The 1991 3rd NASA Symposium on VLSI Design

Papers from the symposium are presented from the following sessions: (1) featured presentations 1; (2) very large scale integration (VLSI) circuit design; (3) VLSI architecture 1; (4) featured presentations 2; (5) neural networks; (6) VLSI architectures 2; (7) featured presentations 3; (8) verification 1; (9) analog design; (10) verification 2; (11) design innovations 1; (12) asynchronous design; and (13) design innovations 2

Ternary to binary converter design in CMOS using multiple input floating gate MOSFETS

In this work, a ternary to binary converter circuit is designed in 0.5μm n-well CMOS technology. The circuit takes two inputs corresponding to the ternary bits and gives four outputs, which are the binary equivalent bits of the ternary inputs. The ternary inputs range from (-1,-1)3 to (1,1) 3 which are decimal -4 to 4 and the four binary output bits are the sign bit (SB), most significant bit (MSB), second significant bit (SSB) and the least significant bit (LSB). The ternary inputs (-1, 0 and 1) are represented in terms of voltages of -3V, 0V and 3V. Multiple input floating gate (MIFG) MOSFETS are used in the design of ternary to binary converter. The four circuits to generate the SB, MSB, SSB and LSB outputs are designed separately and then connected together to perform the entire conversion. The MIFG MOSFET takes multiple input signals, which are the ternary inputs in this case and calculates the weighted sum of the inputs. This weighted sum of the inputs is called floating gate voltage and is given as input to the CMOS inverter. The CMOS inverter gives a high or low binary output depending on if the floating gate voltage is higher or lower than the threshold voltage of the CMOS inverter. The circuits are simulated using MOSIS BSIM level 7 model parameters. LEDIT version 13 is used for the layout and a total of 22 transistors are used in the design of the converter circuit. The floating gate of the transistor is simulated by not giving the input directly to the gate of the transistor. Instead inputs are fed to one end of the capacitors and the other end of the capacitors are tied together and given as an input to the inverter. The converter chip occupies an area of 1140 × 2090 μm2

Center for Aeronautics and Space Information Sciences

This report summarizes the research done during 1991/92 under the Center for Aeronautics and Space Information Science (CASIS) program. The topics covered are computer architecture, networking, and neural nets

Ternary and quaternary logic to binary bit conversion CMOS integrated circuit design using multiple input floating gate MOSFETs

Multiple-input floating gate MOSFETs and floating gate potential diagrams have been used for conversion of ternary-valued input and quaternary-valued input into corresponding binary-valued output in CMOS integrated circuit design environment. The method is demonstrated through the design of a circuit for conversion of ternary inputs 00 to -1-1 (decimal 0 to -4) and 00 to 11 (decimal 0 to +4) into the corresponding binary bits and for conversion of quaternary inputs (decimal 0 to 3) into the corresponding binary bits (binary 00 to 11) in a standard 1.5 mm digital CMOS technology. The physical design of the circuits is simulated and tested with SPICE using MOSIS BSIM3 model parameters. The conversion method is simple and compatible with the present CMOS process. The circuits could be embedded in digital CMOS VLSI design architectures. The conversion circuit for ternary inputs into corresponding binary outputs has maximum propagation delay of 8 ns with 0.1 pF simulated capacitive load. The physical layout design occupies an area of 432´908 mm2. The conversion circuit for quaternary inputs to corresponding binary outputs has maximum propagation delay of 6 ns with 0.1 pF simulated capacitive load. The physical layout design occupies an area of 130´175 mm2. The conversion circuit achieved significant improvement in the number of devices. A reduction of more than 75% in transistor count was obtained over the previous designs. Measurements of the fabricated devices for the conversion of quaternary input into binary output agree with simulated values

34th Midwest Symposium on Circuits and Systems-Final Program

Organized by the Naval Postgraduate School Monterey California. Cosponsored by the IEEE Circuits and Systems Society. Symposium Organizing Committee: General Chairman-Sherif Michael, Technical Program-Roberto Cristi, Publications-Michael Soderstrand, Special Sessions- Charles W. Therrien, Publicity: Jeffrey Burl, Finance: Ralph Hippenstiel, and Local Arrangements: Barbara Cristi