3,597 research outputs found
RISE-Based Integrated Motion Control of Autonomous Ground Vehicles With Asymptotic Prescribed Performance
This article investigates the integrated lane-keeping and roll control for autonomous ground vehicles (AGVs) considering the transient performance and system disturbances. The robust integral of the sign of error (RISE) control strategy is proposed to achieve the lane-keeping control purpose with rollover prevention, by guaranteeing the asymptotic stability of the closed-loop system, attenuating systematic disturbances, and maintaining the controlled states within the prescribed performance boundaries. Three contributions have been made in this article: 1) a new prescribed performance function (PPF) that does not require accurate initial errors is proposed to guarantee the tracking errors restricted within the predefined asymptotic boundaries; 2) a modified neural network (NN) estimator which requires fewer adaptively updated parameters is proposed to approximate the unknown vertical dynamics; and 3) the improved RISE control based on PPF is proposed to achieve the integrated control objective, which analytically guarantees both the controller continuity and closed-loop system asymptotic stability by integrating the signum error function. The overall system stability is proved with the Lyapunov function. The controller effectiveness and robustness are finally verified by comparative simulations using two representative driving maneuvers, based on the high-fidelity CarSim-Simulink simulation
Recommended from our members
Development of Eco-Friendly Ramp Control for Connected and Automated Electric Vehicles
With on-board sensors such as camera, radar, and Lidar, connected and automated vehicles (CAVs) can sense the surrounding environment and be driven autonomously and safely by themselves without colliding into other objects on the road. CAVs are also able to communicate with each other and roadside infrastructure via vehicle-to-vehicle and vehicle-to-infrastructure communications, respectively, sharing information on the vehiclesâ states, signal phase and timing (SPaT) information, enabling CAVs to make decisions in a collaborative manner. As a typical scenario, ramp control attracts wide attention due to the concerns of safety and mobility in the merging area. In particular, if the line-of-the-sight is blocked (because of grade separation), then neither mainline vehicles nor on-ramp vehicles may well adapt their own dynamics to perform smoothed merging maneuvers. This may lead to speed fluctuations or even shockwave propagating upstream traffic along the corridor, thus potentially increasing the traffic delays and excessive energy consumption. In this project, the research team proposed a hierarchical ramp merging system that not only allowed microscopic cooperative maneuvers for connected and automated electric vehicles on the ramp to merge into mainline traffic flow, but also had controllability of ramp inflow rate, which enabled macroscopic traffic flow control. A centralized optimal control-based approach was proposed to both smooth the merging flow and improve the system-wide mobility of the network. Linear quadratic trackers in both finite horizon and receding horizon forms were developed to solve the optimization problem in terms of path planning and sequence determination, and a microscopic electric vehicle (EV) energy consumption model was applied to estimate the energy consumption. The simulation results confirmed that under the regulated inflow rate, the proposed system was able to avoid potential traffic congestion and improve the mobility (in terms of average speed) as much as 115%, compared to the conventional ramp metering and the ramp without any control approach. Interestingly, for EVs (connected and automated EVs in this study), the improved mobility may not necessarily result in the reduction of energy consumption. The âsweet spotâ of average speed ranges from 27â34 mph for the EV models in this study.View the NCST Project Webpag
Vision-Based Lane-Changing Behavior Detection Using Deep Residual Neural Network
Accurate lane localization and lane change detection are crucial in advanced
driver assistance systems and autonomous driving systems for safer and more
efficient trajectory planning. Conventional localization devices such as Global
Positioning System only provide road-level resolution for car navigation, which
is incompetent to assist in lane-level decision making. The state of art
technique for lane localization is to use Light Detection and Ranging sensors
to correct the global localization error and achieve centimeter-level accuracy,
but the real-time implementation and popularization for LiDAR is still limited
by its computational burden and current cost. As a cost-effective alternative,
vision-based lane change detection has been highly regarded for affordable
autonomous vehicles to support lane-level localization. A deep learning-based
computer vision system is developed to detect the lane change behavior using
the images captured by a front-view camera mounted on the vehicle and data from
the inertial measurement unit for highway driving. Testing results on
real-world driving data have shown that the proposed method is robust with
real-time working ability and could achieve around 87% lane change detection
accuracy. Compared to the average human reaction to visual stimuli, the
proposed computer vision system works 9 times faster, which makes it capable of
helping make life-saving decisions in time
The State-of-the-art of Coordinated Ramp Control with Mixed Traffic Conditions
Ramp metering, a traditional traffic control strategy for conventional
vehicles, has been widely deployed around the world since the 1960s. On the
other hand, the last decade has witnessed significant advances in connected and
automated vehicle (CAV) technology and its great potential for improving
safety, mobility and environmental sustainability. Therefore, a large amount of
research has been conducted on cooperative ramp merging for CAVs only. However,
it is expected that the phase of mixed traffic, namely the coexistence of both
human-driven vehicles and CAVs, would last for a long time. Since there is
little research on the system-wide ramp control with mixed traffic conditions,
the paper aims to close this gap by proposing an innovative system architecture
and reviewing the state-of-the-art studies on the key components of the
proposed system. These components include traffic state estimation, ramp
metering, driving behavior modeling, and coordination of CAVs. All reviewed
literature plot an extensive landscape for the proposed system-wide coordinated
ramp control with mixed traffic conditions.Comment: 8 pages, 1 figure, IEEE INTELLIGENT TRANSPORTATION SYSTEMS CONFERENCE
- ITSC 201
Event-Triggered Multi-Lane Fusion Control for 2-D Vehicle Platoon Systems with Distance Constraints
This paper investigates the event-triggered fixedtime multi-lane fusion control for vehicle platoon systems with
distance keeping constraints where the vehicles are spread in
multiple lanes. To realize the fusion of vehicles in different lanes,
the vehicle platoon systems are firstly constructed with respect to
a two-dimensional (2-D) plane. In case of the collision and loss of
effective communication, the distance constraints for each vehicle
are guaranteed by a barrier function-based control strategy.
In contrast to the existing results regarding the command
filter techniques, the proposed distance keeping controller can
constrain the distance tracking error directly and the error
generated by the command filter is coped with by adaptive fuzzy
control technique. Moreover, to offset the impacts of the unknown
system dynamics and the external disturbances, an unknown
input reconstruction method with asymptotic convergence is
developed by utilizing the interval observer technique. Finally,
two relative threshold triggering mechanisms are utilized in the
proposed fixed-time multi-lane fusion controller design so as to
reduce the communication burden. The corresponding simulation
results also verify the effectiveness of the proposed strategy
A Human Driver Model for Autonomous Lane Changing in Highways: Predictive Fuzzy Markov Game Driving Strategy
This study presents an integrated hybrid solution to mandatory lane changing problem
to deal with accident avoidance by choosing a safe gap in highway driving. To manage
this, a comprehensive treatment to a lane change active safety design is proposed from
dynamics, control, and decision making aspects.
My effort first goes on driver behaviors and relating human reasoning of threat in
driving for modeling a decision making strategy. It consists of two main parts; threat assessment
in traffic participants, (TV s) states, and decision making. The first part utilizes
an complementary threat assessment of TV s, relative to the subject vehicle, SV , by evaluating
the traffic quantities. Then I propose a decision strategy, which is based on Markov
decision processes (MDPs) that abstract the traffic environment with a set of actions, transition
probabilities, and corresponding utility rewards. Further, the interactions of the TV s
are employed to set up a real traffic condition by using game theoretic approach. The question
to be addressed here is that how an autonomous vehicle optimally interacts with the
surrounding vehicles for a gap selection so that more effective performance of the overall
traffic flow can be captured. Finding a safe gap is performed via maximizing an objective
function among several candidates. A future prediction engine thus is embedded in the
design, which simulates and seeks for a solution such that the objective function is maximized
at each time step over a horizon. The combined system therefore forms a predictive
fuzzy Markov game (FMG) since it is to perform a predictive interactive driving strategy
to avoid accidents for a given traffic environment. I show the effect of interactions in decision
making process by proposing both cooperative and non-cooperative Markov game
strategies for enhanced traffic safety and mobility. This level is called the higher level
controller. I further focus on generating a driver controller to complement the automated
carâs safe driving. To compute this, model predictive controller (MPC) is utilized. The
success of the combined decision process and trajectory generation is evaluated with a set
of different traffic scenarios in dSPACE virtual driving environment.
Next, I consider designing an active front steering (AFS) and direct yaw moment control
(DYC) as the lower level controller that performs a lane change task with enhanced
handling performance in the presence of varying front and rear cornering stiffnesses. I propose
a new control scheme that integrates active front steering and the direct yaw moment
control to enhance the vehicle handling and stability. I obtain the nonlinear tire forces
with Pacejka model, and convert the nonlinear tire stiffnesses to parameter space to design
a linear parameter varying controller (LPV) for combined AFS and DYC to perform a
commanded lane change task. Further, the nonlinear vehicle lateral dynamics is modeled
with Takagi-Sugeno (T-S) framework. A state-feedback fuzzy Hâ controller is designed
for both stability and tracking reference. Simulation study confirms that the performance
of the proposed methods is quite satisfactory
Evaluation of model predictive control method for collision avoidance of automated vehicles
Indiana University-Purdue University Indianapolis (IUPUI)Collision avoidance design plays an essential role in autonomous vehicle technology.
It's an attractive research area that will need much experimentation in the
future. This research area is very important for providing the maximum safety to automated vehicles, which have to be tested several times under diFFerent circumstances
for safety before use in real life.
This thesis proposes a method for designing and presenting a collision avoidance
maneuver by using a model predictive controller with a moving obstacle for automated
vehicles. It consists of a plant model, an adaptive MPC controller, and a reference
trajectory. The proposed strategy applies a dynamic bicycle model as the plant
model, adaptive model predictive controller for the lateral control, and a custom
reference trajectory for the scenario design. The model was developed using the
Model Predictive Control Toolbox and Automated Driving Toolbox in Matlab. Builtin
tools available in Matlab/Simulink were used to verify the modeling approach and
analyze the performance of the system.
The major contribution of this thesis work was implementing a novel dynamic
obstacle avoidance control method for automated vehicles. The study used validated
parameters obtained from previous research. The novelty of this research was performing
the studies using a MPC based controller instead of a sliding mode controller,
that was primarily used in other studies. The results obtained from the study are compared
with the validated models. The comparisons consisted of the lateral overlap,
lateral error, and steering angle simulation results between the models. Additionally,
this study also included outcomes for the yaw angle. The comparisons and other outcomes obtained in this study indicated that the developed control model produced
reasonably acceptable results and recommendations for future studies
- âŠ