A Fixed-Point Algorithm for Closed Queueing Networks

In this paper we propose a new efficient iterative scheme for solving closed queueing networks with phase-type service time distributions. The method is especially efficient and accurate in case of large numbers of nodes and large customer populations. We present the method, put it in perspective, and validate it through a large number of test scenarios. In most cases, the method provides accuracies within 5% relative error (in comparison to discrete-event simulation)

On closed queueing networks with mixed preemptive resume priority servers.

This paper discusses a typical closed queueing network model in which multiple preemptive resume servers are present with different priority structures at each priority node. An algorithm is developed that is applicable for the three-node two-class model and results are compared to point estimates obtained from simulation. The algorithm is partly based on the Delay/MVA algorithm developed by Bondi and Chuang, because of the accuracy with which instant arrival queue lengths at fcfs servers are calculated. Results are also compared with results obtained from the Shadow Approximation.Networks;

Integrated performance evaluation of extended queueing network models with line

Despite the large literature on queueing theory and its applications, tool support to analyze these models ismostly focused on discrete-event simulation and mean-value analysis (MVA). This circumstance diminishesthe applicability of other types of advanced queueing analysis methods to practical engineering problems,for example analytical methods to extract probability measures useful in learning and inference. In this toolpaper, we present LINE 2.0, an integrated software package to specify and analyze extended queueingnetwork models. This new version of the tool is underpinned by an object-oriented language to declarea fairly broad class of extended queueing networks. These abstractions have been used to integrate in acoherent setting over 40 different simulation-based and analytical solution methods, facilitating their use inapplications

Decomposing the queue length distribution of processor-sharing models into queue lengths of permanent customer queues

We obtain a decomposition result for the steady state queue length distribution in egalitarian processor-sharing (PS) models. In particular, for an egalitarian PS queue with $K$ customer classes, we show that the marginal queue length distribution for class $k$ factorizes over the number of other customer types. The factorizing coefficients equal the queue length probabilities of a PS queue for type $k$ in isolation, in which the customers of the other types reside \textit{ permanently} in the system. Similarly, the (conditional) mean sojourn time for class $k$ can be obtained by conditioning on the number of permanent customers of the other types. The decomposition result implies linear relations between the marginal queue length probabilities, which also hold for other PS models such as the egalitarian processor-sharing models with state-dependent system capacity that only depends on the total number of customers in the system. Based on the exact decomposition result for egalitarian PS queues, we propose a similar decomposition for discriminatory processor-sharing (DPS) models, and numerically show that the approximation is accurate for moderate differences in service weights. \u

EUROPEAN CONFERENCE ON QUEUEING THEORY 2016

International audienceThis booklet contains the proceedings of the second European Conference in Queueing Theory (ECQT) that was held from the 18th to the 20th of July 2016 at the engineering school ENSEEIHT, Toulouse, France. ECQT is a biannual event where scientists and technicians in queueing theory and related areas get together to promote research, encourage interaction and exchange ideas. The spirit of the conference is to be a queueing event organized from within Europe, but open to participants from all over the world. The technical program of the 2016 edition consisted of 112 presentations organized in 29 sessions covering all trends in queueing theory, including the development of the theory, methodology advances, computational aspects and applications. Another exciting feature of ECQT2016 was the institution of the Takács Award for outstanding PhD thesis on "Queueing Theory and its Applications"

Performance Modelling and Optimisation of Multi-hop Networks

A major challenge in the design of large-scale networks is to predict and optimise the total time and energy consumption required to deliver a packet from a source node to a destination node. Examples of such complex networks include wireless ad hoc and sensor networks which need to deal with the effects of node mobility, routing inaccuracies, higher packet loss rates, limited or time-varying effective bandwidth, energy constraints, and the computational limitations of the nodes. They also include more reliable communication environments, such as wired networks, that are susceptible to random failures, security threats and malicious behaviours which compromise their quality of service (QoS) guarantees. In such networks, packets traverse a number of hops that cannot be determined in advance and encounter non-homogeneous network conditions that have been largely ignored in the literature. This thesis examines analytical properties of packet travel in large networks and investigates the implications of some packet coding techniques on both QoS and resource utilisation. Specifically, we use a mixed jump and diffusion model to represent packet traversal through large networks. The model accounts for network non-homogeneity regarding routing and the loss rate that a packet experiences as it passes successive segments of a source to destination route. A mixed analytical-numerical method is developed to compute the average packet travel time and the energy it consumes. The model is able to capture the effects of increased loss rate in areas remote from the source and destination, variable rate of advancement towards destination over the route, as well as of defending against malicious packets within a certain distance from the destination. We then consider sending multiple coded packets that follow independent paths to the destination node so as to mitigate the effects of losses and routing inaccuracies. We study a homogeneous medium and obtain the time-dependent properties of the packet’s travel process, allowing us to compare the merits and limitations of coding, both in terms of delivery times and energy efficiency. Finally, we propose models that can assist in the analysis and optimisation of the performance of inter-flow network coding (NC). We analyse two queueing models for a router that carries out NC, in addition to its standard packet routing function. The approach is extended to the study of multiple hops, which leads to an optimisation problem that characterises the optimal time that packets should be held back in a router, waiting for coding opportunities to arise, so that the total packet end-to-end delay is minimised

Efficiency evaluation for pooling resources in health care

Hospitals traditionally segregate resources into centralized functional departments such as diagnostic departments, ambulatory care centers, and nursing wards. In recent years this organizational model has been challenged by the idea that higher quality of care and efficiency in service delivery can be achieved when services are organized around patient groups. Examples include specialized clinics for breast cancer patients and clinical pathways for diabetes patients. Hospitals are struggling with the question of whether to become more centralized to achieve economies of scale or more decentralized to achieve economies of focus. In this paper we examine service and patient group characteristics to study the conditions where a centralized model is more efficient, and conversely, where a decentralized model is more efficient. This relationship is examined analytically with a queuing model to determine themost influential factors and then with simulation to fine-tune the results. The tradeoffs between economies of scale and economies of focus measured by these models are used to derive general management guidelines

Open queueing networks : optimization and performance evaluation models for discrete manufacturing systems

Includes bibliographical references (p. 41-45).Research supported by Fundac̦ão de Amparo a Pesquisa do Estado de São Paulo, Brazil.by Gabriel R. Bitran, Reinaldo Morabito

Dynamical Modeling of Cloud Applications for Runtime Performance Management

Cloud computing has quickly grown to become an essential component in many modern-day software applications. It allows consumers, such as a provider of some web service, to quickly and on demand obtain the necessary computational resources to run their applications. It is desirable for these service providers to keep the running cost of their cloud application low while adhering to various performance constraints. This is made difficult due to the dynamics imposed by, e.g., resource contentions or changing arrival rate of users, and the fact that there exist multiple ways of influencing the performance of a running cloud application. To facilitate decision making in this environment, performance models can be introduced that relate the workload and different actions to important performance metrics.In this thesis, such performance models of cloud applications are studied. In particular, we focus on modeling using queueing theory and on the fluid model for approximating the often intractable dynamics of the queue lengths. First, existing results on how the fluid model can be obtained from the mean-field approximation of a closed queueing network are simplified and extended to allow for mixed networks. The queues are allowed to follow the processor sharing or delay disciplines, and can have multiple classes with phase-type service times. An improvement to this fluid model is then presented to increase accuracy when the \emph{system size}, i.e., number of servers, initial population, and arrival rate, is small. Furthermore, a closed-form approximation of the response time CDF is presented. The methods are tested in a series of simulation experiments and shown to be accurate. This mean-field fluid model is then used to derive a general fluid model for microservices with interservice delays. The model is shown to be completely extractable at runtime in a distributed fashion. It is further evaluated on a simple microservice application and found to accurately predict important performance metrics in most cases. Furthermore, a method is devised to reduce the cost of a running application by tuning load balancing parameters between replicas. The method is built on gradient stepping by applying automatic differentiation to the fluid model. This allows for arbitrarily defined cost functions and constraints, most notably including different response time percentiles. The method is tested on a simple application distributed over multiple computing clusters and is shown to reduce costs while adhering to percentile constraints. Finally, modeling of request cloning is studied using the novel concept of synchronized service. This allows certain forms of cloning over servers, each modeled with a single queue, to be equivalently expressed as one single queue. The concept is very general regarding the involved queueing discipline and distributions, but instead introduces new, less realistic assumptions. How the equivalent queue model is affected by relaxing these assumptions is studied considering the processor sharing discipline, and an extension to enable modeling of speculative execution is made. In a simulation campaign, it is shown that these relaxations only has a minor effect in certain cases