Static Compaction of Test Sequences for Synchronous Sequential Circuits

Today, VLSI design has progressed to a stage where it needs to incorporate methods of testing circuits. The Automatic Test Pattern Generation (ATPG) is a very attractive method and feasible on almost any combinational and sequential circuit. Currently available automatic test pattern generators (ATPGs) generate test sets that may be excessively long. Because a cost of testing depends on the test length. compaction techniques have been used to reduce that length. The motivation for studying test compaction is twofold. Firstly, by reducing the test sequence length. the memory requirements during the test application and the test application time are reduced. Secondly, the extent of test compaction possible for deterministic test sequences indicates that test pattern generators spend a significant amount of time generating test vectors that are not necessary. The compacted test sequences provide a target for more efficient deterministic test generators. Two types of compaction techniques exist: dynamic and static. The dynamic test sequence compaction performs compaction concurrently with the test generation process and often requires modification of the test generator. The static test sequence compaction is done in a post-processing step to the test generation and is independent of the test generation algorithm and process. In the thesis, a new idea for static compaction of test sequences for synchronous sequential circuits has been proposed. Our new method - SUSEM (Set Up Sequence Elimination Method) uses the circuit state information to eliminate some setup sequences for the target faults and consequently reduce the test sequence length. The technique has been used for the test sequences generated by HITEC test generator. ISCAS89 benchmark circuits were used in our experiments, for some circuits which have a large number of target faults and relatively small number of flip-flops, the very significant compactions have been obtained. The more important is that this method can be used to improve the test generation procedure unlike most static compaction methods which blindly or randomly remove parts of test vectors and cannot be used to improve the test generators

New Techniques to Reduce the Execution Time of Functional Test Programs

The compaction of test programs for processor-based systems is of utmost practical importance: Software-Based Self-Test (SBST) is nowadays increasingly adopted, especially for in-field test of safety-critical applications, and both the size and the execution time of the test are critical parameters. However, while compacting the size of binary test sequences has been thoroughly studied over the years, the reduction of the execution time of test programs is still a rather unexplored area of research. This paper describes a family of algorithms able to automatically enhance an existing test program, reducing the time required to run it and, as a side effect, its size. The proposed solutions are based on instruction removal and restoration, which is shown to be computationally more efficient than instruction removal alone. Experimental results demonstrate the compaction capabilities, and allow analyzing computational costs and effectiveness of the different algorithms

Built-In Test Sequence Generation for Synchronous Sequential Circuits Based on Loading and Expansion of Test Subsequences

We describe an on-chip test generation scheme for synchronous sequential circuits that allows at-speed testing of such circuits. The proposed scheme is based on loading of (short) input sequences into an on-chip memory, and expansion of these sequences on-chip into test sequences. Complete coverage of modeled faults is achieved by basing the selection of the loaded sequences on a deterministic test sequence T 0, and ensuring that every fault detected by T 0 is detected by the expanded version of at least one loaded sequence. Experimental results presented for benchmark circuits show that the length of the sequence that needs to be stored at any time is on the average 10 % of the length of T 0, and that the total length of all the loaded sequences is on the average 46 % of the length of T 0. 1

Transition Faults and Transition Path Delay Faults: Test Generation, Path Selection, and Built-In Generation of Functional Broadside Tests

As the clock frequency and complexity of digital integrated circuits increase rapidly, delay testing is indispensable to guarantee the correct timing behavior of the circuits. In this dissertation, we describe methods developed for three aspects of delay testing in scan-based circuits: test generation, path selection and built-in test generation. We first describe a deterministic broadside test generation procedure for a path delay fault model named the transition path delay fault model, which captures both large and small delay defects. Under this fault model, a path delay fault is detected only if all the individual transition faults along the path are detected by the same test. To reduce the complexity of test generation, sub-procedures with low complexity are applied before a complete branch-and-bound procedure. Next, we describe a method based on static timing analysis to select critical paths for test generation. Logic conditions that are necessary for detecting a path delay fault are considered to refine the accuracy of static timing analysis, using input necessary assignments. Input necessary assignments are input values that must be assigned to detect a fault. The method calculates more accurate path delays, selects paths that are critical during test application, and identifies undetectable path delay faults. These two methods are applicable to off-line test generation. For large circuits with high complexity and frequency, built-in test generation is a cost-effective method for delay testing. For a circuit that is embedded in a larger design, we developed a method for built-in generation of functional broadside tests to avoid excessive power dissipation during test application and the overtesting of delay faults, taking the functional constraints on the primary input sequences of the circuit into consideration. Functional broadside tests are scan-based two-pattern tests for delay faults that create functional operation conditions during test application. To avoid the potential fault coverage loss due to the exclusive use of functional broadside tests, we also developed an optional DFT method based on state holding to improve fault coverage. High delay fault coverage can be achieved by the developed method for benchmark circuits using simple hardware

Test Cost Reduction for Logic Circuits——Reduction of Test Data Volume and Test Application Time——

論理回路の大規模化とともに,テストコストの増大が深刻な問題となっている.特に大規模な論理回路では,テストデータ量やテスト実行時間の削減が,テストコスト削減の重要な課題である.本論文では,高い故障検出率のテストパターンをできるだけ少ないテストベクトル数で実現するためのテストコンパクション技術,付加ハードウェアによるテストデータの展開・伸長を前提に圧縮を行うテストコンプレッション技術,及び,スキャン設計回路におけるテスト実行時間削減技術について概説する

An Efficient Test Relaxation Technique for Synchronous Sequential Circuits

Testing systems-on-a-chip (SOC) involves applying huge amounts of test data, which is stored in the tester memory and then transferred to the circuit under test (CUT) during test application. Therefore, practical techniques, such as test compression and compaction, are required to reduce the amount of test data in order to reduce both the total testing time and the memory requirements for the tester. Test-set relaxation can improve the efficiency of both test compression and test compaction. In addition, the relaxation process can identify selfinitializing test sequences for synchronous sequential circuits. In this paper, we propose an efficient test relaxation technique for synchronous sequential circuits that maximizes the number of unspecified bits while maintaining the same fault coverage as the original test set

Multi-Cycle at Speed Test

In this research, we focus on the development of an algorithm that is used to generate a minimal number of patterns for path delay test of integrated circuits using the multi-cycle at-speed test. We test the circuits in functional mode, where multiple functional cycles follow after the test pattern scan-in operation. This approach increases the delay correlation between the scan and functional test, due to more functionally realistic power supply noise. We use multiple at-speed cycles to compact K-longest paths per gate tests, which reduces the number of scan patterns. After a path is generated, we try to place each path in the first pattern in the pattern pool. If the path does not fit due to conflicts, we attempt to place it in later functional cycles. This compaction approach retains the greedy nature of the original dynamic compaction algorithm where it will stop if the path fits into a pattern. If the path is not able to compact in any of the functional cycles of patterns in the pool, we generate a new pattern. In this method, each path delay test is compared to at-speed patterns in the pool. The challenge is that the at-speed delay test in a given at-speed cycle must have its necessary value assignments set up in previous (preamble) cycles, and have the captured results propagated to a scan cell in the later (coda) cycles. For instance, if we consider three at-speed (capture) cycles after the scan-in operation, and if we need to place a fault in the first capture cycle, then we must generate it with two propagation cycles. In this case, we consider these propagation cycles as coda cycles, so the algorithm attempts to select the most observable path through them. Likewise, if we are placing the path test in the second capture cycle, then we need one preamble cycle and one coda cycle, and if we are placing the path test in the third capture cycle, we require two preamble cycles with no coda cycles

An Efficient Test Relaxation Technique for Synchronous Sequential Circuits

Testing systems-on-a-chip (SOC) involves applying huge amounts of test data, which is stored in the tester memory and then transferred to the circuit under test (CUT) during test application. Therefore, practical techniques, such as test compression and compaction, are required to reduce the amount of test data in order to reduce both the total testing time and the memory requirements for the tester. Test-set relaxation can improve the efficiency of both test compression and test compaction. In addition, the relaxation process can identify selfinitializing test sequences for synchronous sequential circuits. In this paper, we propose an efficient test relaxation technique for synchronous sequential circuits that maximizes the number of unspecified bits while maintaining the same fault coverage as the original test set

Efficient Path Delay Test Generation with Boolean Satisfiability

This dissertation focuses on improving the accuracy and efficiency of path delay test generation using a Boolean satisfiability (SAT) solver. As part of this research, one of the most commonly used SAT solvers, MiniSat, was integrated into the path delay test generator CodGen. A mixed structural-functional approach was implemented in CodGen where longest paths were detected using the K Longest Path Per Gate (KLPG) algorithm and path justification and dynamic compaction were handled with the SAT solver. Advanced techniques were implemented in CodGen to further speed up the performance of SAT based path delay test generation using the knowledge of the circuit structure. SAT solvers are inherently circuit structure unaware, and significant speedup can be availed if structure information of the circuit is provided to the SAT solver. The advanced techniques explored include: Dynamic SAT Solving (DSS), Circuit Observability Don’t Care (Cir-ODC), SAT based static learning, dynamic learnt clause management and Approximate Observability Don’t Care (ACODC). Both ISCAS 89 and ITC 99 benchmarks as well as industrial circuits were used to demonstrate that the performance of CodGen was significantly improved with MiniSat and the use of circuit structure

A Lightweight N-Cover Algorithm For Diagnostic Fail Data Minimization

The increasing design complexity of modern ICs has made it extremely difficult and expensive to test them comprehensively. As the transistor count and density of circuits increase, a large volume of fail data is collected by the tester for a single failing IC. The diagnosis procedure analyzes this fail data to give valuable information about the possible defects that may have caused the circuit to fail. However, without any feedback from the diagnosis procedure, the tester may often collect fail data which is potentially not useful for identifying the defects in the failing circuit. This not only consumes tester memory but also increases tester data logging time and diagnosis run time. In this work, we present an algorithm to minimize the amount of fail data used for high quality diagnosis of the failing ICs. The developed algorithm analyzes outputs at which the tests failed and determines which failing tests can be eliminated from the fail data without compromising diagnosis accuracy. The proposed algorithm is used as a preprocessing step between the tester data logs and the diagnosis procedure. The performance of the algorithm was evaluated using fail data from industry manufactured ICs. Experiments demonstrate that on average, 43% of fail data was eliminated by our algorithm while maintaining an average diagnosis accuracy of 93%. With this reduction in fail data, the diagnosis speed was also increased by 46%