The role of morphology of the thumb in anthropomorphic grasping : a review

The unique musculoskeletal structure of the human hand brings in wider dexterous capabilities to grasp and manipulate a repertoire of objects than the non-human primates. It has been widely accepted that the orientation and the position of the thumb plays an important role in this characteristic behavior. There have been numerous attempts to develop anthropomorphic robotic hands with varying levels of success. Nevertheless, manipulation ability in those hands is to be ameliorated even though they can grasp objects successfully. An appropriate model of the thumb is important to manipulate the objects against the fingers and to maintain the stability. Modeling these complex interactions about the mechanical axes of the joints and how to incorporate these joints in robotic thumbs is a challenging task. This article presents a review of the biomechanics of the human thumb and the robotic thumb designs to identify opportunities for future anthropomorphic robotic hands

Robotic manipulator inspired by human fingers based on tendon-driven soft grasping

Die menschliche Hand ist in der Lage, verschiedene Greif- und Manipulationsaufgaben auszuführen und kann als einer der geschicktesten und vielseitigsten Effektoren angesehen werden. In dieser Arbeit wurde ein Soft Robotic-Greifer entwickelt, der auf den Erkenntnissen aus der Literatur zur Taxonomie der menschlichen Greiffähigkeiten und den biomechanischen Synergien der menschlichen Hand basiert. Im Bereich der Roboterhände sind sehnengetriebene, unteraktuierte Strukturen weit verbreitet. Inspiriert von der Anatomie der menschlichen Hand, bieten sie durch ihre Flexibilität passive Adaptivität und Robustheit. Es wurde ein Sensorsystem implementiert, bestehend aus Force Sensing Resistors (FSRs), Biegungssensoren und einem Stromsensor, wodurch das System charakterisiert werden kann. Die Kraftsensoren wurden in die Fingerkuppen integriert. In Anlehnung an die menschliche Haut wurden Abgüsse aus Silikonkautschuk an den Fingerballen verwendet. Diese versprechen eine erhöhte Reibung und bessere Adaptivität zum gegriffenen Objekt. Um den entwickelten Greifer zu evaluieren, wurden erste Tests durchgeführt. Zunächst wurde die Funktionalität der Sensoren, wie z.B. der als FSRs ausgewählten Kraftsensoren, getestet. Im weiteren Verlauf wurden die Greiffähigkeiten des Greifers durch Manipulation verschiedener Objekte getestet. Basierend auf den Erkenntnissen aus den praktischen Versuchen kann festgestellt werden, dass der entwickelte Greifer ein hohes Maß an Geschicklichkeit aufweist. Auch die Adaptivität ist dank der verwendeten mechanischen Komponenten gewährleistet. Mittels der Sensorik ist es möglich, den Greifprozess zu kontrollieren. Die Ergebnisse zeigen aber auch, dass z. B. die interne Systemreibung die Verlustleistung des Systems stark beeinflusst.The human hand is able to perform various grasping and manipulation tasks, and can be seen as one of the most dexterous and versatile effectors known. The prehensile capabilities of the hand have already been analyzed, categorized and summarized in a taxonomy in numerous studies. In addition to the taxonomies, research on the biomechanical synergies of the human hand led to the following conceptions: The adduction/abduction movement is independent of the flexion/extension movement. Furthermore, the thumb is rather independent in its mobility from the other fingers, while those move synchronously within their corresponding joints. Lastly, the consideration of the synergies provides that the proximal and distal interphalangeal joints of a human finger are more intensely coordinated than those of the metacarpal joints. In this work, a soft robotic gripper was developed based on the knowledge from the literature on the taxonomy of human gripping abilities and the biomechanical synergies of the human hand. In the domain of robotic hands, tendon-driven underactuated structures are widely used. Inspired by the tensegrity structure of the human hand, they offer passive adaptivity and robustness through their flexibility. A sensor system was implemented, consisting of FSRs, flex sensors and a current sensor, thus the system parameters can be characterized continously. The force sensors were integrated into the fingertips. Molds of silicone rubber were used as finger pads to provide higher friction and better adaptivity to the grasped object on the contact areas of the finger, to mimic human skin. Initial tests were carried out to evaluate the gripper. First, the functionality of the sensors, such as the force sensors selected as FSRs, was tested. In the further course, the gripping capabilities of the gripper were tested by manipulation of various different objects. Based on the findings from the practical experiments, it may be stated that the gripper has a high degree of dexterity. Thanks to the mechanical components used, adaptivity is guaranteed as well. By means of the sensor system it is possible to control the gripping processes. However, the results also showed that, for example, the internal system friction dominates the system’s power dissipation

3D printed flexure hinges for soft monolithic prosthetic fingers

Mechanical compliance is one of the primary properties of structures in nature playing a key role in their efficiency. This study investigates a number of commonly used flexure hinges to determine a flexure hinge morphology, which generates large displacements under a lowest possible force input. The aim of this is to design a soft and monolithic robotic finger. Fused deposition modeling, a low-cost 3D printing technique, was used to fabricate the flexure hinges and the soft monolithic robotic fingers. Experimental and finite element analyses suggest that a nonsymmetric elliptical flexure hinge is the most suitable type for use in the soft monolithic robotic finger. Having estimated the effective elastic modulus, flexion of the soft monolithic robotic fingers was simulated and this showed a good correlation with the actual experimental results. The soft monolithic robotic fingers can be employed to handle objects with unknown shapes and are also potential low-cost candidates for establishing soft and one-piece prosthetic hands with light weight. A three-finger gripper has been constructed using the identified flexure hinge to handle objects with irregular shapes such as agricultural products

The PRISMA Hand II: A Sensorized Robust Hand for Adaptive Grasp and In-Hand Manipulation

Although substantial progresses have been made in building anthropomorphic robotic hands, lack of mechanical robustness, dexterity and force sensation still restrains wide adoption of robotic prostheses. This paper presents the design and preliminary evaluation of the PRISMA hand II, which is a mechanically robust anthropomorphic hand developed at the PRISMA Lab of University of Naples Federico II. The hand is highly underactuated, as the 19 finger joints are driven by three motors via elastic tendons. Nevertheless, the hand can performs not only adaptive grasps but also in-hand manipulation. The hand uses rolling contact joints, which is compliant in multiple directions. Force sensor are integrated to each fingertip in order to provide force feedback during grasping and manipulation. Preliminary experiments have been performed to evaluate the hand. Results show that the hand can perform various grasps and in-hand manipulation, while the structure can withstand severe disarticulation. This suggests that the proposed design can be a viable solution for robust and dexterous prosthetic hands

Innovative robot hand designs of reduced complexity for dexterous manipulation

This thesis investigates the mechanical design of robot hands to sensibly reduce the system complexity in terms of the number of actuators and sensors, and control needs for performing grasping and in-hand manipulations of unknown objects. Human hands are known to be the most complex, versatile, dexterous manipulators in nature, from being able to operate sophisticated surgery to carry out a wide variety of daily activity tasks (e.g. preparing food, changing cloths, playing instruments, to name some). However, the understanding of why human hands can perform such fascinating tasks still eludes complete comprehension. Since at least the end of the sixteenth century, scientists and engineers have tried to match the sensory and motor functions of the human hand. As a result, many contemporary humanoid and anthropomorphic robot hands have been developed to closely replicate the appearance and dexterity of human hands, in many cases using sophisticated designs that integrate multiple sensors and actuators---which make them prone to error and difficult to operate and control, particularly under uncertainty. In recent years, several simplification approaches and solutions have been proposed to develop more effective and reliable dexterous robot hands. These techniques, which have been based on using underactuated mechanical designs, kinematic synergies, or compliant materials, to name some, have opened up new ways to integrate hardware enhancements to facilitate grasping and dexterous manipulation control and improve reliability and robustness. Following this line of thought, this thesis studies four robot hand hardware aspects for enhancing grasping and manipulation, with a particular focus on dexterous in-hand manipulation. Namely: i) the use of passive soft fingertips; ii) the use of rigid and soft active surfaces in robot fingers; iii) the use of robot hand topologies to create particular in-hand manipulation trajectories; and iv) the decoupling of grasping and in-hand manipulation by introducing a reconfigurable palm. In summary, the findings from this thesis provide important notions for understanding the significance of mechanical and hardware elements in the performance and control of human manipulation. These findings show great potential in developing robust, easily programmable, and economically viable robot hands capable of performing dexterous manipulations under uncertainty, while exhibiting a valuable subset of functions of the human hand.Open Acces

Sensors for Robotic Hands: A Survey of State of the Art

Recent decades have seen significant progress in the field of artificial hands. Most of the surveys, which try to capture the latest developments in this field, focused on actuation and control systems of these devices. In this paper, our goal is to provide a comprehensive survey of the sensors for artificial hands. In order to present the evolution of the field, we cover five year periods starting at the turn of the millennium. At each period, we present the robot hands with a focus on their sensor systems dividing them into categories, such as prosthetics, research devices, and industrial end-effectors.We also cover the sensors developed for robot hand usage in each era. Finally, the period between 2010 and 2015 introduces the reader to the state of the art and also hints to the future directions in the sensor development for artificial hands

Design and development of robust hands for humanoid robots

Design and development of robust hands for humanoid robot

Design and Implement Towards Enhanced Physical Interactive Performance Robot Bodies

In this thesis, it will introduce the design principle and implement details towards enhanced physical interactive performance robot bodies, which are more specically focused on under actuated principle robotic hands and articulated leg robots. Since they both signicantly function as the physical interactive robot bodies against external environment, while their current performance can hardly satisfy the requirement of undertaking missions in real application. Regarding to the enhanced physical interactive performances, my work will emphasis on the three following specific functionalities, high energy efficiency, high strength and physical sturdiness in both robotics actuation and mechanism. For achieving the aforementioned targets, multiple design methods have been applied, rstly the elastic energy storage elements and compliant actuation have been adopted in legged robots as Asymmetrical Compliant Actuation (ACA), implemented for not only single joint but also multiple joints as mono and biarticulation congurations in order to achieve higher energy effciency motion. Secondly the under actuated principle and modular nger design concept have been utilized on the development of robotic hands for enhancing the grasping strength and physical sturdiness meanwhile maintaining the manipulation dexterity. Lastly, a novel high payload active tuning Parallel Elastic Actuation (PEA) and Series Elastic Actuation (SEA) have been adopted on legged robots for augmenting energy eciency and physical sturdiness. My thesis contribution relies on the novel design and implement of robotics bodies for enhancing physical interactive performance and we experimentally veried the design effectiveness in specic designed scenario and practical applications

A 3D-Printed Omni-Purpose Soft Gripper

Numerous soft grippers have been developed based on smart materials, pneumatic soft actuators, and underactuated compliant structures. In this article, we present a three-dimensional (3-D) printed omni-purpose soft gripper (OPSOG) that can grasp a wide variety of objects with different weights, sizes, shapes, textures, and stiffnesses. The soft gripper has a unique design that incorporates soft fingers and a suction cup that operate either separately or simultaneously to grasp specific objects. A bundle of 3-D-printable linear soft vacuum actuators (LSOVA) that generate a linear stroke upon activation is employed to drive the tendon-driven soft fingers. The support, fingers, suction cup, and actuation unit of the gripper were printed using a low-cost and open-source fused deposition modeling 3-D printer. A single LSOVA has a blocked force of 30.35 N, a rise time of 94 ms, a bandwidth of 2.81 Hz, and a lifetime of 26 120 cycles. The blocked force and stroke of the actuators are accurately predicted using finite element and analytical models. The OPSOG can grasp at least 20 different objects. The gripper has a maximum payload-to-weight ratio of 7.06, a grip force of 31.31 N, and a tip blocked force of 3.72 N

The SmartHand transradial prosthesis

<p>Abstract</p> <p>Background</p> <p>Prosthetic components and control interfaces for upper limb amputees have barely changed in the past 40 years. Many transradial prostheses have been developed in the past, nonetheless most of them would be inappropriate if/when a large bandwidth human-machine interface for control and perception would be available, due to either their limited (or inexistent) sensorization or limited dexterity. <it>SmartHand </it>tackles this issue as is meant to be clinically experimented in amputees employing different neuro-interfaces, in order to investigate their effectiveness. This paper presents the design and on bench evaluation of the SmartHand.</p> <p>Methods</p> <p>SmartHand design was bio-inspired in terms of its physical appearance, kinematics, sensorization, and its multilevel control system. Underactuated fingers and differential mechanisms were designed and exploited in order to fit all mechatronic components in the size and weight of a natural human hand. Its sensory system was designed with the aim of delivering significant afferent information to the user through adequate interfaces.</p> <p>Results</p> <p>SmartHand is a five fingered self-contained robotic hand, with 16 degrees of freedom, actuated by 4 motors. It integrates a bio-inspired sensory system composed of 40 proprioceptive and exteroceptive sensors and a customized embedded controller both employed for implementing automatic grasp control and for potentially delivering sensory feedback to the amputee. It is able to perform everyday grasps, count and independently point the index. The weight (530 g) and speed (closing time: 1.5 seconds) are comparable to actual commercial prostheses. It is able to lift a 10 kg suitcase; slippage tests showed that within particular friction and geometric conditions the hand is able to stably grasp up to 3.6 kg cylindrical objects.</p> <p>Conclusions</p> <p>Due to its unique embedded features and human-size, the SmartHand holds the promise to be experimentally fitted on transradial amputees and employed as a bi-directional instrument for investigating -during realistic experiments- different interfaces, control and feedback strategies in neuro-engineering studies.</p