Intelligent control of battery energy storage for microgrid energy management using ANN

In this paper, an intelligent control strategy for a microgrid system consisting of Photovoltaic panels, grid-connected, and li-ion battery energy storage systems proposed. The energy management based on the managing of battery charging and discharging by integration of a smart controller for DC/DC bidirectional converter. The main novelty of this solution are the integration of artificial neural network (ANN) for the estimation of the battery state of charge (SOC) and for the control of bidirectional converter. The simulation results obtained in the MATLAB/Simulink environment explain the performance and the robust of the proposed control technique

Electric Vehicles Charging Stations’ Architectures, Criteria, Power Converters, and Control Strategies in Microgrids

Electric Vehicles (EV) usage is increasing over the last few years due to a rise in fossil fuel prices and the rate of increasing carbon dioxide (CO2) emissions. The EV charging stations are powered by the existing utility power grid systems, increasing the stress on the utility grid and the load demand at the distribution side. The DC grid-based EV charging is more efficient than the AC distribution because of its higher reliability, power conversion efficiency, simple interfacing with renewable energy sources (RESs), and integration of energy storage units (ESU). The RES-generated power storage in local ESU is an alternative solution for managing the utility grid demand. In addition, to maintain the EV charging demand at the microgrid levels, energy management and control strategies must carefully power the EV battery charging unit. Also, charging stations require dedicated converter topologies, control strategies and need to follow the levels and standards. Based on the EV, ESU, and RES accessibility, the different types of microgrids architecture and control strategies are used to ensure the optimum operation at the EV charging point. Based on the above said merits, this review paper presents the different RES-connected architecture and control strategies used in EV charging stations. This study highlights the importance of different charging station architectures with the current power converter topologies proposed in the literature. In addition, the comparison of the microgrid-based charging station architecture with its energy management, control strategies, and charging converter controls are also presented. The different levels and types of the charging station used for EV charging, in addition to controls and connectors used in the charging station, are discussed. The experiment-based energy management strategy is developed for controlling the power flow among the available sources and charging terminals for the effective utilization of generated renewable power. The main motive of the EMS and its control is to maximize usage of RES consumption. This review also provides the challenges and opportunities for EV charging, considering selecting charging stations in the conclusion.publishedVersio

Review on Control of DC Microgrids and Multiple Microgrid Clusters

This paper performs an extensive review on control schemes and architectures applied to dc microgrids (MGs). It covers multilayer hierarchical control schemes, coordinated control strategies, plug-and-play operations, stability and active damping aspects, as well as nonlinear control algorithms. Islanding detection, protection, and MG clusters control are also briefly summarized. All the mentioned issues are discussed with the goal of providing control design guidelines for dc MGs. The future research challenges, from the authors' point of view, are also provided in the final concluding part

Management of Distributed Energy Storage Systems for Provisioning of Power Network Services

Because of environmentally friendly reasons and advanced technological development, a significant number of renewable energy sources (RESs) have been integrated into existing power networks. The increase in penetration and the uneven allocation of the RESs and load demands can lead to power quality issues and system instability in the power networks. Moreover, high penetration of the RESs can also cause low inertia due to a lack of rotational machines, leading to frequency instability. Consequently, the resilience, stability, and power quality of the power networks become exacerbated. This thesis proposes and develops new strategies for energy storage (ES) systems distributed in power networks for compensating for unbalanced active powers and supply-demand mismatches and improving power quality while taking the constraints of the ES into consideration. The thesis is mainly divided into two parts. In the first part, unbalanced active powers and supply-demand mismatch, caused by uneven allocation and distribution of rooftop PV units and load demands, are compensated by employing the distributed ES systems using novel frameworks based on distributed control systems and deep reinforcement learning approaches. There have been limited studies using distributed battery ES systems to mitigate the unbalanced active powers in three-phase four-wire and grounded power networks. Distributed control strategies are proposed to compensate for the unbalanced conditions. To group households in the same phase into the same cluster, algorithms based on feature states and labelled phase data are applied. Within each cluster, distributed dynamic active power balancing strategies are developed to control phase active powers to be close to the reference average phase power. Thus, phase active powers become balanced. To alleviate the supply-demand mismatch caused by high PV generation, a distributed active power control system is developed. The strategy consists of supply-demand mismatch and battery SoC balancing. Control parameters are designed by considering Hurwitz matrices and Lyapunov theory. The distributed ES systems can minimise the total mismatch of power generation and consumption so that reverse power flowing back to the main is decreased. Thus, voltage rise and voltage fluctuation are reduced. Furthermore, as a model-free approach, new frameworks based on Markov decision processes and Markov games are developed to compensate for unbalanced active powers. The frameworks require only proper design of states, action and reward functions, training, and testing with real data of PV generations and load demands. Dynamic models and control parameter designs are no longer required. The developed frameworks are then solved using the DDPG and MADDPG algorithms. In the second part, the distributed ES systems are employed to improve frequency, inertia, voltage, and active power allocation in both islanded AC and DC microgrids by novel decentralized control strategies. In an islanded DC datacentre microgrid, a novel decentralized control of heterogeneous ES systems is proposed. High- and low frequency components of datacentre loads are shared by ultracapacitors and batteries using virtual capacitive and virtual resistance droop controllers, respectively. A decentralized SoC balancing control is proposed to balance battery SoCs to a common value. The stability model ensures the ES devices operate within predefined limits. In an isolated AC microgrid, decentralized frequency control of distributed battery ES systems is proposed. The strategy includes adaptive frequency droop control based on current battery SoCs, virtual inertia control to improve frequency nadir and frequency restoration control to restore system frequency to its nominal value without being dependent on communication infrastructure. A small-signal model of the proposed strategy is developed for calculating control parameters. The proposed strategies in this thesis are verified using MATLAB/Simulink with Reinforcement Learning and Deep Learning Toolboxes and RTDS Technologies' real-time digital simulator with accurate power networks, switching levels of power electronic converters, and a nonlinear battery model

Fuzzy logic-based controller of the bidirectional direct current to direct current converter in microgrid

Microgrids are small-scale power networks that include renewable energy sources, load, energy storage systems, and energy management systems (EMS). Lithium-ion batteries are the most used battery for energy storage in microgrids due to their advantages over other types of batteries. However, to protect the battery from the explosion and to manage to charge and discharge based on state-of-charge (SoC) value, this type of battery requires the use of an energy management system. The main objective of this paper is to propose an intelligent control strategy for energy management in the microgrid to control the charge and discharge of Li-ion batteries to stabilize the system and reduce the cost of electricity due to the high cost of grid electricity. The proposed technique is based on a fuzzy logic controller (FLC) for voltage control. The FLC is based on the measured voltage of the direct current (DC) bus and the fixed reference voltage to generate buck/boost converter signal control. The proposed technique has been simulated and tested using MATLAB/Simulink software which illustrates the tracking of desired power and DC bus voltage regulation. The simulation results confirm that the proposed systems can diminish the deviations of the system's voltage

A Fuzzy Logic Based Power Management System for a Hybrid Microgrid

A fuzzy logic-based power management system for a hybrid microgrid is designed in this paper. This designed system is capable to manage the generations considering the load conditions. Consequently, a balance is maintained between generations and load. Furthermore, the system is capable to monitor and manage the storage system charging and discharging as well as to support the external load by sharing power as per considering the situation. Moreover, to make this system more efficient it is such designed that, the storage system will not take any energy from the conventional generation units of the microgrid. Additionally, it is also ensured that, no power will be delivered to the external load utilizing storage or generator. The “Fuzzy Logic Designer” toolbox of MATLAB is used to observe the relationship between the input and output variables, after establishing the fuzzy sets and rules. Furthermore, transferring the fuzzy data sets and rules to MATLAB Simulink and performing different case studies, the effectiveness of the designed system is verified numerically

On the Control of Microgrids Against Cyber-Attacks: A Review of Methods and Applications

Nowadays, the use of renewable generations, energy storage systems (ESSs) and microgrids (MGs) has been developed due to better controllability of distributed energy resources (DERs) as well as their cost-effective and emission-aware operation. The development of MGs as well as the use of hierarchical control has led to data transmission in the communication platform. As a result, the expansion of communication infrastructure has made MGs as cyber-physical systems (CPSs) vulnerable to cyber-attacks (CAs). Accordingly, prevention, detection and isolation of CAs during proper control of MGs is essential. In this paper, a comprehensive review on the control strategies of microgrids against CAs and its defense mechanisms has been done. The general structure of the paper is as follows: firstly, MGs operational conditions, i.e., the secure or insecure mode of the physical and cyber layers are investigated and the appropriate control to return to a safer mode are presented. Then, the common MGs communication system is described which is generally used for multi-agent systems (MASs). Also, classification of CAs in MGs has been reviewed. Afterwards, a comprehensive survey of available researches in the field of prevention, detection and isolation of CA and MG control against CA are summarized. Finally, future trends in this context are clarified

Microgrids

Integration of renewable energy sources in the electrical power system is key for enabling the decarbonization of that system. The connection of renewable generation to the electrical system is being performed in a centralized form (large renewable power plants like wind or solar power plants connected at the transmission system) and in a decentralized manner (through the connection of dispersed generation connected at the distribution system). The connection of renewable generation at distribution levels, together with other generating sources as well as energy storage systems (the so-called DER, Distributed Energy Resources) close to consumption sites, is promoting the development of microgrids: DER installations that have the capability to operate grid connected and grid isolated. The uncertainty and variability of the renewable energy sources that integrate microgrids, as well as the need for coordination with other energy sources, pose challenges in the operation, protection, control, and planning of microgrids. The five selected papers published in this Special Issue propose solutions to address these challenges.Peer ReviewedObjectius de Desenvolupament Sostenible::7 - Energia Assequible i No ContaminantObjectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.1 - Per a 2030, garantir l’accés universal a serveis d’energia assequibles, confiables i modernsObjectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant::7.2 - Per a 2030, augmentar substancialment el percentatge d’energia renovable en el con­junt de fonts d’energiaPostprint (published version

A Review of Energy Management of Renewable Multisources in Industrial Microgrids

This review aims to consolidate recent advancements in power control within microgrids and multi-microgrids. It specifically focuses on analyzing the comparative benefits of various architectures concerning energy sharing and demand cost management. The paper provides a comprehensive technical analysis of different architectures found in existing literature, which are designed for energy management and demand cost optimization. In summary, this review paper provides a thorough examination of power control in microgrids and multi-microgrids and compares different architectural approaches for energy management and demand cost optimization