Issues in providing a reliable multicast facility

Issues involved in point-to-multipoint communication are presented and the literature for proposed solutions and approaches surveyed. Particular attention is focused on the ideas and implementations that align with the requirements of the environment of interest. The attributes of multicast receiver groups that might lead to useful classifications, what the functionality of a management scheme should be, and how the group management module can be implemented are examined. The services that multicasting facilities can offer are presented, followed by mechanisms within the communications protocol that implements these services. The metrics of interest when evaluating a reliable multicast facility are identified and applied to four transport layer protocols that incorporate reliable multicast

Multicast Mobility in Mobile IP Version 6 (MIPv6) : Problem Statement and Brief Survey

Publisher PD

Issues in designing transport layer multicast facilities

Multicasting denotes a facility in a communications system for providing efficient delivery from a message's source to some well-defined set of locations using a single logical address. While modem network hardware supports multidestination delivery, first generation Transport Layer protocols (e.g., the DoD Transmission Control Protocol (TCP) (15) and ISO TP-4 (41)) did not anticipate the changes over the past decade in underlying network hardware, transmission speeds, and communication patterns that have enabled and driven the interest in reliable multicast. Much recent research has focused on integrating the underlying hardware multicast capability with the reliable services of Transport Layer protocols. Here, we explore the communication issues surrounding the design of such a reliable multicast mechanism. Approaches and solutions from the literature are discussed, and four experimental Transport Layer protocols that incorporate reliable multicast are examined

ADAPTIVE ROUTING BASED ON DELAY TRUSTED ROUTING IN ADHOC NETWORK

Existing network hardware is constantly being improved and new communication technology continues to be developed. Together with the trend that computing hardware becomes smaller and portable, this network technology progress has led to dynamic networks. Next generation wireless networks are characterized as heterogeneous networks, particularly in terms of its underlying technology. One of the challenges of these heterogeneous networks is to manage handoff. Mobile IP is chosen for managing the handoff to accommodate the all-IP vision of the future interconnected networks. However, the handoff management of the mobile IP is mainly for data services where delay is not of a major concern. Therefore, it would be considerable challenge to achieve low latency handoff for real-time services. In this paper, we propose a multicasting scheme for delay-sensitive applications

A performance model of communication in the quarc NoC

Networks on-chip (NoC) emerged as a promising communication medium for future MPSoC development. To serve this purpose, the NoCs have to be able to efficiently exchange all types of traffic including the collective communications at a reasonable cost. The Quarc NoC is introduced as a NOC which is highly efficient in performing collective communication operations such as broadcast and multicast. This paper presents an introduction to the Quarc scheme and an analytical model to compute the average message latency in the architecture. To validate the model we compare the model latency prediction against the results obtained from discrete-event simulations

Multicast source mobility support for regenerative satellite networks

YesSatellite communications provides an effective solution to the ever increasing demand for mobile and ubiquitous communications especially in areas where terrestrial communication infrastructure is not present. IP multicasting is a bandwidth saving technology which could become an indispensable means of group communication over satellites since it can utilise the scarce and expensive satellite resources in an efficient way. In Source-Specific Multicast (SSM) the data is sent through a multicast tree from the source to all the receivers. However, if a source is a mobile node moving from one network to another, then special mechanisms are required to make sure this multicast tree does not break. Until now, while many research efforts have been made to provide IP multicast for the mobile nodes, they are mainly focused on terrestrial networks. Unfortunately, the terrestrial mobile multicast schemes are not directly applicable in a satellite environment. This paper, proposes a new mechanism to support multicast source mobility in SSM based applications for a mesh multi-beam satellite network with receivers both within the satellite network and in the Internet. In the proposed mechanism, the SSM receivers continue to receive multicast traffic from the mobile source despite the fact that the IP address of the source keeps on changing as it changes its point of attachment from one satellite gateway (GW) to another. The proposed scheme is evaluated and the results compared with the mobile IP home subscription (MIP HS)-based approach. The results show that the proposed scheme outperforms the MIP HS-based approach in terms of signalling cost and packet delivery cost

Improving Multicast Communications Over Wireless Mesh Networks

In wireless mesh networks (WMNs) the traditional approach to shortest path tree based multicasting is to cater for the needs of the poorest performingnode i.e. the maximum permitted multicast line rate is limited to the lowest line rate used by the individual Child nodes on a branch. In general, this meansfixing the line rate to its minimum value and fixing the transmit power to its maximum permitted value. This simplistic approach of applying a single multicast rate for all nodes in the multicast group results in a sub-optimal trade-off between the mean network throughput and coverage area that does not allow for high bandwidth multimedia applications to be supported. By relaxing this constraint and allowing multiple line rates to be used, the mean network throughput can be improved. This thesis presents two methods that aim to increase the mean network throughput through the use of multiple line rates by the forwarding nodes. This is achieved by identifying the Child nodes responsible for reducing the multicast group rate. The first method identifies specific locations for the placement of relay nodes which allows for higher multicast branch line rates to be used. The second method uses a power control algorithm to tune the transmit power to allow for higher multicast branch line rates. The use of power control also helps to reduce the interference caused to neighbouring nodes.Through extensive computer simulation it can be shown that these two methods can lead to a four-fold gain in the mean network throughput undertypical WMN operating conditions compared with the single line rate case