Signal to noise measurement circuit

Phase lock reference provides a rapid and accurate method of determining the signal-to-noise ratio at the intermediate frequency stage of a receiver

Excess noise measurement in In0.53Ga0.47As

The excess noise due to impact ionization has been measured explicitly for the first time in In/sub 0.53/Ga/sub 0.47/As. By using a phase sensitive detection technique, the noise due to avalanche current was determined even in the presence of high tunneling currents. The excess noise due to pure electron injection measured on a series of thick In/sub 0.53/Ga/sub 0.47/As p/sup +/-i-n/sup +/ diodes suggests large electron to hole ionization coefficient ratio between 3.7 at electric field of 310 kV/spl middot/cm/sup -1/ to 5.3 at 260 kV/spl middot/cm/sup -1/. Excess noise was also measured at fields as low as 155 kV/spl middot/cm/sup -1/ suggesting that significant impact ionization occurs at these low fields. The multiplication and excess noise calculated using published ionization coefficients and ignoring dead space effects, gave good agreement with the experimental data for mixed and pure electron injection

Flyover-noise measurement and prediction

Details are presented for the measurement and prediction of aircraft flyover noise to be used for certification, research and development, community noise surveys, airport monitors, and pass fail criteria. Test details presented are applicable to all types of aircraft, both large and small, and the use of Federal Aviation Regulations (FAR) Part 36 (ref. 1) is emphasized. Accuracy of noise measurements is important. Thus, a pass-fail criterion should be used for all noise measurements. Finally, factors which influence the sound propagation and noise prediction procedures, such as atmospheric and ground effects, are also presented

Introduction to Quantum Noise, Measurement and Amplification

The topic of quantum noise has become extremely timely due to the rise of quantum information physics and the resulting interchange of ideas between the condensed matter and AMO/quantum optics communities. This review gives a pedagogical introduction to the physics of quantum noise and its connections to quantum measurement and quantum amplification. After introducing quantum noise spectra and methods for their detection, we describe the basics of weak continuous measurements. Particular attention is given to treating the standard quantum limit on linear amplifiers and position detectors using a general linear-response framework. We show how this approach relates to the standard Haus-Caves quantum limit for a bosonic amplifier known in quantum optics, and illustrate its application for the case of electrical circuits, including mesoscopic detectors and resonant cavity detectors.Comment: Substantial improvements over initial version; include supplemental appendices

What Can We Learn from Noise? -- Mesoscopic Nonequilibrium Statistical Physics --

Mesoscopic systems -- small electric circuits working in quantum regime -- offer us a unique experimental stage to explorer quantum transport in a tunable and precise way. The purpose of this Review is to show how they can contribute to statistical physics. We introduce the significance of fluctuation, or equivalently noise, as noise measurement enables us to address the fundamental aspects of a physical system. The significance of the fluctuation theorem (FT) in statistical physics is noted. We explain what information can be deduced from the current noise measurement in mesoscopic systems. As an important application of the noise measurement to statistical physics, we describe our experimental work on the current and current noise in an electron interferometer, which is the first experimental test of FT in quantum regime. Our attempt will shed new light in the research field of mesoscopic quantum statistical physics.Comment: 15 pages, 10 figures. Review articl

Electrochemical Noise Measurement Technique in Corrosion Research

Electrochemical noise measurement is one of the novel techniques currently being used in corrosion monitoring. Two major methods of analysis in use are the Fast Fourier Transform (FFT) and the Maximum Entropy Method (MEM). This paper reviews the techniques fundamental background – types of noise, physical data; description, classification and characteristics; mathematical background of random data and spectral analysis. Recent progress made in its application to corrosion monitoring and other electrochemical reaction phenomena are also examined

Noise Measurement Setup for Quartz Crystal Microbalance

Quartz crystal microbalance (QCM) is a high sensitive chemical sensor which has found widespread spectrum of applications. There are several mechanisms that are related to fluctuation phenomena. Since the aim of our research is oriented to study the sensitivity and influence of different kind of noises on sensor resolution, we modified an existing method to measure the small frequency fluctuation of QCM. The paper describes our measurement setup, in which a quartz crystal oscillator with coated active layers and a reference quartz oscillator are driven by two oscillator circuits. Each one regulates a frequency of a crystal at the minimum impedance which corresponds to the series resonance. A data-acquisition card triggers on the rise-edges of the output signal and stores these corresponding times on which the instantaneous frequency is estimated by own-written software. In comparison to other measurement setups, our approach can acquire immediate change of QCM frequency, thus, chemical processes can be even described on the basis of high-order statistics. The experiments were provided on quartz crystals with the sorption layer of polypyrrole, which is suitable for the construction of QCM humidity sensors

Edge-type connectors evaluated by electrical noise measurement

Electrical noise measurement system measures noise generated by edge-type connectors and circuit cards when they are subjected to sinusoidal vibration. It provides a signal across the contact area and monitors the signal change during vibration. Noise measured can be expressed as a varying change in total contact resistance

Recent free-flight boundary-surface aerody- namic noise measurements

Free-flight boundary-layer aerodynamic noise measurement

Additional correction of 4 percent Saturn 5 protuberance test data

Transonic wind tunnel background noise measurement for analysis of Saturn 5 model protuberance test dat