194 research outputs found
Evaluación del rendimiento de la red 5G con diferentes implementaciones de sistemas de antenas distribuidas en mmW para zonas de alto tráfico en interiores
[ES] En la banda de mmW donde la cobertura es limitada, la implementación de cada transmisor exactamente donde se necesita se vuelve más crítica que nunca. Además, el número de dispositivos que se implementarán es mucho mayor que en frecuencias más bajas. En este marco, este trabajo final de grado tiene como objetivo evaluar cuáles son las mejores distribuciones de antenas de acuerdo con los requisitos de la red en banda mmW y considerando la simplicidad en la implementación práctica.[EN] In the mmW band where coverage is limited, deploying each transmitter exactly where it is needed becomes more critical than ever. In addition, the number of devices to be deployed is much higher than at lower frequencies. In this framework, this project aims to evaluate which are the best antenna distributions according to the requirements of the mmW network and considering the simplicity in practical deployment.Antón Ruiz, A. (2020). Evaluación del rendimiento de la red 5G con diferentes implementaciones de sistemas de antenas distribuidas en mmW para zonas de alto tráfico en interiores. http://hdl.handle.net/10251/152387TFG
Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey
In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner
Improvement of 5G performance through network densification in millimetre wave band
Recently, there has been a substantial growth in mobile data traffic due to the widespread of data hungry devices such as mobiles and laptops. The anticipated high traffic demands and low latency requirements stemmed from the Internet of Things (IoT) and Machine Type Communications (MTC) can only be met with radical changes to the network paradigm such as harnessing the millimetre wave (mmWave) band in Ultra-Dense Network (UDN). This thesis presents many challenges, problems and questions that arise in research and design stage of 5G network. The main challenges of 5G in mmWave can be characterised with the following attributes: i- huge traffic demands, with very high data rate requirements, ii- high interference in UDN, iii increased handover in UDN, higher dependency on Line of Sight (LOS) coverage and high shadow fading, and iv-massive MTC traffic due to billions of connected devices. In this work, software simulation tools have been used to evaluate the proposed solutions. Therefore, we have introduced 5G network based on network densification. Network densification includes densification over frequency through mmWave, and densification over space through higher number of antennas, Higher Order Sectorisation (HOS), and denser deployment of small-cells. Our results show that the densification theme has significantly improved network capacity and user Quality of Experience (QoE). UDN network can efficiently raise the user experience to the level that 5G vision promised. However, one of the drawback of using UDN and HOS is the significant increase in Inter-Cell Interference (ICI). Therefore, ICI has been addressed in this work to increase the gain of densification. ICI can degrade the performance of wireless network, particularly in UDN due to the increased interference from surrounding cells. We have used Fractional Frequency Reuse (FFR) as ICI Coordination (ICIC) for UDN network and HOS environment. The work shows that FFR has improved the network performance in terms of cell-edge data throughput and average cell throughput, and maintain the peak data throughput at a certain threshold. Additionally, HOS has shown even greater gain over default sectored sites when the interference is carefully coordinated. To generalise the principle of densification, we have introduced Distributed Base Station (DBS) as the envisioned network architecture for 5G in mmWave. Remotely distributed antennas in DBS architecture have been harnessed in order to compensate for the high path loss that characterise mmWave propagation. The proposed architecture has significantly improved the user data throughput, decreased the unnecessary handovers as a result of dense network, increased the LOS coverage probability, and reduced the impact of shadow fading. Additionally, this research discusses the regulatory requirements at mmWave band for the Maximum Permissible Exposure (MPE). Finally, scheduling massive MTC traffic in 5G has been considered. MTC is expected to contribute to the majority of IoT traffic. In this context, an algorithm has been developed to schedule this type of traffic. The results demonstrate the gain of using distributed antennas on MTC traffic in terms of spectral efficiency, data throughput, and fairness. The results show considerable improvement in the performance metrics. The combination of these contributions has provided remarkable increase in data throughput to achieve the 5G vision of “massive” capacity and to support human and machine traffic
Ondas milimétricas e MIMO massivo para otimização da capacidade e cobertura de redes heterogeneas de 5G
Today's Long Term Evolution Advanced (LTE-A) networks cannot support
the exponential growth in mobile traffic forecast for the next decade. By
2020, according to Ericsson, 6 billion mobile subscribers worldwide are projected
to generate 46 exabytes of mobile data traffic monthly from 24 billion
connected devices, smartphones and short-range Internet of Things (IoT)
devices being the key prosumers. In response, 5G networks are foreseen
to markedly outperform legacy 4G systems. Triggered by the International
Telecommunication Union (ITU) under the IMT-2020 network initiative, 5G
will support three broad categories of use cases: enhanced mobile broadband
(eMBB) for multi-Gbps data rate applications; ultra-reliable and low latency
communications (URLLC) for critical scenarios; and massive machine
type communications (mMTC) for massive connectivity. Among the several
technology enablers being explored for 5G, millimeter-wave (mmWave)
communication, massive MIMO antenna arrays and ultra-dense small cell
networks (UDNs) feature as the dominant technologies. These technologies
in synergy are anticipated to provide the 1000_ capacity increase for 5G
networks (relative to 4G) through the combined impact of large additional
bandwidth, spectral efficiency (SE) enhancement and high frequency reuse,
respectively. However, although these technologies can pave the way towards
gigabit wireless, there are still several challenges to solve in terms of
how we can fully harness the available bandwidth efficiently through appropriate
beamforming and channel modeling approaches. In this thesis, we
investigate the system performance enhancements realizable with mmWave
massive MIMO in 5G UDN and cellular infrastructure-to-everything (C-I2X)
application scenarios involving pedestrian and vehicular users. As a critical
component of the system-level simulation approach adopted in this thesis,
we implemented 3D channel models for the accurate characterization of the
wireless channels in these scenarios and for realistic performance evaluation.
To address the hardware cost, complexity and power consumption of the
massive MIMO architectures, we propose a novel generalized framework for
hybrid beamforming (HBF) array structures. The generalized model reveals
the opportunities that can be harnessed with the overlapped subarray structures
for a balanced trade-o_ between SE and energy efficiently (EE) of 5G
networks. The key results in this investigation show that mmWave massive
MIMO can deliver multi-Gbps rates for 5G whilst maintaining energy-efficient operation of the network.As redes LTE-A atuais não são capazes de suportar o crescimento exponencial
de tráfego que está previsto para a próxima década. De acordo
com a previsão da Ericsson, espera-se que em 2020, a nível global, 6 mil
milhões de subscritores venham a gerar mensalmente 46 exa bytes de tráfego
de dados a partir de 24 mil milhões de dispositivos ligados à rede móvel,
sendo os telefones inteligentes e dispositivos IoT de curto alcance os principais
responsáveis por tal nível de tráfego. Em resposta a esta exigência,
espera-se que as redes de 5a geração (5G) tenham um desempenho substancialmente
superior às redes de 4a geração (4G) atuais. Desencadeado pelo
UIT (União Internacional das Telecomunicações) no âmbito da iniciativa
IMT-2020, o 5G irá suportar três grandes tipos de utilizações: banda larga
móvel capaz de suportar aplicações com débitos na ordem de vários Gbps;
comunicações de baixa latência e alta fiabilidade indispensáveis em cenários
de emergência; comunicações massivas máquina-a-máquina para conectividade
generalizada. Entre as várias tecnologias capacitadoras que estão a ser
exploradas pelo 5G, as comunicações através de ondas milimétricas, os agregados
MIMO massivo e as redes celulares ultradensas (RUD) apresentam-se
como sendo as tecnologias fundamentais. Antecipa-se que o conjunto
destas tecnologias venha a fornecer às redes 5G um aumento de capacidade
de 1000x através da utilização de maiores larguras de banda, melhoria da
eficiência espectral, e elevada reutilização de frequências respetivamente.
Embora estas tecnologias possam abrir caminho para as redes sem fios
com débitos na ordem dos gigabits, existem ainda vários desafios que têm
que ser resolvidos para que seja possível aproveitar totalmente a largura de
banda disponível de maneira eficiente utilizando abordagens de formatação
de feixe e de modelação de canal adequadas. Nesta tese investigamos a
melhoria de desempenho do sistema conseguida através da utilização de
ondas milimétricas e agregados MIMO massivo em cenários de redes celulares
ultradensas de 5a geração e em cenários 'infraestrutura celular-para-qualquer
coisa' (do inglês: cellular infrastructure-to-everything) envolvendo
utilizadores pedestres e veiculares. Como um componente fundamental das
simulações de sistema utilizadas nesta tese é o canal de propagação, implementamos modelos de canal tridimensional (3D) para caracterizar de
forma precisa o canal de propagação nestes cenários e assim conseguir uma
avaliação de desempenho mais condizente com a realidade. Para resolver os
problemas associados ao custo do equipamento, complexidade e consumo
de energia das arquiteturas MIMO massivo, propomos um modelo inovador
de agregados com formatação de feixe híbrida. Este modelo genérico revela
as oportunidades que podem ser aproveitadas através da sobreposição
de sub-agregados no sentido de obter um compromisso equilibrado entre
eficiência espectral (ES) e eficiência energética (EE) nas redes 5G. Os principais
resultados desta investigação mostram que a utilização conjunta de
ondas milimétricas e de agregados MIMO massivo possibilita a obtenção, em
simultâneo, de taxas de transmissão na ordem de vários Gbps e a operação
de rede de forma energeticamente eficiente.Programa Doutoral em Telecomunicaçõe
6G Wireless Systems: Vision, Requirements, Challenges, Insights, and Opportunities
Mobile communications have been undergoing a generational change every ten
years or so. However, the time difference between the so-called "G's" is also
decreasing. While fifth-generation (5G) systems are becoming a commercial
reality, there is already significant interest in systems beyond 5G, which we
refer to as the sixth-generation (6G) of wireless systems. In contrast to the
already published papers on the topic, we take a top-down approach to 6G. We
present a holistic discussion of 6G systems beginning with lifestyle and
societal changes driving the need for next generation networks. This is
followed by a discussion into the technical requirements needed to enable 6G
applications, based on which we dissect key challenges, as well as
possibilities for practically realizable system solutions across all layers of
the Open Systems Interconnection stack. Since many of the 6G applications will
need access to an order-of-magnitude more spectrum, utilization of frequencies
between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G
eco-system will feature a diverse range of frequency bands, ranging from below
6 GHz up to 1 THz. We comprehensively characterize the limitations that must be
overcome to realize working systems in these bands; and provide a unique
perspective on the physical, as well as higher layer challenges relating to the
design of next generation core networks, new modulation and coding methods,
novel multiple access techniques, antenna arrays, wave propagation,
radio-frequency transceiver design, as well as real-time signal processing. We
rigorously discuss the fundamental changes required in the core networks of the
future that serves as a major source of latency for time-sensitive
applications. While evaluating the strengths and weaknesses of key 6G
technologies, we differentiate what may be achievable over the next decade,
relative to what is possible.Comment: Accepted for Publication into the Proceedings of the IEEE; 32 pages,
10 figures, 5 table
Study, Measurements and Characterisation of a 5G system using a Mobile Network Operator Testbed
The goals for 5G are aggressive. It promises to deliver enhanced end-user experience
by offering new applications and services through gigabit speeds, and significantly
improved performance and reliability. The enhanced mobile broadband (eMBB) 5G use
case, for instance, targets peak data rates as high as 20 Gbps in the downlink (DL) and
10 Gbps in the uplink (UL).
While there are different ways to improve data rates, spectrum is at the core of enabling
higher mobile broadband data rates. 5G New Radio (NR) specifies new frequency
bands below 6 GHz and also extends into mmWave frequencies where more
contiguous bandwidth is available for sending lots of data. However, at mmWave
frequencies, signals are more susceptible to impairments. Hence, extra consideration is
needed to determine test approaches that provide the precision required to accurately
evaluate 5G components and devices.
Therefore, the aim of the thesis is to provide a deep dive into 5G technology, explore its
testing and validation, and thereafter present the OTE (Hellenic Telecommunications
Organisation) 5G testbed, including measurement results obtained and its characterisation based on key performance indicators (KPIs)
- …