Two novel nonlinear companding schemes with iterative receiver to reduce PAPR in multi-carrier modulation systems

Companding transform is an efficient and simple method to reduce the Peak-to-Average Power Ratio (PAPR) for Multi-Carrier Modulation (MCM) systems. But if the MCM signal is only simply operated by inverse companding transform at the receiver, the resultant spectrum may exhibit severe in-band and out-of-band radiation of the distortion components, and considerable peak regrowth by excessive channel noises etc. In order to prevent these problems from occurring, in this paper, two novel nonlinear companding schemes with a iterative receiver are proposed to reduce the PAPR. By transforming the amplitude or power of the original MCM signals into uniform distributed signals, the novel schemes can effectively reduce PAPR for different modulation formats and sub-carrier sizes. Despite moderate complexity increasing at the receiver, but it is especially suitable to be combined with iterative channel estimation. Computer simulation results show that the proposed schemes can offer good system performances without any bandwidth expansion

PAPR Reduction in OFDM System by using Nonlinear Companding Technique

Non linear companding technique is proposed to reduce the high peak to average power ratio (PAPR) of orthogonal frequency division multiplexing system. Use of companding for peak - to - average - power ratio (PAPR) control is explored for a link involving a non - linear transmit power amplifier with orthogonal frequency division multiplexing (OFDM). This paper analyses the improvement in bit error rate (BER) and overall system performance by employing non linear companding technique for PAPR reduction in digital video broadcasting (DVB - T) system

Analysis of Improved µ-Law Companding Technique for OFDM Systems

YesHigh Peak-to-Average-Power Ratio (PAPR) of transmitted signals is a common problem in broadband telecommunication systems using an orthogonal frequency division multiplexing (OFDM) modulation scheme, as it increases transmitter power consumption. In consumer applications where it impacts mobile terminal battery life and infrastructure running costs, this is a major factor in customer satisfaction. Companding techniques have been recently used to alleviate this high PAPR. In this paper, a companding scheme with an offset, amidst two nonlinear companding levels, is proposed to achieve better PAPR reduction while maintaining an acceptable bit error rate (BER) level, resulting in electronic products of higher power efficiency. Study cases have included the effect of companding on the OFDM signal with and without an offset. A novel closed-form approximation for the BER of the proposed companding scheme is also presented, and its accuracy is compared against simulation results. A method for choosing best companding parameters is presented based on contour plots. Practical emulation of a real time OFDM-based system has been implemented and evaluated using a Field Programmable Gate Array (FPGA)

A simple nonlinear companding transform for nonlinear compensation of direct-detection optical OFDM systems

In direct-detection OFDM systems, the nonlinear effects caused by optical modulation and fiber transmission can degrade the system performance severely. In this study, we propose a new nonlinear companding transform to improve the performance of direct detection optical OFDM transmission systems. The demonstration is realized by Monte-Carlo simulation of the intensity modulation and direct-detection DCO-OFDM optical transmission system at 40 Gbps over a 80 km of standard single mode fiber link. The influence of the companding parameters on the performance of system in different nonlinear transmission conditions has been investigated via simulation

A New PAPR reduction Technique based on Precoding and Gamma Companding Technique for OFDM system

Multi-carrier modulation is less sensitive to time dispersion of the channel. In particular, Orthogonal Frequency Division Multiplexing (OFDM) has gained more attention in the last decade owing to rising power of digital signal processing. In spite of the several difficulties that entails during implementation of OFDM system, one of the major drawbacks in OFDM is high peak to average power ratio. Hence it is mandate to research on the characteristics of the PAPR in association with its distribution and reduction in OFDM systems. Myriad of techniques were introduced to reduce Bit error rate and PAPR. Amidst these techniques, precoding gives best solution for reducing PAPR. But in this technique, more null subcarriers are incorporated which leads to out-of-band power emission and in turn reduces the transmission rate. In order to minimize OOB power emission, we combine precoding in frequency domain and gamma companding technique in time domain. The gamma compander promotes OOB power emission. Simulation results reveals a trade off between OOB power emission and PAPR reduction

New Hybrid Schemes for PAPR Reduction in OFDM Systems

الـ 3GPP قدمت مشروع LTE لتلبية الطلبات المتزايدة لخدمات الاتصالات ذات السرعة العالية والجودة العالية. يستخدم نظام الـ LTE تقنية مضاعفة تقسيم التردد المتعامد (OFDM) في شكل (OFDMA) في الوصلة الهابطة (Downlink) وشكل الـ (SCFDMA) في الوصلة الصاعدة (Uplink) مجتمعة مع تقنية الـ MIMO لتقديم معدل بيانات عالي، قدرة عالية، وحصانة ضد القنوات متعددة المسارات. ومع ذلك لا يزال ارتفاع نسبة القدرة العظمة إلى المتوسط (PAPR) لإشارة الـ LTE المرسلة هي المشكلة الرئيسية التي تعمل على تدهور كفاءة النظام بشك عام وإمكانية استهلاك الطاقة. لذلك كرست الكثير من البحوث للحد من تدهور الأداء بسبب مشكلة الـ PAPR في أنظمة LTE-OFDM. تعتبر طرق ضغط الإشارة (Companding Methods) جزءاً من الطرق المعروفة والتي تعتبر سهلة ومنخفضة التعقيد، وبلا قيود على شكل التضمين وحجم عدد الحوامل (Subcarrier Size)، ولها خصائص طيفية جيدة، ومع ذلك فإن هذه الطرق تقلل الـ PAPR بمقدار ضئيل. وقد اقترح هذا البحث سبعة طرق هجينة جديدة على أساس مزيج من Zaddoff Chu Matrix Transform (ZCT) مع ست أساليب مختلفة من طرق ضغط الإشارة وهي Rooting Companding (RCT)، New Error Function Companding (NERF)، Absolute Exponential Companding (AEXP)، Logarithmic Rooting Companding (LogR)، Cosine Companding (COS)، وTangent Rooting Companding (TanhR). بالإضافة إلى ذلك تم تطوير الطريقة الهجينة السابعة وتجمع الـ Zaddoff Chu Matrix Transform (ZCT) مع طريقة جديدة مقترحة تسمى Advanced AEXP (AAEXP). أظهرت النتائج أن هذه الطرق المتطورة تجمع بين خصائص طريقة الـ ZCT مع خصائص طرق ضغط الإشارة، وتحقق أداء أمثل وانخفاضاً أفضل من حيث PAPR وBER. كما حققت طريقة الـ ZCT+AAEXP أفضل النتائج مقارنة بالطرق الأخرى.The 3rd Generation Partnership Project (3GPP) introduced LTE to meet increasingly demands for communication services with high speed and quality. LTE uses OFDM in the form of OFDMA in the downlink and SCFDMA in the uplink combined with MIMO offering high data rate, high capacity and immunity against multipath channels. However, still the high PAPR of the LTE transmitted signal is the major problem affecting overall system performance degradation and power efficiency. A plenty of research has been devoted to reduce the performance degradation due to the PAPR problem inherent to LTE OFDM systems. A portion of the current techniques such companding methods have low-complexity, no constraint on modulation format and subcarrier size, good distortion and spectral properties; however, they have limited PAPR reduction capabilities. This paper proposes seven new hybrid schemes including Zaddoff Chu Matrix Transform (ZCT) precoding and six modern companding methods; Rooting Companding (RCT), New Error Function Companding (NERF), Absolute Exponential Companding (AEXP), Logarithmic Rooting Companding (LogR), Cosine Companding (COS) and Tangent Rooting Companding (TanhR) companding. Furthermore, the seventh proposed hybrid scheme has been added incorporating ZCT precoding with new proposed companding called Advanced AEXP (AAEXP) companding. The developed methods are combining properties of both ZCT & Compandings, and achieving superior PAPR performance and optimal BER. Simulations results illustrate that the new seven proposed hybrid schemes can achieve better PAPR reduction, and BER performance and the best achievement has been achieved by ZCT+AAEXP scheme

Piecewise companding transform assisted optical-OFDM systems for indoor visible light communications

In visible light communications (VLCs) relying on intensity-modulation and direct detection (IM/DD), the conversion from electrical signals to optical signals and the limited dynamic range of the light-emitting diodes (LEDs) constitute the fundamental impediments in the way of high-integrity communications, especially when orthogonal frequency-division multiplexing (OFDM) is employed. In IM/DD VLCs, only real-valued positive signals are used for signal transmission. However, the Fourier transform of OFDM systems is operated in the complex domain. In order to meet the requirements of the IM/DD VLCs, the complex-to-real conversion is achieved at the cost of reducing the bandwidth efficiency. Moreover, OFDM signals experience a high peak-to-average power ratio; hence, typically clipping is used for confining the positive-valued signals within the LED's dynamic range. However, hard clipping leads to the loss of orthogonality for optical OFDM (O-OFDM) signals, generating inter-carrier interference. As a result, the performance of the clipping-based O-OFDM systems may be severely degraded. In this paper, the concept of piecewise companding transform (CT) is introduced into the O-OFDM system advocated, forming the CTO-OFDM arrangement. We first investigate the general principles and design criteria of the piecewise CTO-OFDM. Based on our studies, three types of piecewise companders, namely, the constant probability sub-distribution function, linear PsDF (LPsDF), and the non-LPsDF-based CT, are designed. Furthermore, we investigate the nonlinear effect of hard clipping and of our CT on O-OFDM systems in the context of different scenarios by both analytical and simulation techniques. Our investigations show that the CTO-OFDM constitutes a promising signaling scheme conceived for VLCs, which exhibits a high bandwidth efficiency, high flexibility, high reliability, as well as a high data-rate, despite experiencing nonlinear distortions

Hybrid clipping and companding techniques based peak to average power ratio reduction in orthogonal frequency division multiplexing based differential chaos shift keying system

In this paper, a hybrid approach using clipping and companding techniques is introduced to reduce the peak to average power ratio (PAPR) of orthogonal frequency division multiplexing based differential chaos shift keying (OFDM-DCSK), which is the major drawback of the OFDM-DCSK. The hybrid function is processed at the end of the transmitter before transmitting the signal. However, there is no need for an inverse function at the receiver, which decreases the system complexity. Several techniques have been proposed in the literature for decreasing the PAPR value. Clipping and companding are active methods in terms of reducing the PAPR. Finally, the PAPR reduction and bit error rate (BER) performances are evaluated. The simulation results show that this technique gives better performance as compared with the clipping and companding techniques