An Adaptive Packet Aggregation Algorithm (AAM) for Wireless Networks

Packet aggregation algorithms are used to improve the throughput performance by combining a number of packets into a single transmission unit in order to reduce the overhead associated with each transmission within a packet-based communications network. However, the throughput improvement is also accompanied by a delay increase. The biggest drawback of a significant number of the proposed packet aggregation algorithms is that they tend to only optimize a single metric, i.e. either to maximize throughput or to minimize delay. They do not permit an optimal trade-off between maximizing throughput and minimizing delay. Therefore, these algorithms cannot achieve the optimal network performance for mixed traffic loads containing a number of different types of applications which may have very different network performance requirements. In this thesis an adaptive packet aggregation algorithm called the Adaptive Aggregation Mechanism (AAM) is proposed which achieves an aggregation trade-off in terms of realizing the largest average throughput with the smallest average delay compared to a number of other popular aggregation algorithms under saturation conditions in wireless networks. The AAM algorithm is the first packet aggregation algorithm that employs an adaptive selection window mechanism where the selection window size is adaptively adjusted in order to respond to the varying nature of both the packet size and packet rate. This algorithm is essentially a feedback control system incorporating a hybrid selection strategy for selecting the packets. Simulation results demonstrate that the proposed algorithm can (a) achieve a large number of sub-packets per aggregate packet for a given delay and (b) significantly improve the performance in terms of the aggregation trade-off for different traffic loads. Furthermore, the AAM algorithm is a robust algorithm as it can significantly improve the performance in terms of the average throughput in error-prone wireless networks

Belaidžio ryšio tinklų terpės prieigos valdymo tyrimas

Over the years, consumer requirements for Quality of Service (QoS) has been growing exponentially. Recently, the ratification process of newly IEEE 802.11ad amendment to IEEE 802.11 was finished. The IEEE 802.11ad is the newly con-sumer wireless communication approach, which will gain high spot on the 5G evolution. Major players in wireless market, such as Qualcomm already are inte-grating solutions from unlicensed band, like IEEE 802.11ac, IEEE 802.11ad into their architecture of LTE PRO (the next evolutionary step for 5G networking) (Qualcomm 2013; Parker et al. 2015). As the demand is growing both in enter-prise wireless networking and home consumer markets. Consumers started to no-tice the performance degradation due to overcrowded unlicensed bands. The un-licensed bands such as 2.4 GHz, 5 GHz are widely used for up-to-date IEEE 802.11n/ac technologies with upcoming IEEE 802.11ax. However, overusage of the available frequency leads to severe interference issue and consequences in to-tal system performance degradation, currently existing wireless medium access method can not sustain the increasing intereference and thus wireless needs a new methods of wireless medium access. The main focal point of this dissertation is to improve wireless performance in dense wireless networks. In dissertation both the conceptual and multi-band wireless medium access methods are considered both from theoretical point of view and experimental usage. The introduction chapter presents the investigated problem and it’s objects of research as well as importance of dissertation and it’s scientific novelty in the unlicensed wireless field. Chapter 1 revises used literature. Existing and up-to-date state-of-the-art so-lution are reviewed, evaluated and key point advantages and disadvantages are analyzed. Conclusions are drawn at the end of the chapter. Chapter 2 describes theoretical analysis of wireless medium access protocols and the new wireless medium access method. During analysis theoretical simula-tions are performed. Conclusions are drawn at the end of the chapter. Chapter 3 is focused on the experimental components evaluation for multi-band system, which would be in line with theoretical concept investigations. The experimental results, showed that components of multi-band system can gain sig-nificant performance increase when compared to the existing IEEE 802.11n/ac wireless systems. General conclusions are drawn after analysis of measurement results

무선 통신 네트워크 환경에서의 효과적인 비디오 스트리밍 기법 연구

학위논문 (박사)-- 서울대학교 대학원 : 전기정보공학부, 2013. 8. 최성현.오늘날 무선 네트워크 통신 기술의 발달로 인해 고품질의 비디오 스트리밍 서비스에 대한 요구가 급증하고 있다. 새로운 60~GHz 광대역 고속 무선 통신 기술은 기존의 무선 통신 기술에서는 불가능했던, 고품질의 무압축 비디오 스트리밍을 가능하게 한다. 제한된 무선 자원 환경에서 고품질의 비디오 서비스를 지원하기 위해 주어진 채널 환경에서 적절한 변조 및 코딩 기술을 선택하는 효율적인 링크 적응 기법이 필요하다. 비디오 스트리밍의 품질을 수치로 평가하는 ePSNR을 정의하고, 불평등 오류 보호 기법(UEP)을 추가로 도입하여 보다 세밀한 링크 적응 기법을 가능케 한다. 정의한 ePSNR을 기반으로 (1) 주어진 무선 자원에서 비디오 품질을 최대화, 혹은 (2) 목표 비디오 품질을 만족하는 무선 자원 사용을 최소화, 하는 두가지 링크 적응 기법들을 제안한다. 다양한 시뮬레이션 결과를 통해, 정의한 ePSNR이 비디오 품질을 잘 표현하고 있음을 확인하였다. 또한, 제안한 링크 적응 기법들이 비디오 스트리밍 서비스를 위한 적절한 품질을 제공하면서, 동시에 자원 효율성을 향상시킴을 검증하였다. 한편, 순방향 오류 정정 기법(FEC)은 무선랜 환경에서 고품질의 신뢰성있는 비디오 멀티캐스트를 지원한다. 무선랜 환경에서 복수개의 액세스포인트(AP)간의 조정을 통한 신뢰성있는 비디오 멀티캐스트 기법을 제시한다. 복수개의 AP간의 조정을 통해 각각의 AP들이 (1) 완전히 서로 다른, 혹은 (2) 부분적으로 서로 다른, 인코딩된 패킷들을 전송하게 하여, 공간 및 시간적 다양성을 멀티캐스트 유저에게 제공할 수 있다. 추가로, 제한된 무선 자원을 보다 효율적으로 사용하기 위해, 순방향 오류 정정 기법의 코딩 비율 적응 기법을 위한 자원 할당 알고리즘을 제안한다. 또한, FEC 디코딩 후의 비디오 패킷의 전송율를 예측할 수 있는 방법을 제안한다. 다양한 시뮬레이션과 실험을 통해 제안한 기법들의 우수성을 확인하였다. 멀티캐스트 전송은 기본적으로 무선 채널 오류로 인해 전송 실패가 발생할 가능성을 내포한다. 그러나 기존의 무선랜 표준에서는 멀티캐스트 환경에서 자동 반복 요청 기법(ARQ)을 통한 손실 조정 방법을 제공하지 않았다. 멀티캐스트 전송의 비신뢰성 문제를 해결하기 위해, 자동 반복 요청 기법(ARQ)과 순방향 오류 정정 기법(FEC)를 함께 고려한 신뢰성 있는 멀티캐스트 전송 기법을 제안한다. 신뢰성 있는 멀티캐스트 전송을 위한 피드백 교환의 오버헤드를 줄이기 위한 복수개의 효율적인 피드백 기법을 제시한다. 제안한 피드백 기법은 액세스포인트(AP)가 멀티캐스트 유저들의 손실된 패킷들의 복원을 위해 필요한 패리티(parity) 패킷의 개수를 쉽게 알 수 있도록 한다. 피드백 간의 충돌을 감안한 의도적인 동시 전송을 통해 피드백 오버헤드를 감소시킬 수 있다. 추가로, 효율적인 피드백 프로토콜을 활용하여, 변조 및 코딩 기법(MCS)의 폐쇄적 피드백 기반의 물리 전송 속도 적응 기법을 제안한다. 성능 검증을 통해 제안한 기법들이 효율적으로 피드백 오버헤드를 감소시키며, 동시에 신뢰성있는 멀티캐스트 전송을 보장함을 검증하였다.Today, along with the rapid growth of the network performance, the demand for high-quality video streaming services has greatly increased. The emerging 60 GHz multi-Gbps wireless technology enables the streaming of high-quality uncompressed video, which was not possible with other existing wireless technologies. To support such high quality video with limited wireless resources, an efficient link adaptation policy, which selects the proper Modulation and Coding Scheme (MCS) for a given channel environment, is essential. We introduce a new metric, called expected Peak Signal-to-Noise Ratio (ePSNR), to numerically estimate the video streaming quality, and additionally adopt Unequal Error Protection (UEP) schemes that enable flexible link adaptation. Using the ePSNR as a criterion, we propose two link adaptation policies with different objectives. The proposed link adaptation policies attempt to (1) maximize the video quality for given wireless resources, or (2) minimize the required wireless resources while meeting the video quality. Our extensive simulation results demonstrate that the introduced variable, i.e., ePSNR, well represents the level of video quality. It is also shown that the proposed link adaptation policies can enhance the resource efficiency while achieving acceptable quality of the video streaming. Meanwhile, Forward Error Correction (FEC) can be exploited to realize reliable video multicast over Wi-Fi with high video quality. We propose reliable video multicast over Wi-Fi networks with coordinated multiple Access Points (APs) to enhance video quality. By coordinating multiple APs, each AP can transmit (1) entirely different or (2) partially different FEC-encoded packets so that a multicast receiver can benefit from both spatial and time diversities. The proposed scheme can enlarge the satisfactory video multicast region by exploiting the multi-AP diversity, thus serving more multicast receivers located at cell edge with satisfactory video quality. We propose a resource-allocation algorithm for FEC code rate adaptation, utilizing the limited wireless resource more efficiently while enhancing video quality. We also introduce the method for estimating the video packet delivery ratio after FEC decoding. The effectiveness of the proposed schemes is evaluated via extensive simulation and experimentation. The proposed schemes are observed to enhance the ratio of satisfied users by up to 37.1% compared with the conventional single AP multicast scheme. The multicast transmission is inherently unreliable due to the transmission failures caused by wireless channel errors, however, the error control with Automatic Repeat reQuest (ARQ) is not provided for the multicast transmission in legacy IEEE 802.11 standard. To overcome the unreliability of multicast transmission, finally, we propose the reliable multicast protocols considering both ARQ and packet-level FEC together. For the proposed reliable multicast protocol, to reduce the overheads of feedback messages while providing the reliable multicast service, the multiple efficient feedback protocols, i.e., Idle-time-based feedback, Slot-based feedback, Flash-based feedback, and Busy-time-based feedback, are proposed. The proposed feedback protocols let the AP know easily the number of requiring parity frames of the worst user(s) for the recovery of the lost packets. The feedback overheads can be reduced by intending the concurrent transmissions, which makes the collisions, between feedback messages. In addition, utilizing the efficient feedback protocols, we propose the PHY rate adaptation based on the close-loop MCS feedback in multicast transmissions. From the performance evaluations, the proposed protocols can efficiently reduce the feedback overheads, while the reliable multicast transmissions are guaranteed.1 Introduction 1 1.1 Video Streaming over Wireless Networks 1 1.1.1 Uncompressed Video Streaming over 60 GHz band 2 1.1.2 Video Multicast over IEEE 802.11 WLAN 3 1.2 Overview of Existing Approaches 5 1.2.1 Link Adaptation over Wireless Networks 5 1.2.2 Video Streaming over IEEE 802.11 WLAN 6 1.2.3 Reliable Multicast over IEEE 802.11 WLAN 8 1.3 Main Contributions 9 1.4 Organization of the Dissertation 11 2 Link Adaptation for High-Quality Uncompressed Video Streaming in 60 GHz Wireless Networks 12 2.1 Introduction 12 2.2 ECMA-387 and Wireless HDMI 17 2.2.1 ECMA-387 18 2.2.2 Wireless HDMI (HDMI PAL) 21 2.2.3 UEP Operations 22 2.2.4 ACK Transmissions for Video Streaming 23 2.2.5 Latency of Compressed and Uncompressed Video Streaming 24 2.3 ePSNR-Based Link Adaptation Policies 25 2.3.1 ePSNR 28 2.3.2 PSNR-based Link Adaptation 30 2.4 Performance Evaluation 33 2.4.1 Evaluation of ePSNR 34 2.4.2 Performance of Link Adaptation 40 2.5 Summary 45 3 Reliable Video Multicast over Wi-Fi Networks with Coordinated Multiple APs 47 3.1 Introduction 47 3.2 System Environments 50 3.2.1 Time-Slotted Multicast 50 3.2.2 FEC Coding Schemes 52 3.3 Reliable Video Multicast with Coordinated Multiple APs 52 3.3.1 Proposed Video Multicast 52 3.3.2 Video Multicast Procedure 55 3.4 FEC Code Rate Adaptation 58 3.4.1 Estimation of Delivery Ratio 59 3.4.2 Greedy FEC Code Rate Adaptation 61 3.5 Performance Evaluation 63 3.5.1 Raptor Code Performance 64 3.5.2 Simulation Results: No Fading 66 3.5.3 Simulation Results: Fading Channel 69 3.5.4 Simulation Results: Code Rate Adaptation 70 3.5.5 Experimental Results 74 3.5.6 Prototype Implementation 76 3.6 Summary 79 4 Reliable Video Multicast with Efficient Feedback over Wi-Fi 81 4.1 Introduction 81 4.2 Motivation 85 4.3 Proposed Feedback Protocols for Reliable Multicast 87 4.3.1 Idle-time-based Feedback 88 4.3.2 Slot-based Feedback 89 4.3.3 Flash-based Feedback 91 4.3.4 Busy-time-based Feedback 92 4.4 PHY Rate Adaptation in Multicast Transmission 93 4.5 Performance Evaluation 96 4.5.1 Performance evaluation considering feedback error 104 4.6 Summary 109 5 Conclusion and Future Work 110 5.1 Research Contributions 110 5.2 Future Research Directions 111 Abstract (In Korean) 121Docto

End to end architecture and mechanisms for mobile and wireless communications in the Internet

Architecture et mécanismes de bout en bout pour les communications mobiles et sans fil dans l'Internet. La gestion performante de la mobilité et l'amélioration des performances des couches basses sont deux enjeux fondamentaux dans le contexte des réseaux sans fil. Cette thèse apporte des solutions originales et innovantes qui visent à répondre à ces deux problématiques empêchant à ce jour d'offrir des possibilités de communication performantes et sans couture aux usagers mobiles accédant à l'Internet via des réseaux d'accès locaux sans fil (WLAN). Ces solutions se distinguent en particulier par l'impact minimum qu'elles ont sur les protocoles standards de l'Internet (niveaux transport et réseau) ou de l'IEEE (niveaux physique et liaison de données). S'inscrivant dans les paradigmes de "bout en bout" et "cross-layer", notre architecture permet d'offrir des solutions efficaces pour la gestion de la mobilité : gestion de la localisation et des handover en particulier. En outre, nous montrons que notre approche permet également d'améliorer l'efficacité des transmissions ainsi que de résoudre efficacement plusieurs syndromes identifiés au sein de 802.11 tels que les anomalies de performance, l'iniquité entre les flux et l'absence de contrôle de débit entre la couche MAC et les couches supérieures. Cette thèse résout ces problèmes en combinant des modèles analytiques, des simulations et de réelles expérimentations. Ces mécanismes adaptatifs ont été développés et intégrés dans une architecture de communication qui fournit des services de communication à haute performance pour réseaux sans fils tels que WIFI et WIMAX. ABSTRACT : Wireless networks, because of the potential pervasive and mobile communication services they offer, are becoming the dominant Internet access networks. However, the legacy Internet protocols, still dominant at that time, have not been designed with mobility and wireless in mind. Therefore, numerous maladjustments and “defaults of impedance” can be observed when combining wireless physical and MAC layers with the traditional upper layers. This thesis proposes several solutions for a pacific coexistence between these communication layers that have been defined and designed independently. Reliable mobility management and Low layer performance enhancements are two main challenging issues in the context of wireless networks. Mobility management (which is mostly based on mobile IP architecture nowadays) aims to continuously assign and control the wireless connections of mobile nodes amongst a space of wireless access networks. Low layer performance enhancements mainly focus on the transmission efficiency such as higher rate, lower loss, interference avoidance. This thesis addresses these two important issues from an original and innovative approach that, conversely to the traditional contributions, entails a minimum impact on the legacy protocols and internet infrastructure. Following the “end to end” and “cross layer” paradigms, we address and offer efficient and light solutions to fast handover, location management and continuous connection support through a space of wireless networks. Moreover, we show that such an approach makes it possible to enhance transmission efficiency and solve efficiently several syndromes that plague the performances of current wireless networks such as performance anomaly, unfairness issues and maladjustment between MAC layer and upper layers. This thesis tackles these issues by combining analytical models, simulations and real experiments. The resulting mechanisms have been developed and integrated into adaptive mobility management communication architecture that delivers high performing communication services to mobile wireless systems, with a focus on WIFI and WIMAX access networks

Performance of SW-ARQ in bacterial quorum communications

Bacteria communicate with one another by exchanging specific chemical signals called autoinducers. This process, also called quorum sensing, enables a cluster of bacteria to regulate their gene expression and behaviour collectively and synchronously, such as bioluminescence, virulence, sporulation and conjugation. Bacteria assess their population density by detecting the concentration of autoinducers. In Vibrio fischeri, which is a heterotrophic Gram-negative marine bacterium, quorum sensing relies on the synthesis, accumulation and subsequent sensing of a signalling molecule (3-oxo-C6-HSL, an N-acyl homoserine lactone or AHL). In this work, a data link layer protocol for a bacterial communication paradigm based on diffusion is introduced, considering two populations of bacteria as the transmitter node and the receiver node, instead of employing two individual bacteria. Moreover, some initial results are provided, which concern the application of the Stop-N-Wait Automatic Repeat reQuest (SW-ARQ) schemes to the proposed model. The performances of the system are later evaluated, in terms of the transmission time, frame error rate, energy consumption and transmission efficiency

Cross-layer design and optimization of medium access control protocols for wlans

This thesis provides a contribution to the field of Medium Access Control (MAC) layer protocol design for wireless networks by proposing and evaluating mechanisms that enhance different aspects of the network performance. These enhancements are achieved through the exchange of information between different layers of the traditional protocol stack, a concept known as Cross-Layer (CL) design. The main thesis contributions are divided into two parts. The first part of the thesis introduces a novel MAC layer protocol named Distributed Queuing Collision Avoidance (DQCA). DQCA behaves as a reservation scheme that ensures collision-free data transmissions at the majority of the time and switches automatically to an Aloha-like random access mechanism when the traffic load is low. DQCA can be enriched by more advanced scheduling algorithms based on a CL dialogue between the MAC and other protocol layers, to provide higher throughput and Quality of Service (QoS) guarantees. The second part of the thesis explores a different challenge in MAC layer design, related to the ability of multiple antenna systems to offer point-to-multipoint communications. Some modifications to the recently approved IEEE 802.11n standard are proposed in order to handle simultaneous multiuser downlink transmissions. A number of multiuser MAC schemes that handle channel access and scheduling issues and provide mechanisms for feedback acquisition have been presented and evaluated. The obtained performance enhancements have been demonstrated with the help of both theoretical analysis and simulation obtained results

Contributions to QoS and energy efficiency in wi-fi networks

The Wi-Fi technology has been in the recent years fostering the proliferation of attractive mobile computing devices with broadband capabilities. Current Wi-Fi radios though severely impact the battery duration of these devices thus limiting their potential applications. In this thesis we present a set of contributions that address the challenge of increasing energy efficiency in Wi-Fi networks. In particular, we consider the problem of how to optimize the trade-off between performance and energy effciency in a wide variety of use cases and applications. In this context, we introduce novel energy effcient algorithms for real-time and data applications, for distributed and centralized Wi-Fi QoS and power saving protocols and for Wi-Fi stations and Access Points. In addition, the di¿erent algorithms presented in this thesis adhere to the following design guidelines: i) they are implemented entirely at layer two, and can hence be easily re-used in any device with a Wi-Fi interface, ii) they do not require modi¿cations to current 802.11 standards, and can hence be readily deployed in existing Wi-Fi devices, and iii) whenever possible they favor client side solutions, and hence mobile computing devices implementing them can benefit from an increased energy efficiency regardless of the Access Point they connect to. Each of our proposed algorithms is thoroughly evaluated by means of both theoretical analysis and packet level simulations. Thus, the contributions presented in this thesis provide a realistic set of tools to improve energy efficiency in current Wi-Fi networks

Enabling Technologies for Ultra-Reliable and Low Latency Communications: From PHY and MAC Layer Perspectives

© 1998-2012 IEEE. Future 5th generation networks are expected to enable three key services-enhanced mobile broadband, massive machine type communications and ultra-reliable and low latency communications (URLLC). As per the 3rd generation partnership project URLLC requirements, it is expected that the reliability of one transmission of a 32 byte packet will be at least 99.999% and the latency will be at most 1 ms. This unprecedented level of reliability and latency will yield various new applications, such as smart grids, industrial automation and intelligent transport systems. In this survey we present potential future URLLC applications, and summarize the corresponding reliability and latency requirements. We provide a comprehensive discussion on physical (PHY) and medium access control (MAC) layer techniques that enable URLLC, addressing both licensed and unlicensed bands. This paper evaluates the relevant PHY and MAC techniques for their ability to improve the reliability and reduce the latency. We identify that enabling long-term evolution to coexist in the unlicensed spectrum is also a potential enabler of URLLC in the unlicensed band, and provide numerical evaluations. Lastly, this paper discusses the potential future research directions and challenges in achieving the URLLC requirements