Unrest at Domuyo Volcano, Argentina, detected by geophysical and geodetic data and morphometric analysis

New volcanic unrest has been detected in the Domuyo Volcanic Center (DVC), to the east of the Andes Southern Volcanic Zone in Argentina. To better understand this activity, we investigated new seismic monitoring data, gravimetric and magnetic campaign data, and interferometric synthetic aperture radar (InSAR) deformation maps, and we derived an image of the magma plumbing system and the likely source of the unrest episode. Seismic events recorded during 2017-2018 nucleate beneath the southwestern flank of the DVC. Ground deformation maps derived from InSAR processing of Sentinel-1 data exhibit an inflation area exceeding 300 km2, from 2014 to at least March 2018, which can be explained by an inflating sill model located 7 km deep. The Bouguer anomaly reveals a negative density contrast of ~35 km wavelength, which is spatially coincident with the InSAR pattern. Our 3D density modeling suggests a body approximately 4-6 km deep with a density contrast of -550 kg/m3. Therefore, the geophysical and geodetic data allow identification of the plumbing system that is subject to inflation at these shallow crustal depths. We compared the presence and dimensions of the inferred doming area to the drainage patterns of the area, which support long-established incremental uplift according to morphometric analysis. Future studies will allow us to investigate further whether the new unrest is hydrothermal or magmatic in origin.Fil: Astort, Ana. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Estudios Andinos "Don Pablo Groeber". Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Estudios Andinos "Don Pablo Groeber"; ArgentinaFil: Walter, Thomas R. German Research Centre for Geosciences; AlemaniaFil: Ruiz, Francisco. Universidad Nacional de San Juan. Facultad de Ciencias Exactas, Físicas y Naturales. Instituto Geofísico Sismológico Volponi; ArgentinaFil: Sagripanti, Lucía. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Estudios Andinos "Don Pablo Groeber". Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Estudios Andinos "Don Pablo Groeber"; ArgentinaFil: Nacif, Andres Antonio. Universidad Nacional de San Juan. Facultad de Ciencias Exactas, Físicas y Naturales. Instituto Geofísico Sismológico Volponi; ArgentinaFil: Acosta, Gemma. Universidad Nacional de San Juan. Facultad de Ciencias Exactas, Físicas y Naturales. Instituto Geofísico Sismológico Volponi; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Folguera Telichevsky, Andres. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Ciudad Universitaria. Instituto de Estudios Andinos "Don Pablo Groeber". Universidad de Buenos Aires. Facultad de Ciencias Exactas y Naturales. Instituto de Estudios Andinos "Don Pablo Groeber"; Argentin

Geo-structural map of the Laguna Blanca basin (Southern Central Andes, Catamarca, Argentina)

The Laguna Blanca basin is a rhomb-shaped basin located at the SE margin of the Puna plateau in the southern Central Andes (Catamarca, Argentina). An interactive analysis using remote sensing and field mapping enabled us to produce a geo-structural map at a 1:350,000 scale. Satellite images from multispectral sensors (ASTER and Landsat 7 ETM+) and medium resolution Digital Elevation Models (SRTM and ASTER GDEM) were used in order to recognize the structures and main lithologies, which were validated in the field and through laboratory tests (e.g. spectral analysis). The final result is a geo-structural map of the Laguna Blanca basin with a new geological unit subdivision, highlighting its tectonic origin, which appears to be related to a releasing stepover along N-S sinistral strike-slip master faults

Three-dimensional distribution of primary melt inclusions in garnets by X-ray microtomography

open6X-ray computed microtomography (X-mu CT) is applied here to investigate in a non-invasive way the three-dimensional (3D) spatial distribution of primary melt and fluid inclusions in gamets from the metapeitic enclaves of El Hoyazo and from the migmatitcs of Sierra Alpujata, Spain. Attention is focused on a particular case of inhomogeneous distribution of inclusions, characterized by inclusion-rich cores and almost inclusion-free rims (i.e., zonal arrangement), that has been previously investigated in detail only by means of 2D conventional methods. Different experimental X-mu CT configurations, both synchrotron radiation- and X-ray tube-based, are employed to explore the limits of the technique. The internal features of the samples are successfully imaged, with spatial resolution down to a few micrometers. By means of dedicated image processing protocols, the lighter melt and fluid inclusions can be separated from the heavier host garnet and from other non-relevant features (e.g., other mineral phases or large voids). This allows evaluating the volumetric density of inclusions within spherical shells as a function of the radial distance from the center of the host garnets. The 3D spatial distribution of heavy mineral inclusions is investigated as well and compared with that of melt inclusions. Data analysis reveals the occurrence of a clear peak of melt and fluid inclusions density, ranging approximately from 1/3 to 1/2 of the radial distance from the center of the distribution and a gradual decrease from the peak outward. heavy mineral inclusions appear to be almost absent in the central portion of the garnets and more randomly arranged, showing no correlation with the distribution of melt and fluid inclusions. To reduce the effect of geometric artifacts arising from the non-spherical shape of the distribution, the inclusion density was calculated also along narrow prisms with different orientations, obtaining plots of pseudo-linear distributions. The results show that the core-rim transition is characterized by a rapid (but not step-like) decrease in inclusion density, occurring in a continuous mode. X-ray tomographic data, combined with electron microprobe chemical profiles of selected elements, suggest that despite the inhomogeneous distribution of inclusions, the investigated garnets have grown in one single progressive episode in the presence of anatectic melt. The continuous drop of inclusion density suggests a similar decline in (radial) garnet growth, which is a natural consequence in the case of a constant reaction rate. Our results confirm the advantages of high-resolution X-mu CT compared to conventional destructive 2D observations for the analysis of the spatial distribution of micrometer-scale inclusions in minerals, owing to its non-invasive 3D capabilities. The same approach can be extended to the study of different microstructural features in samples from a wide variety of geological settings.openParisatto, Matteo; Turina, Alice; Cruciani, Giuseppe; Mancini, Lucia; Peruzzo, Luca; Cesare, BernardoParisatto, Matteo; Turina, Alice; Cruciani, Giuseppe; Mancini, Lucia; Peruzzo, Luca; Cesare, Bernard

Documenting Bronze Age Akrotiri on Thera using laser scanning, image-based modelling and geophysical prospection

The excavated architecture of the exceptional prehistoric site of Akrotiri on the Greek island of Thera/Santorini is endangered by gradual decay, damage due to accidents, and seismic shocks, being located on an active volcano in an earthquake-prone area. Therefore, in 2013 and 2014 a digital documentation project has been conducted with support of the National Geographic Society in order to generate a detailed digital model of Akrotiri’s architecture using terrestrial laser scanning and image-based modeling. Additionally, non-invasive geophysical prospection has been tested in order to investigate its potential to explore and map yet buried archaeological remains. This article describes the project and the generated results

Integrating virtual reality and GIS tools for geological mapping, data collection and analysis: an example from Metaxa Mine, Santorini (Greece)

In the present work we highlight the effectiveness of integrating different techniques and tools for better surveying, mapping and collecting data in volcanic areas. We use an Immersive Virtual Reality (IVR) approach for data collection, integrated with Geographic Information System (GIS) analysis in a well-known volcanological site in Santorini (Metaxa mine), a site where volcanic processes influenced the island’s industrial development, especially with regard to pumice mining. Specifically, we have focused on: (i) three-dimensional (3D) high-resolution IVR scenario building, based on Structure from Motion photogrammetry (SfM) modeling; (ii) subsequent geological survey, mapping and data collection using IVR; (iii) data analysis, e.g., calculation of extracted volumes, as well as production of new maps in a GIS environment using input data directly from the IVR survey; and finally, (iv) presentation of new outcomes that highlight the importance of the Metaxa Mine as a key geological and volcanological geosite

Integrating virtual reality and gis tools for geological mapping, data collection and analysis: An example from the metaxa mine, santorini (Greece)

In the present work we highlight the effectiveness of integrating different techniques and tools for better surveying, mapping and collecting data in volcanic areas. We use an Immersive Virtual Reality (IVR) approach for data collection, integrated with Geographic Information System (GIS) analysis in a well-known volcanological site in Santorini (Metaxa mine), a site where volcanic processes influenced the island’s industrial development, especially with regard to pumice mining. Specifically, we have focused on: (i) three-dimensional (3D) high-resolution IVR scenario building, based on Structure from Motion photogrammetry (SfM) modeling; (ii) subsequent geological survey, mapping and data collection using IVR; (iii) data analysis, e.g., calculation of extracted volumes, as well as production of new maps in a GIS environment using input data directly from the IVR survey; and finally, (iv) presentation of new outcomes that highlight the importance of the Metaxa Mine as a key geological and volcanological geosite

Mapping Earthquakes in Malawi Using Incorporated Research Institutions for Seismology (IRIS) Catalogue for 1972–2021

Cartographic data visualization is crucial for geological mapping in seismically active areas of Malawi. Representation of the datasets from IRIS database is beneficial for hazard risk assessment, forecasting and damage mitigation, especially for mapping the distribution and magnitude of earthquakes. Scripting cartography using Generic Mapping Tools (GMT) was used to map seismicity in Malawi Rift Zone based on IRIS catalogue for 1972–2021. The maps show relations among the elevation heights, distribution of seismic events and volcanos in the north of the Malawi Lake. The results show correlation between elevations and seismicity with local topographic depressions. Seismic data show variability of the seismicity level with more earthquakes recorded in the north of the country. This paper contributes to the regional studies of Malawi for risk assessment and geological hazard analysis

The Geochemical Data Imaging and Application in Geoscience: Taking the Northern Daxinganling Metallogenic Belt as an Example

Geochemical data were predominantly expressed by vector format, the research on geochemical data visualization, i.e., raster data format, was not paid proper attention. A total of 39 geochemical elements in 1:200,000 regional geochemical exploration data were rasterized to form images, and then a geochemical image database was generated. This article has carried out the study on geochemical imaging within Daxinganling metallogenic belt. The metallogenic belt had once carried out the regional geochemical survey, the sampling density was 1 site/4 km2, and 39 geochemistry elements including the microelement and trace element have been analyzed. Quintic polynomial method was used to implement the geochemical data interpolation, and the cell size of formed geochemical elemental image is 1 km. The images of the geochemical elements were processed by image enhancement methods, and then hyperspectral remote sensing data processing method was used for prospecting target selection, lithology mapping, and so on. The interpreted results have been verified in practice. All the abovementioned suggested a good development prospect for the rasterized geochemical images. Finally the author puts forward using rasterize geochemical images in combination with other geological, geophysical, and remote sensing data to make better use of the geochemical data and be more extensively applied in the geoscience