NOSS/ALDCS analysis and system requirements definition

The results of system analyses and implementation studies of an advanced location and data collection system (ALDCS) , proposed for inclusion on the National Oceanic Satellite System (NOSS) spacecraft are reported. The system applies Doppler processing and radiofrequency interferometer position location technqiues both alone and in combination. Aspects analyzed include: the constraints imposed by random access to the system by platforms, the RF link parameters, geometric concepts of position and velocity estimation by the two techniques considered, and the effects of electrical measurement errors, spacecraft attitude errors, and geometric parameters on estimation accuracy. Hardware techniques and trade-offs for interferometric phase measurement, ambiguity resolution and calibration are considered. A combined Doppler-interferometer ALDCS intended to fulfill the NOSS data validation and oceanic research support mission is also described

A development study for a short range, low capacity digital microwave link

Includes bibliographical references.A specific request for development of a short-range, low capacity digital microwave transmission system has been received from the South African Dept. Posts and Telecommunications. The aim of this project is to initiate development work by determining the optimum system configuration and modulation technique to meet the design specifications. In addition, it is proposed to develop and construct an I.F. modulator/demodulator module using which simulation tests chosen modulation application may be performed in order to assess the scheme's feasibi1ity in this specific application

Investigation into PRS-precoded, constant-envelope, continuous-phase digital modulation schemes

Bibliography: leaves 78-79.Partial response signaling ( PRS) has been used successfully to improve the spectral properties of Pulse Amplitude Modulated (PAM) digital transmission systems. This thesis investigation studied the effect of PRS on frequency- and phase-modulated carrier systems, in particular on their spectral performance and their maintenance of constant envelope

Synchronisation in sampled receivers for narrowband digital modulation schemes.

SIGLEAvailable from British Library Document Supply Centre- DSC:DXN0033576 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Costas PLL Loop System for BPSK Detection

A 2GHz carrier recovery Costas Loop based BPSK detector is designed using CMOS 0.18μm technology. The designed BPSK detector consists of single to differential conversion circuit, phase/frequency detector, Voltage Controlled Oscillator, differential to single conversion circuit, first order loop filter and a third multiplier. Different architectures available for each block have been discussed along with the design methodology adopted. The schematics were simulated in analog design environment. The Costas loop presented in this work can sense both 0° and 180° phases at its input. Thus the Costas loop carrier recovery circuit overcomes the 180° phase ambiguity presented by the conventional PLL. The designed Costas loop for BPSK detection is able to detect and demodulate data rates up to 50Mbps. The loop can track with in the VCO frequency range of 1.99GHz to 2.01GHz. The lock range achieved for this loop is 20MHz. The power consumption of the Costas Loop BPSK detector was found to be 144mw

A study of the minimum shift keying modulation scheme

This thesis concerns itself with the study of the Minimum Shift Keying (MSK) modulation scheme. The aspects considered are its operation under non-linear conditions as well as an investigation into the hardware implementation of both coherent and non-coherent MSK modems. The literature on digital data transmission and MSK in particular is surveyed, and a comprehensive theoretical description of MSK is given. In addition, papers on the operation of MSK under non-linear conditions were studied, and their major findings are presented. Due to the lack of theory on the effects of incorrect modulation index on the error performance of MSK, an investigation into this avenue was performed. The design of a correction mechanism for maintaining the modulation index at its correct value is described, and aspects of its implementation are considered. Using the available literature, various modules of which a coherent MSK modem is comprised were developed, and their design is discussed. The design of a non-coherent MSK demodulator is also described

Strategies for Devising Automatic Signal Recognition Algorithms in a Shared Radio Environment

In an increasingly congested and complex radio environment interference is to be expected, which poses problems for Automatic Signal Recognition (ASR) systems. This thesis explores strategies for improving ASR performance in the presence of interference. The thesis breaks the overall research question down into a number of subquestions and explores each of these in turn. A Phase-symmetric Cross Recurrence Plot is developed and used to show how a radio signal can be manipulated to separate information about the modulation from the information being carried. The Logarithmic Cyclic frequency Domain Profile is introduced to illustrate how a logarithmic representation can be used for analysing mixtures of signals with very different cyclic frequencies. After defining a canonical ASR system architecture, the concepts of an Ideal Feature and Interference Selectivity are introduced and applied to typical features used in ASR processing. Finally it is shown how these algorithmic developments can be combined in a Bayesian chain implementation that can accommodate a wide variety of feature extraction algorithms. It is concluded that future ASR systems will require features that can handle a wide range of signal types with much higher levels of interference selectivity if they are to achieve acceptable performance in shared spectrum bands. Intelligent segmentation is shown to be a requirement for future ASR systems unless features can be developed that have near ideal performance

Direct GMSK modulation at microwave frequencies

Congestion in the radio spectrum is forcing emerging high rate wireless communication systems into upper microwave and millimeterwave frequency bands, where transceiver hardware architectures are less mature. One way to realize a simple and elegant hardware solution for a microwave transmitter is to exploit the advantages of directly modulating the phase of the carrier signal. A modulation method requiring continuous phase control of the carrier signal over the full 360 degree range is Gaussian Minimum Shift Keying (GMSK). Unfortunately, it is very difficult to design a microwave circuit to provide linear phase control of a carrier signal over the full 360 degree range using traditional methods. A novel method of obtaining continuous, linear phase modulation of a microwave carrier signal over the full 360 degree range is proposed. This method is based on controlling a phase shifter, at a subharmonic of the desired output carrier frequency, and then using a frequency multiplier to obtain the desired output frequency. The phase shifter is designed to be highly linear over a fraction of the full 360 range. The frequency multiplier is a nonlinear circuit that shifts the frequency by *'N'. The subtle part of this nonlinear operation is that the multiplier also multiplies the instantaneous phase of the phase shifter output signal by *'N', thus expanding the linear phase shift range to the required 360 degrees. Using this nonlinear frequency multiplication principle, the modulator can readily be extended into the millimeterwave region. A prototype circuit is designed and performance results are presented for this method of carrier phase modulation at 18 GHz. The prototype circuit is realized with very simple hardware, containing only a single microwave active device. An extension to the modulator involving phase locking or injection locking of a power oscillator is also suggested for obtaining higher power modulated output signals. In addition to direct continuous phase modulation, the proposed method is also suitable for a wide variety of transceiver applications, including phase synchronization of antenna and oscillator arrays, phased array antenna beam steering, indirect frequency modulation, and ultra-small carrier frequency translation