New Method to Generate Balanced 2n-PSK STTCs

The first theoretical bases of the space-time trellis codes (STTCs) have been established by Tarokh (1998). Many STTCs have been published using several criteria proposed by Tarokh (1998) and Chen (2001) for slow and fast Rayleigh fading channels. More recently, a new class of codes called balanced codes, which contains all the best STTCs has been presented by Ngo (2007, 2008). These balanced codes have the same property: if the data are generated by a binary memoryless source with equally probable symbols, the used points of the MIMO constellation are generated with the same probability. Therefore, the systematic search for the best codes can be reduced to this class. Thus, the time to find the best codes is reduced. The new and general method is proposed to design balanced 2^n-PSK STTCs for several transmit antennas. This new method is simpler and faster than the previous one presented by Ngo 2007 in particular when the number of transmit antennas and n increase

Turbo-Coded Adaptive Modulation Versus Space-Time Trellis Codes for Transmission over Dispersive Channels

Decision feedback equalizer (DFE)-aided turbocoded wideband adaptive quadrature amplitude modulation (AQAM) is proposed, which is capable of combating the temporal channel quality variation of fading channels. A procedure is suggested for determining the AQAM switching thresholds and the specific turbo-coding rates capable of maintaining the target bit-error rate while aiming for achieving a highly effective bits per symbol throughput. As a design alternative, we also employ multiple-input/multiple-output DFE-aided space–time trellis codes, which benefit from transmit diversity and hence reduce the temporal channel quality fluctuations. The performance of both systems is characterized and compared when communicating over the COST 207 typical urban wideband fading channel. It was found that the turbo-coded AQAM scheme outperforms the two-transmitter space–time trellis coded system employing two receivers; although, its performance is inferior to the space–time trellis coded arrangement employing three receivers. Index Terms—Coded adaptive modulation, dispersive channels, space–time trellis codes

Space-Time Trellis and Space-Time Block Coding Versus Adaptive Modulation and Coding Aided OFDM for Wideband Channels

Abstract—The achievable performance of channel coded spacetime trellis (STT) codes and space-time block (STB) codes transmitted over wideband channels is studied in the context of schemes having an effective throughput of 2 bits/symbol (BPS) and 3 BPS. At high implementational complexities, the best performance was typically provided by Alamouti’s unity-rate G2 code in both the 2-BPS and 3-BPS scenarios. However, if a low complexity implementation is sought, the 3-BPS 8PSK space-time trellis code outperfoms the G2 code. The G2 space-time block code is also combined with symbol-by-symbol adaptive orthogonal frequency division multiplex (AOFDM) modems and turbo convolutional channel codecs for enhancing the system’s performance. It was concluded that upon exploiting the diversity effect of the G2 space-time block code, the channel-induced fading effects are mitigated, and therefore, the benefits of adaptive modulation erode. In other words, once the time- and frequency-domain fades of the wideband channel have been counteracted by the diversity-aided G2 code, the benefits of adaptive modulation erode, and hence, it is sufficient to employ fixed-mode modems. Therefore, the low-complexity approach of mitigating the effects of fading can be viewed as employing a single-transmitter, single-receiver-based AOFDM modem. By contrast, it is sufficient to employ fixed-mode OFDM modems when the added complexity of a two-transmitter G2 scheme is affordable

Burst-by-Burst Adaptive Decision Feedback Equalised TCM, TTCM and BICM for H.263-Assisted Wireless Video Telephony

Decision Feedback Equaliser (DFE) aided wideband Burst-by-Burst (BbB) Adaptive Trellis Coded Modulation (TCM), Turbo Trellis Coded Modulation (TTCM) and Bit-Interleaved Coded Modulation (BICM) assisted H.263-based video transceivers are proposed and characterised in performance terms when communicating over the COST 207 Typical Urban wideband fading channel. Specifically, four different modulation modes, namely 4QAM, 8PSK, 16QAM and 64QAM are invoked and protected by the above-mentioned coded modulation schemes. The TTCM assisted scheme was found to provide the best video performance, although at the cost of the highest complexity. A range of lower-complexity arrangements will also be characterised. Finally, in order to confirm these findings in an important practical environment, we have also investigated the adaptive TTCM scheme in the CDMA-based Universal Mobile Telecommunications System's (UMTS) Terrestrial Radio Access (UTRA) scenario and the good performance of adaptive TTCM scheme recorded when communicating over the COST 207 channels was retained in the UTRA environment

Multilevel Block Coded 8-PSK Modulations Using Unequal Error Protection Codes for the Rayleigh Fading Channel

This paper introduces new block coded 8-PSK modulations with unequal error protection (UEP) capabilities for Rayleigh fading channels. The design of efficient block coded modulations (BCM) over 8-PSK signal sets, for the specific purpose of UEP, over Rayleigh fading channels is considered. UEP is desirable in communications systems where part of the source information is more important, or error sensitive, such as the transmission of coded speech and data broadcasting. The proposed block modulation codes are based on the multilevel construction of Imai and Hirakawa (1977). It is shown that the use of binary linear UEP (LUEP) codes as component codes in one or two of the encoding levels provides, in addition to superior UEP capabilities, a higher error performance, at the expense of a very modest reduction in bandwidth efficiency, with respect to conventional multilevel codes. Computer simulation results show that, over a Rayleigh fading channel, a significant improvement in the coding gain is obtained by the use of binary LUEP codes as constituent codes in the multilevel construction

Implementable Wireless Access for B3G Networks - III: Complexity Reducing Transceiver Structures

This article presents a comprehensive overview of some of the research conducted within Mobile VCE’s Core Wireless Access Research Programme,1 a key focus of which has naturally been on MIMO transceivers. The series of articles offers a coherent view of how the work was structured and comprises a compilation of material that has been presented in detail elsewhere (see references within the article). In this article MIMO channel measurements, analysis, and modeling, which were presented previously in the first article in this series of four, are utilized to develop compact and distributed antenna arrays. Parallel activities led to research into low-complexity MIMO single-user spacetime coding techniques, as well as SISO and MIMO multi-user CDMA-based transceivers for B3G systems. As well as feeding into the industry’s in-house research program, significant extensions of this work are now in hand, within Mobile VCE’s own core activity, aiming toward securing major improvements in delivery efficiency in future wireless systems through crosslayer operation

Golden Space-Time Trellis Coded Modulation

In this paper, we present a concatenated coding scheme for a high rate $2\times 2$ multiple-input multiple-output (MIMO) system over slow fading channels. The inner code is the Golden code \cite{Golden05} and the outer code is a trellis code. Set partitioning of the Golden code is designed specifically to increase the minimum determinant. The branches of the outer trellis code are labeled with these partitions. Viterbi algorithm is applied for trellis decoding. In order to compute the branch metrics a lattice sphere decoder is used. The general framework for code optimization is given. The performance of the proposed concatenated scheme is evaluated by simulation. It is shown that the proposed scheme achieves significant performance gains over uncoded Golden code.Comment: 33 pages, 13 figure

Adaptive spatial mode of space-time and spacefrequency OFDM system over fading channels

In this paper we present a 2 transmit 1 receive (1 Tx : 1 Rx) adaptive spatial mode (ASM) of space-time (ST) and space-frequency (SF) orthogonal frequency division multiplexing (OFDM). At low signal to noise ratio (SNR) we employ ST-OFDM and switch to SF-OFDM at a certain SNR threshold. We determine this threshold from the intersection of individual performance curves. Results show a gain of 9 dB (at a bit error rate of 10-3) is achieved by employing adaptive spatial mode compared to a fixed ST-OFDM, almost 6 dB to fixed SF-OFDM, 4 dB to Coded ST-OFDM and 2 dB to a fixed coded SF-OFDM, at a delay spread of 700 ns

New 16-PSK trellis codes for fading channels

Growth in satellite mobile communications leads to increasing requirements for high data rate transmission that can be met by more efficient modulation schemes (M greater than 8). The 16-PSK trellis coded modulation technique is a very promising solution. A class of new 16-PSK trellis codes with improved error rate are designed based on the criteria on fading channels