3,514 research outputs found
Experimental Evaluation of Large Scale WiFi Multicast Rate Control
WiFi multicast to very large groups has gained attention as a solution for
multimedia delivery in crowded areas. Yet, most recently proposed schemes do
not provide performance guarantees and none have been tested at scale. To
address the issue of providing high multicast throughput with performance
guarantees, we present the design and experimental evaluation of the Multicast
Dynamic Rate Adaptation (MuDRA) algorithm. MuDRA balances fast adaptation to
channel conditions and stability, which is essential for multimedia
applications. MuDRA relies on feedback from some nodes collected via a
light-weight protocol and dynamically adjusts the rate adaptation response
time. Our experimental evaluation of MuDRA on the ORBIT testbed with over 150
nodes shows that MuDRA outperforms other schemes and supports high throughput
multicast flows to hundreds of receivers while meeting quality requirements.
MuDRA can support multiple high quality video streams, where 90% of the nodes
report excellent or very good video quality
Quality of Service over Specific Link Layers: state of the art report
The Integrated Services concept is proposed as an enhancement to the current Internet architecture, to provide a better Quality of Service (QoS) than that provided by the traditional Best-Effort service. The features of the Integrated Services are explained in this report. To support Integrated Services, certain requirements are posed on the underlying link layer. These requirements are studied by the Integrated Services over Specific Link Layers (ISSLL) IETF working group. The status of this ongoing research is reported in this document. To be more specific, the solutions to provide Integrated Services over ATM, IEEE 802 LAN technologies and low-bitrate links are evaluated in detail. The ISSLL working group has not yet studied the requirements, that are posed on the underlying link layer, when this link layer is wireless. Therefore, this state of the art report is extended with an identification of the requirements that are posed on the underlying wireless link, to provide differentiated Quality of Service
An Overview of Mobile Ad Hoc Networks for the Existing Protocols and Applications
Mobile Ad Hoc Network (MANET) is a collection of two or more devices or nodes
or terminals with wireless communications and networking capability that
communicate with each other without the aid of any centralized administrator
also the wireless nodes that can dynamically form a network to exchange
information without using any existing fixed network infrastructure. And it's
an autonomous system in which mobile hosts connected by wireless links are free
to be dynamically and some time act as routers at the same time, and we discuss
in this paper the distinct characteristics of traditional wired networks,
including network configuration may change at any time, there is no direction
or limit the movement and so on, and thus needed a new optional path Agreement
(Routing Protocol) to identify nodes for these actions communicate with each
other path, An ideal choice way the agreement should not only be able to find
the right path, and the Ad Hoc Network must be able to adapt to changing
network of this type at any time. and we talk in details in this paper all the
information of Mobile Ad Hoc Network which include the History of ad hoc,
wireless ad hoc, wireless mobile approaches and types of mobile ad Hoc
networks, and then we present more than 13 types of the routing Ad Hoc Networks
protocols have been proposed. In this paper, the more representative of routing
protocols, analysis of individual characteristics and advantages and
disadvantages to collate and compare, and present the all applications or the
Possible Service of Ad Hoc Networks.Comment: 24 Pages, JGraph-Hoc Journa
Spectrum Sharing in Wireless Networks via QoS-Aware Secondary Multicast Beamforming
Secondary spectrum usage has the potential to considerably increase spectrum utilization. In this paper, quality-of-service (QoS)-aware spectrum underlay of a secondary multicast network is considered. A multiantenna secondary access point (AP) is used for multicast (common information) transmission to a number of secondary single-antenna receivers. The idea is that beamforming can be used to steer power towards the secondary receivers while limiting sidelobes that cause interference to primary receivers. Various optimal formulations of beamforming are proposed, motivated by different ldquocohabitationrdquo scenarios, including robust designs that are applicable with inaccurate or limited channel state information at the secondary AP. These formulations are NP-hard computational problems; yet it is shown how convex approximation-based multicast beamforming tools (originally developed without regard to primary interference constraints) can be adapted to work in a spectrum underlay context. Extensive simulation results demonstrate the effectiveness of the proposed approaches and provide insights on the tradeoffs between different design criteria
Wireless broadband access: WiMAX and beyond - Investigation of bandwidth request mechanisms under point-to-multipoint mode of WiMAX networks
The WiMAX standard specifies a metropolitan area broadband wireless access air interface. In order to support QoS for multimedia applications, various bandwidth request and scheduling mechanisms are suggested in WiMAX, in which a subscriber station can send request messages to a base station, and the base station can grant or reject the request according to the available radio resources. This article first compares two fundamental bandwidth request mechanisms specified in the standard, random access vs. polling under the point-to-multipoint mode, a mandatory transmission mode. Our results demonstrate that random access outperforms polling when the request rate is low. However, its performance degrades significantly when the channel is congested. Adaptive switching between random access and polling according to load can improve system performance. We also investigate the impact of channel noise on the random access request mechanism
Software Defined Networks based Smart Grid Communication: A Comprehensive Survey
The current power grid is no longer a feasible solution due to
ever-increasing user demand of electricity, old infrastructure, and reliability
issues and thus require transformation to a better grid a.k.a., smart grid
(SG). The key features that distinguish SG from the conventional electrical
power grid are its capability to perform two-way communication, demand side
management, and real time pricing. Despite all these advantages that SG will
bring, there are certain issues which are specific to SG communication system.
For instance, network management of current SG systems is complex, time
consuming, and done manually. Moreover, SG communication (SGC) system is built
on different vendor specific devices and protocols. Therefore, the current SG
systems are not protocol independent, thus leading to interoperability issue.
Software defined network (SDN) has been proposed to monitor and manage the
communication networks globally. This article serves as a comprehensive survey
on SDN-based SGC. In this article, we first discuss taxonomy of advantages of
SDNbased SGC.We then discuss SDN-based SGC architectures, along with case
studies. Our article provides an in-depth discussion on routing schemes for
SDN-based SGC. We also provide detailed survey of security and privacy schemes
applied to SDN-based SGC. We furthermore present challenges, open issues, and
future research directions related to SDN-based SGC.Comment: Accepte
Recommended from our members
Interoperability of wireless communication technologies in hybrid networks: Evaluation of end-to-end interoperability issues and quality of service requirements
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Hybrid Networks employing wireless communication technologies have nowadays brought closer the vision of communication “anywhere, any time with anyone”. Such communication technologies consist of various standards, protocols, architectures, characteristics, models, devices, modulation and coding techniques. All these different technologies naturally may share some common characteristics, but there are also many important differences. New advances in these technologies are emerging very rapidly, with the advent of new models, characteristics, protocols and architectures. This rapid evolution imposes many challenges and issues to be addressed, and of particular importance are the interoperability issues of the following wireless technologies: Wireless Fidelity (Wi-Fi) IEEE802.11, Worldwide Interoperability for Microwave Access (WiMAX) IEEE 802.16, Single Channel per Carrier (SCPC), Digital Video Broadcasting of Satellite (DVB-S/DVB-S2), and Digital Video Broadcasting Return Channel through Satellite (DVB-RCS). Due to the differences amongst wireless technologies, these technologies do not generally interoperate easily with each other because of various interoperability and Quality of Service (QoS) issues.
The aim of this study is to assess and investigate end-to-end interoperability issues and QoS requirements, such as bandwidth, delays, jitter, latency, packet loss, throughput, TCP performance, UDP performance, unicast and multicast services and availability, on hybrid wireless communication networks (employing both satellite broadband and terrestrial wireless technologies).
The thesis provides an introduction to wireless communication technologies followed by a review of previous research studies on Hybrid Networks (both satellite and terrestrial wireless technologies, particularly Wi-Fi, WiMAX, DVB-RCS, and SCPC). Previous studies have discussed Wi-Fi, WiMAX, DVB-RCS, SCPC and 3G technologies and their standards as well as their properties and characteristics, such as operating frequency, bandwidth, data rate, basic configuration, coverage, power, interference, social issues, security problems, physical and MAC layer design and development issues. Although some previous studies provide valuable contributions to this area of research, they are limited to link layer characteristics, TCP performance, delay, bandwidth, capacity, data rate, and throughput. None of the studies cover all aspects of end-to-end interoperability issues and QoS requirements; such as bandwidth, delay, jitter, latency, packet loss, link performance, TCP and UDP performance, unicast and multicast performance, at end-to-end level, on Hybrid wireless networks.
Interoperability issues are discussed in detail and a comparison of the different technologies and protocols was done using appropriate testing tools, assessing various performance measures including: bandwidth, delay, jitter, latency, packet loss, throughput and availability testing. The standards, protocol suite/ models and architectures for Wi-Fi, WiMAX, DVB-RCS, SCPC, alongside with different platforms and applications, are discussed and compared. Using a robust approach, which includes a new testing methodology and a generic test plan, the testing was conducted using various realistic test scenarios on real networks, comprising variable numbers and types of nodes. The data, traces, packets, and files were captured from various live scenarios and sites. The test results were analysed in order to measure and compare the characteristics of wireless technologies, devices, protocols and applications.
The motivation of this research is to study all the end-to-end interoperability issues and Quality of Service requirements for rapidly growing Hybrid Networks in a comprehensive and systematic way.
The significance of this research is that it is based on a comprehensive and systematic investigation of issues and facts, instead of hypothetical ideas/scenarios or simulations, which informed the design of a test methodology for empirical data gathering by real network testing, suitable for the measurement of hybrid network single-link or end-to-end issues using proven test tools.
This systematic investigation of the issues encompasses an extensive series of tests measuring delay, jitter, packet loss, bandwidth, throughput, availability, performance of audio and video session, multicast and unicast performance, and stress testing. This testing covers most common test scenarios in hybrid networks and gives recommendations in achieving good end-to-end interoperability and QoS in hybrid networks.
Contributions of study include the identification of gaps in the research, a description of interoperability issues, a comparison of most common test tools, the development of a generic test plan, a new testing process and methodology, analysis and network design recommendations for end-to-end interoperability issues and QoS requirements. This covers the complete cycle of this research.
It is found that UDP is more suitable for hybrid wireless network as compared to TCP, particularly for the demanding applications considered, since TCP presents significant problems for multimedia and live traffic which requires strict QoS requirements on delay, jitter, packet loss and bandwidth. The main bottleneck for satellite communication is the delay of approximately 600 to 680 ms due to the long distance factor (and the finite speed of light) when communicating over geostationary satellites.
The delay and packet loss can be controlled using various methods, such as traffic classification, traffic prioritization, congestion control, buffer management, using delay compensator, protocol compensator, developing automatic request technique, flow scheduling, and bandwidth allocation
Ethernet - a survey on its fields of application
During the last decades, Ethernet progressively became the most widely used local area networking (LAN) technology. Apart from LAN installations, Ethernet became also attractive for many other fields of application, ranging from industry to avionics, telecommunication, and multimedia. The expanded application of this technology is mainly due to its significant assets like reduced cost, backward-compatibility, flexibility, and expandability. However, this new trend raises some problems concerning the services of the protocol and the requirements for each application. Therefore, specific adaptations prove essential to integrate this communication technology in each field of application. Our primary objective is to show how Ethernet has been enhanced to comply with the specific requirements of several application fields, particularly in transport, embedded and multimedia contexts. The paper first describes the common Ethernet LAN technology and highlights its main features. It reviews the most important specific Ethernet versions with respect to each application field’s requirements. Finally, we compare these different fields of application and we particularly focus on the fundamental concepts and the quality of service capabilities of each proposal
- …