Throughput Performance Evaluation of Multiservice Multirate OCDMA in Flexible Networks

\u3cp\u3eIn this paper, new analytical formalisms to evaluate the packet throughput of multiservice multirate slotted ALOHA optical code-division multiple-access (OCDMA) networks are proposed. The proposed formalisms can be successfully applied to 1-D and 2-D OCDMA networks with any number of user classes in the system. The bit error rate (BER) and packet correct probability expressions are derived, considering the multiple-access interference as binomially distributed. Packet throughput expressions, on the other hand, are derived considering Poisson, binomial, and Markov chain approaches for the composite packet arrivals distributions, with the latter defined as benchmark. A throughput performance evaluation is carried out for two distinct user code sequences separately, namely, 1-D and 2-D multiweight multilength optical orthogonal code (MWML-OOC). Numerical results show that the Poisson approach underestimates the throughput performance in unacceptable levels and incorrectly predicts the number of successfully received packets for most offered load values even in favorable conditions, such as for the 2-D MWML-OOC OCDMA network with a considerably large number of simultaneous users. On the other hand, the binomial approach proved to be more straightforward, computationally more efficient, and just as accurate as the Markov chain approach.\u3c/p\u3

Overlapped CDMA system in optical packet networks : resource allocation and performance evalutation

Dans cette thèse, la performance du système CDMA à chevauchement optique (OVCDMA) au niveau de la couche de contrôle d'accès au support (MAC) et l'allocation des ressources au niveau de la couche physique (PRY) sont étudiées. Notre but est d'apporter des améliorations pour des applications à débits multiples en répondant aux exigences de délai minimum tout en garantissant la qualité de service (QoS). Nous proposons de combiner les couches PRY et MAC par une nouvelle approche d'optimisation de performance qui consolide l'efficacité potentielle des réseaux optiques. Pour atteindre notre objectif, nous réalisons plusieurs étapes d'analyse. Tout d 'abord, nous suggérons le protocole S-ALOHA/OV-CDMA optique pour sa simplicité de contrôler les transmissions optiques au niveau de la couche liaison. Le débit du réseau, la latence de transmission et la stabilité du protocole sont ensuite évalués. L'évaluation prend en considération les caractéristiques physiques du système OY-CDMA, représentées par la probabilité de paquets bien reçus. Le système classique à traitement variable du gain (YPG) du CDMA, ciblé pour les applications à débits multiples, et le protocole MAC ±round-robin¿ récepteur/émetteur (R31), initialement proposé pour les réseaux par paquets en CDMA optique sont également pris en compte. L'objectif est d ' évaluer comparativement la performance du S-ALOHA/OY-CDMA en termes de l'immunité contre l'interférence d'accès lTIultiple (MAI) et les variations des charges du trafic. Les résultats montrent que les performances peuvent varier en ce qui concerne le choix du taux de transmission et la puissance de transmission optique au niveau de la couche PRY. Ainsi, nous proposons un schéma de répartition optimale des ressources pour allouer des taux de transmission à chevauchement optique et de puissance optique de transmission dans le système OY-CDMA comme des ressources devant être optimalement et équitablement réparties entre les utilisateurs qui sont regroupés dans des classes de différentes qualités de service. La condition d'optimalité est basée sur la maximisation de la capacité par utilisateur de la couche PHY. De ce fait, un choix optimal des ressources physiques est maintenant possible, mais il n'est pas équitable entre les classes. Par conséquent, pour améliorer la performance de la couche liaison tout en éliminant le problème d'absence d'équité, nous proposons comme une approche unifiée un schéma équitable et optimal pour l'allocation des ressources fondé sur la qualité de service pour des multiplexages temporels des réseaux par paquets en CDMA à chevauchement optique. Enfin, nous combinons cette dernière approche avec le protocole MAC dans un problème d'optimisation d'allocation équitable des ressources à contrainte de délai afin de mieux améliorer le débit du réseau et le délai au niveau de la couche liaison avec allocation équitable et optimale des ressources au niveau de la couche PHY

Enhanced Optical Wireless Channel For Indoor And Intravehicle Communications: Power Distribution And Signal To Noise Ratio Analysis

Visible light communication—(VLC) provides wide bandwidth and high security capabilities for free space optical communication. This thesis presents the key concepts, underlying principles and practical applications of visible light communications. In particular, this thesis focuses on the received power distribution pattern and signal to noise ratio for line-of-sight indoor and vehicular applications. Several methods are used to modify the SNR and power distribution levels. It is shown that in the absence of obstruction, the optical footprint is nearly circular and offers a platform for large- scale deployment in commercial environments, which is similar to micro and Pico cells. By studying various kinds of commonly used VLC channel analysis: diffuse and line of sight channels, a simple improved indoor and intra-vehicular VLC transmission model for power distribution and SNR is presented. Employing optical wireless communications within the vehicle not only enhances user mobility, but also alleviates radio frequency interference, and lowers system cost through the utilization of license free spectrum. Moreover, a solution to increase the received power by changing the semi angle at half power is presented. The simulation results show the improved received power distribution and SNR. A VLC system, based on color-shift-keying (CSK) modulation and code-division multiple-access (CDMA) is presented. CSK–CDMA VLC system is used to enhance the VLC system capacity and mitigate single color light interference, which allows multiple users to access the network

Design guidelines for spatial modulation

A new class of low-complexity, yet energyefficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO) has emerged. These systems are capable of exploiting the spatial dimensions (i.e. the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication whilst relying on a single-Radio Frequency (RF) chain. Moreover, SM may also be viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/ cooperative protocol design issues, and on their meritorious variants

Survey of Inter-satellite Communication for Small Satellite Systems: Physical Layer to Network Layer View

Small satellite systems enable whole new class of missions for navigation, communications, remote sensing and scientific research for both civilian and military purposes. As individual spacecraft are limited by the size, mass and power constraints, mass-produced small satellites in large constellations or clusters could be useful in many science missions such as gravity mapping, tracking of forest fires, finding water resources, etc. Constellation of satellites provide improved spatial and temporal resolution of the target. Small satellite constellations contribute innovative applications by replacing a single asset with several very capable spacecraft which opens the door to new applications. With increasing levels of autonomy, there will be a need for remote communication networks to enable communication between spacecraft. These space based networks will need to configure and maintain dynamic routes, manage intermediate nodes, and reconfigure themselves to achieve mission objectives. Hence, inter-satellite communication is a key aspect when satellites fly in formation. In this paper, we present the various researches being conducted in the small satellite community for implementing inter-satellite communications based on the Open System Interconnection (OSI) model. This paper also reviews the various design parameters applicable to the first three layers of the OSI model, i.e., physical, data link and network layer. Based on the survey, we also present a comprehensive list of design parameters useful for achieving inter-satellite communications for multiple small satellite missions. Specific topics include proposed solutions for some of the challenges faced by small satellite systems, enabling operations using a network of small satellites, and some examples of small satellite missions involving formation flying aspects.Comment: 51 pages, 21 Figures, 11 Tables, accepted in IEEE Communications Surveys and Tutorial