39 research outputs found

    Single-Photon Counting Receivers for Optical Wireless Communications in Future 6G Networks

    Get PDF
    International audienceOptical wireless communication (OWC) offers several complementary advantages to radio-frequency wireless networks such as its massive available spectrum. Hence, it is widely anticipated that OWC will assume a pivotal role in the forth-coming sixth generation wireless communication networks. Although significant progress has been achieved in OWC over the past decades, the outage induced by occasionally low received optical power continues to pose a key limiting factor for its deployment. In this work, we discuss the potential role of single-photon counting (SPC) receivers as a promising solution to overcome this limitation. We present an overview of the applications of SPC-based OWC systems in 6G networks, introduce their major performance-limiting factors, propose a performance-enhancement frame-work to tackle these issues, and identify critical areas of open problems for future research

    Receiver design for SPAD-based VLC systems under Poisson-Gaussian mixed noise model

    No full text
    Single-photon avalanche diode (SPAD) is a promising photosensor because of its high sensitivity to optical signals in weak illuminance environment. Recently, it has drawn much attention from researchers in visible light communications (VLC). However, existing literature only deals with the simplified channel model, which only considers the effects of Poisson noise introduced by SPAD, but neglects other noise sources. Specifically, when an analog SPAD detector is applied, there exists Gaussian thermal noise generated by the transimpedance amplifier (TIA) and the digital-to-analog converter (D/A). Therefore, in this paper, we propose an SPAD-based VLC system with pulse-amplitude-modulation (PAM) under Poisson-Gaussian mixed noise model, where Gaussian-distributed thermal noise at the receiver is also investigated. The closed-form conditional likelihood of received signals is derived using the Laplace transform and the saddle-point approximation method, and the corresponding quasi-maximum-likelihood (quasi-ML) detector is proposed. Furthermore, the Poisson-Gaussian-distributed signals are converted to Gaussian variables with the aid of the generalized Anscombe transform (GAT), leading to an equivalent additive white Gaussian noise (AWGN) channel, and a hard-decision-based detector is invoked. Simulation results demonstrate that, the proposed GAT-based detector can reduce the computational complexity with marginal performance loss compared with the proposed quasi-ML detector, and both detectors are capable of accurately demodulating the SPAD-based PAM signals

    5 Gbps optical wireless communication using commercial SPAD array receivers

    Get PDF
    Photon counting detectors such as single-photon avalanche diode (SPAD) arrays can be used to improve the sensitivity of optical wireless communication (OWC) systems. However, the achievable data rate of SPAD-based OWC systems is strongly limited by the nonlinearity induced by the SPAD dead time. In this work, the performance of a SPAD-based OWC system with orthogonal frequency division multiplexing (OFDM) is investigated and compared with that of on-off keying (OOK). We employ nonlinear equalization, peak-toaverage power ratio optimization by adjusting the OFDM clipping level, and adaptive bit and energy loading to achieve a record experimental data rate of 5 Gbps. The contrasting optimal regimes of operation of the two modulation schemes are also demonstrated

    A comparison of APD and SPAD based receivers for visible light communications

    Get PDF
    Visible light communications (VLC) is an alternative method of indoor wireless communications that requires sensitive receivers. Ideally, single photon avalanche detectors (SPADs) could be used to create more sensitive receivers. However, the dead-time, finite output pulse width and photon detection efficiency of existing SPAD arrays limits their sensitivity and bandwidth. In this paper an accurate equation for the impact of dead-time on the sensitivity of a SPAD array is presented. In addition the impact of the width of the output pulses on the on-off keying (OOK) data rate is investigated. Finally, a comparison between receivers containing an APD and a large array of SPADs shows that although the receiver containing the SPAD is more sensitive in the dark the APD-based receiver is more sensitive in normal operating condition. However, the models that predict the performance of both receivers suggest that newer SPAD arrays will enable significant improvements in receiver sensitivity

    SPAD-Based Optical Wireless Communication with Signal Pre-Distortion and Noise Normalization

    Get PDF
    In recent years, there has been a growing interest in exploring the application of single-photon avalanche diode (SPAD) in optical wireless communication (OWC). As a photon counting detector, SPAD can provide much higher sensitivity compared to the other commonly used photodetectors. However, SPAD-based receivers suffer from significant dead-time-induced non-linear distortion and signal dependent noise. In this work, we propose a novel SPAD-based OWC system in which the non-linear distortion caused by dead time can be successfully eliminated by the pre-distortion of the signal at the transmitter. In addition, another system with joint pre-distortion and noise normalization functionality is proposed. Thanks to the additional noise normalization process, for the transformed signal at the receiver, the originally signal dependent noise becomes signal independent so that the conventional signal detection techniques designed for AWGN channels can be employed to decode the signal. Our numerical results demonstrate the superiority of the proposed SPAD-based systems compared to the existing systems in terms of BER performance and achievable data rate

    Statistical Modeling of Single-Photon Avalanche Diode Receivers for Optical Wireless Communications

    Get PDF
    In this paper, a comprehensive analytical approach is presented for modeling the counting statistics of active quenching and passive quenching single-photon avalanche diode (SPAD) detectors. It is shown that, unlike ideal photon counting receiver for which the detection process is described by a Poisson arrival process, photon counts in practical SPAD receivers do not follow a Poisson distribution and are highly affected by the dead time caused by the quenching circuit. Using the concepts of renewal theory, the exact expressions for the probability distribution and moments (mean and variance) of photocounts in the presence of dead time are derived for both active quenching and passive quenching SPADs. The derived probability distributions are validated through Monte Carlo simulations and it is demonstrated that the moments match with the existing empirical models for the moments of SPAD photocounts. Furthermore, an optical communication system with on-off keying and binary pulse position modulation is considered and the bit error performance of the system for different dead time values and background count levels is evaluated
    corecore