Experimentally characterized embedded Mckibben muscle as a nastic material for biomedical applications

This study presents the experimental results that characterize a nastic sheet material’s performance. We defined nastic sheet as a McKibben muscle designed from a foundation that would be embedded as an array in an elastomer matrix. The goal is to be able to utilize the embedded McKibben sheets in the biomedical industry as an improvement to the synthetic devices and/or processes. One mechanism that might produce these improvements is to mimic the biological materials that form functional organs, biological structures, and active tissues. Linking human technology and natural structures is and will continue to be important to society for several reasons. It would improve: (1) the lifestyle of humans in regards to artificial parts that mimic human parts (which will allow us to live longer), (2) artificial limb functionality, and (3) comfort and aesthetics. The objective is focused on characterizing and evaluating McKibben muscles as an embedded muscle sheet by building McKibben muscles and testing them alone and in sheets with one, two, three, and five muscles. The sheets would be known as a single, double, triple and quintuple embedded sheet. Another objective is to determine the performance penalty that embedding puts on the material. The experiments performed used several different approaches, such as analytical models, tensile test analysis, and prototype construction of the specimens. All specimens were designed to have a constant final length of 120mm, being embedded in a polyurethane matrix. We characterized the fundamental performance of a McKibben muscle and each specific embedded sheet. We measured the specimens’ work-density and quantified the inactive matrix’s impact on work-density. Based on the results, several improvements were suggested on the fabrication of the specimens. The experiment shows positive potential outcome that could be utilized in the biomedical field, but the results would improve with the suggestions provided in the study. A sample of the results - the actual work-density for both the single and doubleembedded sheets showed an increase to 7.82% and 2.96% consecutively. Once the specimens are removed from the mold, the McKibben muscle automatically tries to retract to its initial state while the polyurethane matrix tries to stay at its initial state

Computational Modeling and Experimental Characterization of Pneumatically Driven Actuators for the Development of a Soft Robotic Arm

abstract: Soft Poly-Limb (SPL) is a pneumatically driven, wearable, soft continuum robotic arm designed to aid humans with medical conditions, such as cerebral palsy, paraplegia, cervical spondylotic myelopathy, perform activities of daily living. To support user's tasks, the SPL acts as an additional limb extending from the human body which can be controlled to perform safe and compliant mobile manipulation in three-dimensional space. The SPL is inspired by invertebrate limbs, such as the elephant trunk and the arms of the octopus. In this work, various geometrical and physical parameters of the SPL are identified, and behavior of the actuators that comprise it are studied by varying their parameters through novel quasi-static computational models. As a result, this study provides a set of engineering design rules to create soft actuators for continuum soft robotic arms by understanding how varying parameters affect the actuator's motion as a function of the input pressure. A prototype of the SPL is fabricated to analyze the accuracy of these computational models by performing linear expansion, bending and arbitrary pose tests. Furthermore, combinations of the parameters based on the application of the SPL are determined to affect the weight, payload capacity, and stiffness of the arm. Experimental results demonstrate the accuracy of the proposed computational models and help in understanding the behavior of soft compliant actuators. Finally, based on the set functional requirements for the assistance of impaired users, results show the effectiveness of the SPL in performing tasks for activities of daily living.Dissertation/ThesisMasters Thesis Mechanical Engineering 201

Design and simulation of a pneumatic actuator bending soft robotics based on 3D printing

Robots mechatronic devices are able to replicate human actions, especially in dangerous environments and in manufacturing. Recently, the development of robotics has been inspired by bionics. The advanced robotics allow advanced robots to be used in new environments where they were not traditionally applicable, such as narrow and small spaces. Compared to traditional rigid robots, soft robots are made by deformable materials and possess high dexterity and adaptivity in harsh working environments. Traditional soft robots are made by casting. The method implies that the molds of soft robots should be designed and printed by a 3D printer first, before casting. In this thesis, a pneumatic bending actuator will be designed and printed by 3D printer directly. The direct 3D printing method saves abundant time in the overall design and printingas in rubber casting. The printing material is a hyperelastic material called NinjaFlex. Moreover, this thesis simplified the physical model to a cantilever beam with uniform distributed load. Based on the cantilever mathematical model, two types of simulation have been designed with linear material properties and nonlinear material properties. The wall thickness of the original design was set as the optimization parameters. By adjusting the thickness, the relationship between the wall thickness and the deformation of the bending actuator was obtained. By comparing the results of experiments, simulation, and theoretical modeling, we propose 3D printing of soft actuators as a novel technique to be used in the new frontier of soft robotics

RESEARCH TOWARDS THE DESIGN OF A NOVEL SMART FLUID DAMPER USING A MCKIBBEN ACTUATOR

Vibration reducing performance of many mechanical systems, decreasing the quality of manufactured products, producing noise, generating fatigue in mechanical components, and producing an uncomfortable environment for human bodies. Vibration control is categorized as: active, passive, or semi-active, based on the power consumption of the control system and feedback or feed forward based on whether sensing is used to control vibration. Semi-active vibration control is the most attractive method; one method of semi-active vibration control could be designed by using smart fluid. Smart fluids are able to modify their effective viscosity in response to an external stimulus such as a magnetic field. This unique characteristic can be utilised to build semi-active dampers for a wide variety of vibration control systems. Previous work has studied the application of smart fluids in semi-active dampers, where the kinetic energy of a vibrating structure can be dissipated in a controllable fashion. A McKibben actuator is a device that consists of a rubber tube surrounded by braided fibre material. It has different advantages over a piston/cylinder actuator such as: a high power to weight ratio, low weight and less cost. Recently McKibben actuator has appeared in some semi-active vibration control devise. This report investigates the possibility of designing a Magnetorheological MR damper that seeks to reduce the friction in the device by integrating it with a McKibben actuator. In this thesis the concept of both smart fluid and McKibben actuator have been reviewed in depth, and methods of modelling and previous applications of devices made using these materials are also presented. The experimental part of the research includes: designing and modelling a McKibben actuator (using water) under static loads, and validating the model experimentally. The research ends by presenting conclusions and future work

Design and control of a novel variable stiffness soft arm

Soft robot arms possess such characteristics as light weight, simple structure and good adaptability to the environment, among others. On the other hand, robust control of soft robot arms presents many difficulties. Based on these reasons, this paper presents a novel design and modelling of a fuzzy active disturbance rejection control (FADRC) controller for a soft PAM arm. The soft arm comprises three contractile and one extensor PAMs, which can vary its stiffness independently of its position in space. Force analysis for the soft arm is conducted, and stiffness model of the arm is established based on the relational model of contractile and extensor PAM. The accuracy of stiffness model for the soft arm was verified through experiments. Associated to this, a controller based on the fuzzy adaptive theory and ADRC, FADRC, has been designed to control the arm. The fuzzy adaptive theory is used to adjust the parameters of the ADRC, the control algorithm has the ability to control stiffness and position of the soft arm. In this paper, FADRC was further verified through comparative experiments on the soft arm. This paper reinforces the hypothesis that FADRC control, as an algorithm, indeed possesses good robustness and adaptive abilities. Key words: soft robot, variable stiffness, PAM, stiffness modelling, FADR

Wearable exoskeleton systems based-on pneumatic soft actuators and controlled by parallel processing

Human assistance innovation is essential in an increasingly aging society and one technology that may be applicable is exoskeletons. However, traditional rigid exoskeletons have many drawbacks. This research includes the design and implementation of upper-limb power assist and rehabilitation exoskeletons based on pneumatic soft actuators. A novel extensor-contractor pneumatic muscle has been designed and constructed. This new actuator has bidirectional action, allowing it to both extend and contract, as well as create force in both directions. A mathematical model has been developed for the new novel actuator which depicts the output force of the actuator. Another new design has been used to create a novel bending pneumatic muscle, based on an extending McKibben muscle and modelled mathematically according to its geometric parameters. This novel bending muscle design has been used to create two versions of power augmentation gloves. These exoskeletons are controlled by adaptive controllers using human intention. For finger rehabilitation a glove has been developed to bend the fingers (full bending) by using our novel bending muscles. Inspired by the zero position (straight fingers) problem for post-stroke patients, a new controllable stiffness bending actuator has been developed with a novel prototype. To control this new rehabilitation exoskeleton, online and offline controller systems have been designed for the hand exoskeleton and the results have been assessed experimentally. Another new design of variable stiffness actuator, which controls the bending segment, has been developed to create a new version of hand exoskeletons in order to achieve more rehabilitation movements in the same single glove. For Forearm rehabilitation, a rehabilitation exoskeleton has been developed for pronation and supination movements by using the novel extensor-contractor pneumatic muscle. For the Elbow rehabilitation an elbow rehabilitation exoskeleton was designed which relies on novel two-directional bending actuators with online and offline feedback controllers. Lastly for upper-limb joint is the wrist, we designed a novel all-directional bending actuator by using the moulding bladder to develop the wrist rehabilitation exoskeleton by a single all-directional bending muscle. Finally, a totally portable, power assistive and rehabilitative prototype has been developed using a parallel processing intelligent control chip

Soft manipulators and grippers: A review

Soft robotics is a growing area of research which utilizes the compliance and adaptability of soft structures to develop highly adaptive robotics for soft interactions. One area in which soft robotics has the ability to make significant impact is in the development of soft grippers and manipulators. With an increased requirement for automation, robotics systems are required to perform task in unstructured and not well defined environments; conditions which conventional rigid robotics are not best suited. This requires a paradigm shift in the methods and materials used to develop robots such that they can adapt to and work safely in human environments. One solution to this is soft robotics, which enables soft interactions with the surroundings while maintaining the ability to apply significant force. This review paper assesses the current materials and methods, actuation methods and sensors which are used in the development of soft manipulators. The achievements and shortcomings of recent technology in these key areas are evaluated, and this paper concludes with a discussion on the potential impacts of soft manipulators on industry and society

Novel Integrated System Architecture for an Autonomous Jumping Micro-Robot

As the capability and complexity of robotic platforms continue to evolve from the macro to micro-scale, innovation of such systems is driven by the notion that a robot must be able to sense, think, and act [1]. The traditional architecture of a robotic platform consists of a structural layer upon which, actuators, controls, power, and communication modules are integrated for optimal system performance. The structural layer, for many micro-scale platforms, has commonly been implemented using a silicon die, thus leading to robotic platforms referred to as "walking chips" [2]. In this thesis, the first-ever jumping microrobotic platform is demonstrated using a hybrid integration approach to assemble on-board sensing and power directly onto a polymer chassis. The microrobot detects a change in light intensity and ignites 0.21mg of integrated nanoporous energetic silicon, resulting in 246µJ of kinetic energy and a vertical jump height of 8cm

Design and Analysis of Soft Actuator with Enhanced Stiffness with Granular Jamming

The field of soft robotics has been increasing popularity and importance in last decade with its groundbreaking applications in the field of delicate food handling industry and rehabilitation of limbs and fingers of stroke affected patients. The area of soft robotics seeks to improve robot safety, allowing them to function in circumstances where standard robots cannot. This research is focused on pneumatically actuated soft robots as they are efficient, easily controlled, affordable, and well researched. These robots consist of one or more soft actuators, made of silicone elastomers with low material hardness. Low hardness silicone actuators are structurally weak and cannot generate functional forces, which can be rectified by simply increasing the hardness of the material, resulting in compromising softness of the robot. This research attempts to provide a solution to increase structural stability and force output of soft actuator without compromising softness of the material. These were achieved in two ways; one, by improving the cross-sectional profile of the actuator, with an addition of vacuum functionality which increases degree of freedom by one. Two, by attaching a granular jamming component to the actuator, which can change its stiffness actively based on the vacuum applied to it. In this research, the soft actuator was made of Eco-Flex 00-30 silicone and ground coffee was used as granular material for jamming. The actuator was designed on CATIA, and simulation analysis was carried out in ANSYS. A simulation study is conducted to optimize the design parameters to improve bending angle. The jamming components are attached on either side of the actuator and filled with ground coffee which provides controlled stiffness. The actuator was fabricated by molding, all molds are 3D printed with polylactic acid. The actuator was powered by an electric air pump. The actuator is evaluated for bending angle and blocking force at the tip. 280% more bending was achieved under vacuum when compared to conventional design. The blocking force was increased by 270% upon implementing jamming component. The force output obtained per unit pressure applied when compared to present literature increased by 4 times. Lastly, these methods can be implemented to improve the performance of any soft pneumatic actuators