Low-power and high-performance SRAM design in high variability advanced CMOS technology

As process technologies shrink, the size and number of memories on a chip are exponentially increasing. Embedded SRAMs are a critical component in modern digital systems, and they strongly impact the overall power, performance, and area. To promote memory-related research in academia, this dissertation introduces OpenRAM, a flexible, portable and open-source memory compiler and characterization methodology for generating and verifying memory designs across different technologies.In addition, SRAM designs, focusing on improving power consumption, access time and bitcell stability are explored in high variability advanced CMOS technologies. To have a stable read/write operation for SRAM in high variability process nodes, a differential-ended single-port 8T bitcell is proposed that improves the read noise margin, write noise margin and readout bitcell current by 45%, 48% and 21%, respectively, compared to a conventional 6T bitcell. Also, a differential-ended single-port 12T bitcell for subthreshold operation is proposed that solves the half-select disturbance and allows efficient bit-interleaving. 12T bitcell has a leakage control mechanism which helps to reduce the power consumption and provides operation down to 0.3 V. Both 8T and 12T bitcells are analyzed in a 64 kb SRAM array using 32 nm technology. Besides, to further improve the access time and power consumption, two tracking circuits (multi replica bitline delay and reconfigurable replica bitline delay techniques) are proposed to aid the generation of accurate and optimum sense amplifier set time.An error tolerant SRAM architecture suitable for low voltage video application with dynamic power-quality management is also proposed in this dissertation. This memory uses three power supplies to improve the SRAM stability in low voltages. The proposed triple-supply approach achieves 63% improvement in image quality and 69% reduction in power consumption compared to a single-supply 64 kb SRAM array at 0.70 V

Ultra-Low-Power Embedded SRAM Design for Battery- Operated and Energy-Harvested IoT Applications

Internet of Things (IoT) devices such as wearable health monitors, augmented reality goggles, home automation, smart appliances, etc. are a trending topic of research. Various IoT products are thriving in the current electronics market. The IoT application needs such as portability, form factor, weight, etc. dictate the features of such devices. Small, portable, and lightweight IoT devices limit the usage of the primary energy source to a smaller rechargeable or non-rechargeable battery. As battery life and replacement time are critical issues in battery-operated or partially energy-harvested IoT devices, ultra-low-power (ULP) system on chips (SoC) are becoming a widespread solution of chip makers’ choice. Such ULP SoC requires both logic and the embedded static random access memory (SRAM) in the processor to operate at very low supply voltages. With technology scaling for bulk and FinFET devices, logic has demonstrated to operate at low minimum operating voltages (VMIN). However, due to process and temperature variation, SRAMs have higher VMIN in scaled processes that become a huge problem in designing ULP SoC cores. This chapter discusses the latest published circuits and architecture techniques to minimize the SRAM VMIN for scaled bulk and FinFET technologies and improve battery life for ULP IoT applications

Ultra Low Power Digital Circuit Design for Wireless Sensor Network Applications

Ny forskning innenfor feltet trådløse sensornettverk åpner for nye og innovative produkter og løsninger. Biomedisinske anvendelser er blant områdene med størst potensial og det investeres i dag betydelige beløp for å bruke denne teknologien for å gjøre medisinsk diagnostikk mer effektiv samtidig som man åpner for fjerndiagnostikk basert på trådløse sensornoder integrert i et ”helsenett”. Målet er å forbedre tjenestekvalitet og redusere kostnader samtidig som brukerne skal oppleve forbedret livskvalitet som følge av økt trygghet og mulighet for å tilbringe mest mulig tid i eget hjem og unngå unødvendige sykehusbesøk og innleggelser. For å gjøre dette til en realitet er man avhengige av sensorelektronikk som bruker minst mulig energi slik at man oppnår tilstrekkelig batterilevetid selv med veldig små batterier. I sin avhandling ” Ultra Low power Digital Circuit Design for Wireless Sensor Network Applications” har PhD-kandidat Farshad Moradi fokusert på nye løsninger innenfor konstruksjon av energigjerrig digital kretselektronikk. Avhandlingen presenterer nye løsninger både innenfor aritmetiske og kombinatoriske kretser, samtidig som den studerer nye statiske minneelementer (SRAM) og alternative minnearkitekturer. Den ser også på utfordringene som oppstår når silisiumteknologien nedskaleres i takt med mikroprosessorutviklingen og foreslår løsninger som bidrar til å gjøre kretsløsninger mer robuste og skalerbare i forhold til denne utviklingen. De viktigste konklusjonene av arbeidet er at man ved å introdusere nye konstruksjonsteknikker både er i stand til å redusere energiforbruket samtidig som robusthet og teknologiskalerbarhet øker. Forskningen har vært utført i samarbeid med Purdue University og vært finansiert av Norges Forskningsråd gjennom FRINATprosjektet ”Micropower Sensor Interface in Nanometer CMOS Technology”

Digital Timing Control in SRAMs for Yield Enhancement and Graceful Aging Degradation

Embedded SRAMs can occupy the majority of the chip area in SOCs. The increase in process variation and aging degradation due to technology scaling can severely compromise the integrity of SRAM memory cells, hence resulting in cell failures. Enough cell failures in a memory can lead to it being rejected during initial testing, and hence decrease the manufacturing yield. Or, as a result of long-term applied stress, lead to in-field system failures. Certain types of cell failures can be mitigated through improved timing control. Post-fabrication programmable timing can allow for after-the-fact calibration of timing signals on a per die basis. This allows for a SRAM's timing signals to be generated based on the characteristics specific to the individual chip, thus allowing for an increase in yield and reduction in in-field system failures. In this thesis, a delay line based SRAM timing block with digitally programmable timing signals has been implemented in a 180 nm CMOS technology. Various timing-related cell failure mechanisms including: 1). Operational Read Failures, 2). Cell Stability Failures, and 3). Power Envelope Failures are investigated. Additionally, the major contributing factors for process variation and device aging degradation are discussed in the context of SRAMs. Simulations show that programmable timing can be used to reduce cell failure rates by over 50%

Design and Analysis of Low-power SRAMs

The explosive growth of battery operated devices has made low-power design a priority in recent years. Moreover, embedded SRAM units have become an important block in modern SoCs. The increasing number of transistor count in the SRAM units and the surging leakage current of the MOS transistors in the scaled technologies have made the SRAM unit a power hungry block from both dynamic and static perspectives. Owing to high bitline voltage swing during write operation, the write power consumption is dominated the dynamic power consumption. The static power consumption is mainly due to the leakage current associated with the SRAM cells distributed in the array. Moreover, as supply voltage decreases to tackle the power consumption, the data stability of the SRAM cells have become a major concern in recent years. To reduce the write power consumption, several schemes such as row based sense amplifying cell (SAC) and hierarchical bitline sense amplification (HBLSA) have been proposed. However, these schemes impose architectural limitations on the design in terms of the number of words on a row. Beside, the effectiveness of these methods is limited to the dynamic power consumption. Conventionally, reduction of the cell supply voltage and exploiting the body effect has been suggested to reduce the cell leakage current. However, variation of the supply voltage of the cell associates with a higher dynamic power consumption and reduced cell data stability. Conventionally qualified by Static Noise Margin (SNM), the ability of the cell to retain the data is reduced under a lower supply voltage conditions. In this thesis, we revisit the concept of data stability from the dynamic perspective. A new criteria for the data stability of the SRAM cell is defined. The new criteria suggests that the access time and non-access time (recovery time) of the cell can influence the data stability in a SRAM cell. The speed vs. stability trade-off opens new opportunities for aggressive power reduction for low-power applications. Experimental results of a test chip implemented in a 130 nm CMOS technology confirmed the concept and opened a ground for introduction of a new operational mode for the SRAM cells. We introduced a new architecture; Segmented Virtual Grounding (SVGND) to reduce the dynamic and static power reduction in SRAM units at the same time. Thanks to the new concept for the data stability in SRAM cells, we introduced the new operational mode of Accessed Retention Mode (AR-Mode) to the SRAM cell. In this mode, the accessed SRAM cell can retain the data, however, it does not discharge the bitline. The new architecture outperforms the recently reported low-power schemes in terms of dynamic power consumption, thanks to the exclusive discharge of the bitline and the cell virtual ground. In addition, the architecture reduces the leakage current significantly since it uses the back body biasing in both load and drive transistors. A 40Kb SRAM unit based on SVGND architecture is implemented in a 130 nm CMOS technology. Experimental results exhibit a remarkable static and dynamic power reduction compared to the conventional and previously reported low-power schemes as expect from the simulation results

Supply Voltage Dependence of Heavy Ion Induced SEEs on 65nm CMOS Bulk SRAMs

The power consumption of Static Random Access Memory (SRAM) has become an important issue for modern integrated circuit design, considering the fact that they occupy large area and consume significant portion of power consumption in modern nanometer chips. SRAM operating in low power supply voltages has become an effective approach in reducing power consumption. Therefore, it is essential to experimentally characterize the single event effects (SEE) of hardened and unhardened SRAM cells to determine their appropriate applications, especially when a low supply voltage is preferred. In this thesis, a SRAM test chip was designed and fabricated with four cell arrays sharing the same peripheral circuits, including two types of unhardened cells (standard 6T and sub-threshold 10T) and two types of hardened cells (Quatro and DICE). The systems for functional and radiation tests were built up with power supply voltages that ranged from near threshold 0.4 V to normal supply 1 V. The test chip was irradiated with alpha particles and heavy ions with various linear energy transfers (LETs) at different core supply voltages, ranging from 1 V to 0.4 V. Experimental results of the alpha test and heavy ion test were consistent with the results of the simulation. The cross sections of 6T and 10T cells present much more significant sensitivities than Quatro and DICE cells for all tested supply voltages and LET. The 10T cell demonstrates a more optimal radiation performance than the 6T cell when LET is small (0.44 MeV·cm2/mg), yet no significant advantage is evident when LET is larger than this. In regards to the Quatro and DICE cells, one does not consistently show superior performance over the other in terms of soft error rates (SERs). Multi-bit upsets (MBUs) occupy a larger portion of total SEUs in DICE cell when relatively larger LET and smaller supply voltage are applied. It explains the loss in radiation tolerance competition with Quatro cell when LET is bigger than 9.1 MeV·cm2/mg and supply voltage is smaller than 0.6 V. In addition, the analysis of test results also demonstrated that the error amount distributions follow a Poisson distribution very well for each type of cell array

Subthreshold SRAM Design for Energy Efficient Applications in Nanometric CMOS Technologies

Embedded SRAM circuits are vital components in a modern system on chip (SOC) that can occupy up to 90% of the total area. Therefore, SRAM circuits heavily affect SOC performance, reliability, and yield. In addition, most of the SRAM bitcells are in standby mode and significantly contribute to the total leakage current and leakage power consumption. The aggressive demand in portable devices and billions of connected sensor networks requires long battery life. Therefore, careful design of SRAM circuits with minimal power consumption is in high demand. Reducing the power consumption is mainly achieved by reducing the power supply voltage in the idle mode. However, simply reducing the supply voltage imposes practical limitations on SRAM circuits such as reduced static noise margin, poor write margin, reduced number of cells per bitline, and reduced bitline sensing margin that might cause read/write failures. In addition, the SRAM bitcell has contradictory requirements for read stability and writability. Improving the read stability can cause difficulties in a write operation or vice versa. In this thesis, various techniques for designing subthreshold energy-efficient SRAM circuits are proposed. The proposed techniques include improvement in read margin and write margin, speed improvement, energy consumption reduction, new bitcell architecture and utilizing programmable wordline boosting. A programmable wordline boosting technique is exploited on a conventional 6T SRAM bitcell to improve the operational speed. In addition, wordline boosting can reduce the supply voltage while maintaining the operational frequency. The reduction of the supply voltage allows the memory macro to operate with reduced power consumption. To verify the design, a 16-kb SRAM was fabricated using the TSMC 65 nm CMOS technology. Measurement results show that the maximum operational frequency increases up to 33.3% when wordline boosting is applied. Besides, the supply voltage can be reduced while maintaining the same frequency. This allows reducing the energy consumption to be reduced by 22.2%. The minimum energy consumption achieved is 0.536 fJ/b at 400 mV. Moreover, to improve the read margin, a 6T bitcell SRAM with a PMOS access transistor is proposed. Utilizing a PMOS access transistor results in lower zero level degradation, and hence higher read stability. In addition, the access transistor connected to the internal node holding V DD acts as a stabilizer and counterbalances the effect of zero level degradation. In order to improve the writability, wordline boosting is exploited. Wordline boosting also helps to compensate for the lower speed of the PMOS access transistor compared to a NMOS transistor. To verify our design, a 2kb SRAM is fabricated in the TSMC 65 nm CMOS technology. Measurement results show that the maximum operating frequency of the test chip is at 3.34 MHz at 290 mV. The minimum energy consumption is measured as 1.1 fJ/b at 400 mV

Design and Implementation of Low Power SRAM Using Highly Effective Lever Shifters

The explosive growth of battery-operated devices has made low-power design a priority in recent years. In high-performance Systems-on-Chip, leakage power consumption has become comparable to the dynamic component, and its relevance increases as technology scales. These trends are even more evident for SRAM memory devices since they are a dominant source of standby power consumption in low-power application processors. The on-die SRAM power consumption is particularly important for increasingly pervasive mobile and handheld applications where battery life is a key design and technology attribute. In the SRAM-memory design, SRAM cells also comprise the most significant portion of the total chip. Moreover, the increasing number of transistors in the SRAM memories and the MOSs\u27 increasing leakage current in the scaled technologies have turned the SRAM unit into a power-hungry block for both dynamic and static viewpoints. Although the scaling of the supply voltage enables low-power consumption, the SRAM cells\u27 data stability becomes a major concern. Thus, the reduction of SRAM leakage power has become a critical research concern. To address the leakage power consumption in high-performance cache memories, a stream of novel integrated circuit and architectural level techniques are proposed by researchers including leakage-current management techniques, cell array leakage reduction techniques, bitline leakage reduction techniques, and leakage current compensation techniques. The main goal of this work was to improve the cell array leakage reduction techniques in order to minimize the leakage power for SRAM memory design in low-power applications. This study performs the body biasing application to reduce leakage current as well. To adjust the NMOSs\u27 threshold voltage and consequently leakage current, a negative DC voltage could be applied to their body terminal as a second gate. As a result, in order to generate a negative DC voltage, this study proposes a negative voltage reference that includes a trimming circuit and a negative level shifter. These enhancements are employed to a 10kb SRAM memory operating at 0.3V in a 65nm CMOS process