920 research outputs found
AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing
The enormous success of advanced wireless devices is pushing the demand for
higher wireless data rates. Denser spectrum reuse through the deployment of
more access points per square mile has the potential to successfully meet the
increasing demand for more bandwidth. In theory, the best approach to density
increase is via distributed multiuser MIMO, where several access points are
connected to a central server and operate as a large distributed multi-antenna
access point, ensuring that all transmitted signal power serves the purpose of
data transmission, rather than creating "interference." In practice, while
enterprise networks offer a natural setup in which distributed MIMO might be
possible, there are serious implementation difficulties, the primary one being
the need to eliminate phase and timing offsets between the jointly coordinated
access points.
In this paper we propose AirSync, a novel scheme which provides not only time
but also phase synchronization, thus enabling distributed MIMO with full
spatial multiplexing gains. AirSync locks the phase of all access points using
a common reference broadcasted over the air in conjunction with a Kalman filter
which closely tracks the phase drift. We have implemented AirSync as a digital
circuit in the FPGA of the WARP radio platform. Our experimental testbed,
comprised of two access points and two clients, shows that AirSync is able to
achieve phase synchronization within a few degrees, and allows the system to
nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC
and higher layer aspects of a practical deployment. To the best of our
knowledge, AirSync offers the first ever realization of the full multiuser MIMO
gain, namely the ability to increase the number of wireless clients linearly
with the number of jointly coordinated access points, without reducing the per
client rate.Comment: Submitted to Transactions on Networkin
Distributed multi-user MIMO transmission using real-time sigma-delta-over-fiber for next generation fronthaul interface
To achieve the massive device connectivity and high data rate demanded by 5G, wireless transmission with wider signal bandwidths and higher-order multiple-input multiple-output (MIMO) is inevitable. This work demonstrates a possible function split option for the next generation fronthaul interface (NGFI). The proof-of-concept downlink architecture consists of real-time sigma-delta modulated signal over fiber (SDoF) links in combination with distributed multi-user (MU) MIMO transmission. The setup is fully implemented using off-the-shelf and in-house developed components. A single SDoF link achieves an error vector magnitude (EVM) of 3.14% for a 163.84 MHz-bandwidth 256-QAM OFDM signal (958.64 Mbps) with a carrier frequency around 3.5 GHz transmitted over 100 m OM4 multi-mode fiber at 850 nm using a commercial QSFP module. The centralized architecture of the proposed setup introduces no frequency asynchronism among remote radio units. For most cases, the 2 x 2 MU-MIMO transmission has little performance degradation compared to SISO, 0.8 dB EVM degradation for 40.96 MHz-bandwidth signals and 1.4 dB for 163.84 MHz-bandwidth on average, implying that the wireless spectral efficiency almost doubles by exploiting spatial multiplexing. A 1.4 Gbps data rate (720 Mbps per user, 163.84 MHz-bandwidth, 64-QAM) is reached with an average EVM of 6.66%. The performance shows that this approach is feasible for the high-capacity hot-spot scenario
Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years
Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions
Linear Transmit-Receive Strategies for Multi-user MIMO Wireless Communications
Die Notwendigkeit zur Unterdrueckung von Interferenzen auf der einen Seite
und zur Ausnutzung der durch Mehrfachzugriffsverfahren erzielbaren Gewinne
auf der anderen Seite rueckte die raeumlichen Mehrfachzugriffsverfahren
(Space Division Multiple Access, SDMA) in den Fokus der Forschung. Ein
Vertreter der raeumlichen Mehrfachzugriffsverfahren, die lineare
Vorkodierung, fand aufgrund steigender Anzahl an Nutzern und Antennen in
heutigen und zukuenftigen Mobilkommunikationssystemen besondere Beachtung,
da diese Verfahren das Design von Algorithmen zur Vorcodierung
vereinfachen. Aus diesem Grund leistet diese Dissertation einen Beitrag zur
Entwicklung linearer Sende- und Empfangstechniken fuer MIMO-Technologie mit
mehreren Nutzern. Zunaechst stellen wir ein Framework zur Approximation des
Datendurchsatzes in Broadcast-MIMO-Kanaelen mit mehreren Nutzern vor. In
diesem Framework nehmen wir das lineare Vorkodierverfahren regularisierte
Blockdiagonalisierung (RBD) an. Durch den Vergleich von Dirty Paper Coding
(DPC) und linearen Vorkodieralgorithmen (z.B. Zero Forcing (ZF) und
Blockdiagonalisierung (BD)) ist es uns moeglich, untere und obere Schranken
fuer den Unterschied bezueglich Datenraten und bezueglich Leistung zwischen
beiden anzugeben. Im Weiteren entwickeln wir einen Algorithmus fuer
koordiniertes Beamforming (Coordinated Beamforming, CBF), dessen Loesung
sich in geschlossener Form angeben laesst. Dieser CBF-Algorithmus basiert
auf der SeDJoCo-Transformation und loest bisher vorhandene Probleme im
Bereich CBF. Im Anschluss schlagen wir einen iterativen CBF-Algorithmus
namens FlexCoBF (flexible coordinated beamforming) fuer
MIMO-Broadcast-Kanaele mit mehreren Nutzern vor. Im Vergleich mit bis dato
existierenden iterativen CBF-Algorithmen kann als vielversprechendster
Vorteil die freie Wahl der linearen Sende- und Empfangsstrategie
herausgestellt werden. Das heisst, jede existierende Methode der linearen
Vorkodierung kann als Sendestrategie genutzt werden, waehrend die Strategie
zum Empfangsbeamforming frei aus MRC oder MMSE gewaehlt werden darf. Im
Hinblick auf Szenarien, in denen Mobilfunkzellen in Clustern
zusammengefasst sind, erweitern wir FlexCoBF noch weiter. Hier wurde das
Konzept der koordinierten Mehrpunktverbindung (Coordinated Multipoint
(CoMP) transmission) integriert. Zuletzt stellen wir drei Moeglichkeiten
vor, Kanalzustandsinformationen (Channel State Information, CSI) unter
verschiedenen Kanalumstaenden zu erlangen. Die Qualitaet der
Kanalzustandsinformationen hat einen starken Einfluss auf die Guete des
Uebertragungssystems. Die durch unsere neuen Algorithmen erzielten
Verbesserungen haben wir mittels numerischer Simulationen von Summenraten
und Bitfehlerraten belegt.In order to combat interference and exploit large multiplexing gains of the
multi-antenna systems, a particular interest in spatial division multiple
access (SDMA) techniques has emerged. Linear precoding techniques, as one
of the SDMA strategies, have obtained more attention due to the fact that
an increasing number of users and antennas involved into the existing and
future mobile communication systems requires a simplification of the
precoding design. Therefore, this thesis contributes to the design of
linear transmit and receive strategies for multi-user MIMO broadcast
channels in a single cell and clustered multiple cells. First, we present a
throughput approximation framework for multi-user MIMO broadcast channels
employing regularized block diagonalization (RBD) linear precoding.
Comparing dirty paper coding (DPC) and linear precoding algorithms (e.g.,
zero forcing (ZF) and block diagonalization (BD)), we further quantify
lower and upper bounds of the rate and power offset between them as a
function of the system parameters such as the number of users and antennas.
Next, we develop a novel closed-form coordinated beamforming (CBF)
algorithm (i.e., SeDJoCo based closed-form CBF) to solve the existing open
problem of CBF. Our new algorithm can support a MIMO system with an
arbitrary number of users and transmit antennas. Moreover, the application
of our new algorithm is not only for CBF, but also for blind source
separation (BSS), since the same mathematical model has been used in BSS
application.Then, we further propose a new iterative CBF algorithm (i.e.,
flexible coordinated beamforming (FlexCoBF)) for multi-user MIMO broadcast
channels. Compared to the existing iterative CBF algorithms, the most
promising advantage of our new algorithm is that it provides freedom in the
choice of the linear transmit and receive beamforming strategies, i.e., any
existing linear precoding method can be chosen as the transmit strategy and
the receive beamforming strategy can be flexibly chosen from MRC or MMSE
receivers. Considering clustered multiple cell scenarios, we extend the
FlexCoBF algorithm further and introduce the concept of the coordinated
multipoint (CoMP) transmission. Finally, we present three strategies for
channel state information (CSI) acquisition regarding various channel
conditions and channel estimation strategies. The CSI knowledge is required
at the base station in order to implement SDMA techniques. The quality of
the obtained CSI heavily affects the system performance. The performance
enhancement achieved by our new strategies has been demonstrated by
numerical simulation results in terms of the system sum rate and the bit
error rate
Preamble design using embedded signalling for OFDM broadcast systems based on reduced-complexity distance detection
The second generation digital terrestrial television broadcasting standard (DVB-T2) adopts the so-called P1 symbol as the preamble for initial synchronization. The P1 symbol also carries a number of basic transmission parameters, including the fast Fourier transform size and the single-input/single-output as well as multiple-input/single-output mode, in order to appropriately configure the receiver for carrying out the subsequent processing. In this contribution, an improved preamble design is proposed, where a pair of training sequences is inserted in the frequency domain and their distance is used for transmission parameter signalling. At the receiver, only a low-complexity correlator is required for the detection of the signalling. Both the coarse carrier frequency offset and the signalling can be simultaneously estimated by detecting the above-mentioned correlation. Compared to the standardised P1 symbol, the proposed preamble design significantly reduces the complexity of the receiver while retaining high robustness in frequency-selective fading channels. Furthermore, we demonstrate that the proposed preamble design achieves a better signalling performance than the standardised P1 symbol, despite reducing the numbers of multiplications and additions by about 40% and 20%, respectively
LTE-verkon suorituskyvyn parantaminen CDMA2000:sta LTE:hen tehdyn muutoksen jälkeen
CDMA2000 technology has been widely used on 450 MHz band. Recently the equipment availability and improved performance offered by LTE has started driving the operators to migrate their networks from CDMA2000 to LTE. The migration may cause the network performance to be in suboptimal state.
This thesis presents four methods to positively influence LTE network performance after CDMA2000 to LTE migration, especially on 450 MHz band. Furthermore, three of the four presented methods are evaluated in a live network. The measured three methods were cyclic prefix length, handover parameter optimization and uplink coordinated multipoint (CoMP) transmission. The objective was to determine the effectiveness of each method. The research methods included field measurements and network KPI collection.
The results show that normal cyclic prefix length is enough for LTE450 although the cell radius may be up to 50km. Only special cases exist where cyclic prefix should be extended. Operators should consider solving such problems individually instead of widely implementing extended cyclic prefix.
Handover parameter optimization turned out to be an important point of attention after CDMA2000 to LTE migration. It was observed that if the handover parameters are not concerned, significant amount of unnecessary handovers may happen. It was evaluated that about 50% of the handovers in the network were unnecessary in the initial situation. By adjusting the handover parameter values 47,28 % of the handovers per user were removed and no negative effects were detected.
Coordinated multipoint transmission has been widely discussed to be an effective way to improve LTE network performance, especially at the cell edges. Many challenges must be overcome before it can be applied to downlink. Also, implementing it to function between cells in different eNBs involve challenges. Thus, only intra-site uplink CoMP transmission was tested. The results show that the performance improvements were significant at the cell edges as theory predicted.CDMA2000 teknologiaa on laajalti käytetty 450 MHz:n taajuusalueella. Viime aikoina LTE:n tarjoamat halvemmat laitteistot ja parempi suorituskyky ovat kannustaneet operaattoreita muuttamaan verkkoaan CDMA2000:sta LTE:hen. Kyseinen muutos saattaa johtaa epäoptimaaliseen tilaan verkon suorituskyvyn kannalta.
Tämä työ esittelee neljä menetelmää, joilla voidaan positiivisesti vaikuttaa LTE-verkon suorituskykyyn CDMA2000:ste LTE:hen tehdyn muutoksen jälkeen erityisesti 450 MHz:n taajuusalueella. Kolmea näistä menetelmistä arvioidaan tuotantoverkossa. Nämä kolme menetelmää ovat suojavälin pituus, solunvaihtoparametrien optimointi ja ylälinkin koordinoitu monipistetiedonsiirto. Tavoite oli määrittää kunkin menetelmän vaikutus. Tutkimusmenetelmiin kuului kenttämittaukset ja verkon suorituskykymittareiden analyysi.
Tutkimustulosten perusteella voidaan sanoa, että normaali suojaväli on riittävän pitkä LTE450:lle vaikka solujen säde on jopa 50km. Vain erikoistapauksissa tarvitaan pidennettyä suojaväliä. Operaattoreiden tulisi ratkaista tällaiset tapaukset yksilöllisesti sen sijaan, että koko verkossa käytettäisiin pidennettyä suojaväliä.
Solunvaihtoparametrien optimointi osoittautui tärkeäksi huomion aiheeksi CDMA2000:sta LTE:hen tehdyn muutoksen jälkeen. Turhia solunvaihtoja saattaa tapahtua merkittäviä määriä, mikäli parametreihin ei kiinnitetä huomiota. Lähtötilanteessa noin 50 % testiverkon solunvaihdoista arvioitiin olevan turhia. Solunvaihtoparametreja muuttamalla 47,28 % solunvaihdoista per käyttäjä saatiin poistettua ilman, että mitään haittavaikutuksia olisi huomattu.
Koordinoidun monipistetiedonsiirron on laajalti sanottu olevan tehokas tapa parantaa LTE-verkon suorituskykyä, etenkin solujen reunoilla. Monia haasteita pitää ratkaista, enne kuin sitä voidaan käyttää alalinkin tiedonsiirtoon. Lisäksi sen käyttöön eri tukiasemien solujen välillä liittyy haasteita. Tästä syystä monipistetiedonsiirtoa voitiin testata vain ylälinkin suuntaan ja vain yhden tukiaseman välisten solujen kesken. Tulokset osoittivat, että suorituskyky parani merkittävästi solun reunalla
Fundamental Limits of Cooperation
Cooperation is viewed as a key ingredient for interference management in
wireless systems. This paper shows that cooperation has fundamental
limitations. The main result is that even full cooperation between transmitters
cannot in general change an interference-limited network to a noise-limited
network. The key idea is that there exists a spectral efficiency upper bound
that is independent of the transmit power. First, a spectral efficiency upper
bound is established for systems that rely on pilot-assisted channel
estimation; in this framework, cooperation is shown to be possible only within
clusters of limited size, which are subject to out-of-cluster interference
whose power scales with that of the in-cluster signals. Second, an upper bound
is also shown to exist when cooperation is through noncoherent communication;
thus, the spectral efficiency limitation is not a by-product of the reliance on
pilot-assisted channel estimation. Consequently, existing literature that
routinely assumes the high-power spectral efficiency scales with the log of the
transmit power provides only a partial characterization. The complete
characterization proposed in this paper subdivides the high-power regime into a
degrees-of-freedom regime, where the scaling with the log of the transmit power
holds approximately, and a saturation regime, where the spectral efficiency
hits a ceiling that is independent of the power. Using a cellular system as an
example, it is demonstrated that the spectral efficiency saturates at power
levels of operational relevance.Comment: 27 page
- …