Luís Geraldo Pedroso MeloniDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: As formas de onda com multiplexação ortogonal por divisão de freqüência (OFDM) foram utilizadas com sucesso na interface aérea 3GPP LTE para superar a seletividade do canal e proporcionar uma boa eficiência espectral e altas taxas de transmissão de dados. O próximo sistema de comunicações 5G tem como objetivo oferecer suporte a mais serviços do que o antecessor, como comunicações de banda larga móveis, comunicações de tipo máquina e comunicações de baixa latência, e considera muitos outros cenários de aplicação, como o uso de espectro fragmentado. Esta diversidade de serviços com diferentes requisitos não pode ser suportada pela OFDM convencional, pois OFDM configura toda a largura de banda com parâmetros que atendem a um serviço em particular. Além disso, pode ocorrer interferência interportadora (ICI) quando a OFDM convencional é usada com multiplexação assíncrona de múltiplos usuários e isso é devido às altas emissões fora de banda (OOB) das subportadoras e à violação da condição de ortogonalidade do sinal. Portanto, para atender aos requisitos das futuras aplicações sem fio 5G, o desenvolvimento de uma interface aérea inovadora com novas capacidades torna-se necessário, em particular, uma nova forma de onda mais espectralmente ágil do que OFDM capaz de suportar múltiplas configurações, suprimindo efetivamente a interferência entre usuários, e com integração direta com as camadas superiores. Este trabalho centra-se em duas técnicas de conformação de pulsos para reduzir a emissões fora de banda e melhorar o desempenho de formas de onda baseadas em OFDM. A conformação de pulsos pode permitir o uso de parametrizações múltiplas dentro da forma de onda e abandonar os paradigmas rígidos de ortogonalidade e sincronismo com uma degradação de desempenho causada por interferência intersymbol (ISI) e ICI relativamente baixa. A primeira parte aborda um método de modelagem de pulso baseado na filtragem por subportadora para reduzir a emissão fora de banda no transmissor e interferência de canal adjacente (ACI) no receptor. Ele pode ser implementado usando funções de janela e alguns formatos de janela são apresentados nesta parte. O primeiro usa o prefixo cíclico (CP) existente dos símbolos para suavizar as transições abruptas do sinal, portanto, os grandes lóbulos espectrais sinc causados pelos filtros retangulares. Isso garante a compatibilidade retroativa em sistemas que usam OFDM com prefixo cíclico (CP-OFDM). O formato da segunda janela estende o comprimento do CP para reter a capacidade da forma de onda para combater a propagação do atraso do canal. Os efeitos no desempenho do ISI e ICI são estudados em termos de relação de sinal para interferência (SIR) e taxa de erro de bit (BER) usando formas de onda LTE em um cenário de espectro fragmentado multi-usuário. A segunda parte deste trabalho aborda o desenho e análise de filtros para a contenção espectral flexível em transceptores com filtragem baseada em sub-banda. Este filtro, chamado aqui semi-equiripple, exibe melhor atenuação na banda de rejeição para reduzir as interferências entre subbandas do que os filtros equiripple e filtros sinc baseados em janelamento e também possui boas características de resposta ao impulso para reduzir o ISI. O projeto de filtros baseia-se no algoritmo Parks-McClellan para obter diferentes taxas de decaimento da banda de parada e atende a especificações arbitrárias de máscaras de emissão de espectro (SEM) com baixa distorção dentro da banda. Portanto, pode ser útil para obter baixas emissões fora da banda e configurar sub-bandas com parâmetros independentes, uma vez que a interferência assíncrona é contida pelos filtros. São estudadas três distorções de ISI no filtro: espalhamento de símbolos relacionado à causalidade do filtro, ecos de símbolos devido a ondulações na banda e amplificação de ISI devido a amostras de valores anômalas nas caudas de sua resposta de impulso. O desempenho do filtro é avaliado em termos de densidade de espectro de potência (PSD) e conformidade com SEMs, taxa de erro de modulação (MER) e operação em um esquema assíncrono multi-serviço usando uma única forma de onda. O SIR e o efeito da filtragem na precisão da modulação são avaliados usando formas de onda OFDM ISDB-T e LTE. Estruturas de hardware flexíveis também são propostas para implementações reais. Os resultados mostram que esses métodos de conformação de pulso permitem que a forma de onda explore os fragmentos de espectro disponíveis e ofereça suporte a múltiplos serviços sem uma penalidade de desempenho significativa, o que pode permitir uma interface aérea mais flexívelAbstract: Orthogonal frequency division multiplexing (OFDM) waveforms have been used successfully in the 3GPP Long Term Evolution (LTE) air interface to overcome the channel selectivity and to provide good spectrum efficiency and high transmission data rates. The forthcoming 5G communication system aims to support more services than its predecessor, such as enhanced mobile broadband, machine-type communications and low latency communications, and considers many other application scenarios such as the fragmented spectrum use. This diversity of services with different requirements cannot be supported by conventional OFDM since OFDM configures the entire bandwidth with parameters attending one service in particular. Also, substantial intercarrier interference (ICI) can occur when conventional OFDM is used with asynchronous multiuser multiplexing and this is due to the high out-of-band (OOB) emissions of the subcarriers and the violation of the signal orthogonality constraint. Therefore, to meet the requirements of future 5G wireless applications, the development of an innovative air interface with new capabilities becomes necessary, in particular, a new waveform more spectrally agile than OFDM capable of supporting multiple configurations, suppressing the inter-user interference effectively, and with straightforward integration with the upper layers. This work focuses on two pulse shaping techniques to reduce the OOB emission and improve the in-band and OOB performances of OFDM-based waveforms. Pulse shaping can enable the use of multiple parameterizations within the waveform and abandon the strict paradigms of orthogonality and synchronism with relatively low performance degradation caused by intersymbol interference (ISI) and ICI. The first part addresses a pulse shaping method based on per-subcarrier filtering to reduce both OOB emission in the transmitter and adjacent channel interference (ACI) in the receiver. It can be implemented using window functions and some window formats are presented in this part. The first uses the existing cyclic prefix (CP) of OFDM symbols to smooth abrupt transitions of the signal, thus the large sinc spectral sidelobes caused by the rectangular filters. This guarantees backwards compatibility in systems using conventional cyclic prefixed OFDM (CP-OFDM). The second window format extends the CP length to retain the waveform ability to combat channel delay spread. The effects on performance of ISI and ICI are studied in terms of the signal to interference ratio (SIR) and bit error rate (BER) using LTE waveforms in a multi-user fragmented spectrum scenario. The second part of this work addresses the design and analysis of a filters for flexible spectral containment in subband-based filtering transceivers. This filter, called here semi-equiripple, exhibits better stopband attenuation to reduce the inter-subband interferences than equiripple and windowed truncated sinc filters and also has good impulse response characteristics to reduce ISI. The design is based on the Parks-McClellan algorithm to obtain different stopband decay rates and meet arbitrary spectrum emission masks (SEM) specifications with low in-band distortion. Therefore, it can be useful to achieve low OOB emission and configure subbands with independent parameters since the asynchronous interference is contained by the filters. Three ISI distortions in the filter are studied: symbol spreading related to the filter causality, symbol echoes due to in-band ripples, and ISI amplification due to outlier samples in the tails of its impulse response. The performance of the filter is assessed in terms of the power spectrum density (PSD) and compliance with tight SEMs, modulation error rate (MER) and operation in a multi-service asynchronous scheme using a single waveform. The SIR and the effect of filtering on the modulation accuracy are evaluated using OFDM ISDB-T and LTE waveforms. Flexible hardware structures are also proposed for actual implementations. The results show that these pulse shaping methods enable the waveform to exploit the available spectrum fragments and support multiple services without significant performance penalty, which can allow a more flexible air interfaceMestradoTelecomunicações e TelemáticaMestre em Engenharia ElétricaCAPE

Improving the Spectral Efficiency of Modulation on Conjugate-Reciprocal Zeros (MOCZ) for Non-Coherent Short Packet Communications

Future internet of things (IoT) applications need to meet the stringent requirements of ultra high reliability and ultra low-latency. To meet the ultra low-latency requirements, the IoT networks will be employing the short data packets for data transmission between the devices. Employing the short data packet communications (SPCs) is not straightforward as there are several design problems related to the SPCs which still remain unsolved. Since the block length for SPCs is finite; the channel estimation is a challenging problem. This is because the conventionally used known pilot symbols to estimate the channel will severely degrade the spectral efficiency of SPCs. Recently a novel non-coherent modulation technique named as modulation on conjugate reciprocal zeros (MOCZ) was proposed which supports the blind detection of transmitted data, i.e., detection without the knowledge of channel. It is also well known that SPCs suffers from data rate loss as compared to the channel capacity limit. Hence, in this thesis, we aim to increase the spectral efficiency of MOCZ. We improve the spectral efficiency of MOCZ by proposing a technique named as spectrally efficient modulation on conjugate reciprocal zeros (SE-MOCZ) which combines MOCZ with a technique named as faster than Nyquist (FTN) Signaling. Hence; in SE-MOCZ, we end up transmitting the coefficients of MOCZ, modulated on T-orthogonal pulses, at a rate faster than the Nyquist limit, i.e., τT, instead of T, where 0 < τ < 1. That said, we intentionally introduce inter symbol interference (ISI) between the received samples of SE MOCZ. To partially remove the ISI, we introduce a discrete-time filter at the receiver. We further optimize the radius of complex zeros of SE-MOCZ in the presence of ISI. Simulation results show the gains of proposed SE-MOCZ in terms of spectral efficiency

Investigation of coding and equalization for the digital HDTV terrestrial broadcast channel

Includes bibliographical references (p. 241-248).Supported by the Advanced Telecommunications Research Program.Julien J. Nicolas