352 research outputs found
An Innovative MIMO Iterative Learning Control Approach for the Position Control of a Hydraulic Press
To improve the performance of hydraulic press position control and eliminate the need to manually define control signals, this paper proposes a multi-input-multi-output (MIMO) Iterative Learning Control (ILC) algorithm. The MIMO ILC algorithm design is based on the inversion of the known low frequency dynamics of the hydraulic press, whereas the unknown and uncertain high frequency dynamics are discarded due to their low influence in the learning transient. Moreover, for the MIMO ILC convergence condition, a graphical method is proposed, in which the ILC learning filter eigenvalues are analyzed. This method allows studying the stability and convergence rate of the algorithm intuitively. Theoretical analysis and results prove that with the MIMO ILC algorithm the position control is automated and that high precision in the position tracking is gained. A comparison with other model inverse ILC approaches is carried out and it is shown that the proposed MIMO ILC algorithm outperforms the existing algorithms, reducing the number of iterations required to converge while guaranteeing system stability. Furthermore, experimental results in a hydraulic test rig are presented and compared to those obtained with a conventional PI controllerThis work was supported in part by the Department of Development and Infrastructures of the Government of the Basque Country via
Industrial Doctorate Program BIKAINTEK under Grant 20-AF-W2-2018-00015
Performance Improvement of Low-Cost Iterative Learning-Based Fuzzy Control Systems for Tower Crane Systems
This paper is dedicated to the memory of Prof. Ioan Dzitac, one of the fathers of this journal and its founding Editor-in-Chief till 2021. The paper addresses the performance improvement of three Single Input-Single Output (SISO) fuzzy control systems that control separately the positions of interest of tower crane systems, namely the cart position, the arm angular position and the payload position. Three separate low-cost SISO fuzzy controllers are employed in terms of first order discrete-time intelligent Proportional-Integral (PI) controllers with Takagi-Sugeno-Kang Proportional-Derivative (PD) fuzzy terms. Iterative Learning Control (ILC) system structures with PD learning functions are involved in the current iteration SISO ILC structures. Optimization problems are defined in order to tune the parameters of the learning functions. The objective functions are defined as the sums of squared control errors, and they are solved in the iteration domain using the recent metaheuristic Slime Mould Algorithm (SMA). The experimental results prove the performance improvement of the SISO control systems after ten iterations of SMA
MULTI-RATE VISUAL FEEDBACK ROBOT CONTROL
[EN] This thesis deals with two characteristic problems in visual feedback robot control: 1) sensor latency; 2) providing suitable trajectories for the robot and for the measurement in the image. All the approaches presented in this work are analyzed and implemented on a 6 DOF industrial robot manipulator or/and a wheeled robot.
Focusing on the sensor latency problem, this thesis proposes the use of dual-rate high order holds within the control loop of robots. In this sense, the main contributions are:
- Dual-rate high order holds based on primitive functions for robot control (Chapter 3): analysis of the system performance with and without the use of this multi-rate technique from non-conventional control. In addition, as consequence of the use of dual-rate holds, this work obtains and validates multi-rate controllers, especially dual-rate PIDs.
- Asynchronous dual-rate high order holds based on primitive functions with time delay compensation (Chapter 3): generalization of asynchronous dual-rate high order holds incorporating an input signal time delay compensation component, improving thus the inter-sampling estimations computed by the hold. It is provided an analysis of the properties of such dual-rate holds with time delay compensation, comparing them with estimations obtained by the equivalent dual-rate holds without this compensation, as well as their implementation and validation within the control loop of a 6 DOF industrial robot manipulator.
- Multi-rate nonlinear high order holds (Chapter 4): generalization of the concept of dual-rate high order holds with nonlinear estimation models, which include information about the plant to be controlled, the controller(s) and sensor(s) used, obtained from machine learning techniques. Thus, in order to obtain such a nonlinear hold, it is described a methodology non dependent of the machine technique used, although validated using artificial neural networks. Finally, an analysis of the properties of these new holds is carried out, comparing them with their equivalents based on primitive functions, as well as their implementation and validation within the control loop of an industrial robot manipulator and a wheeled robot.
With respect to the problem of providing suitable trajectories for the robot and for the measurement in the image, this thesis presents the novel reference features filtering control strategy and its generalization from a multi-rate point of view. The main contributions in this regard are:
- Reference features filtering control strategy (Chapter 5): a new control strategy is proposed to enlarge significantly the solution task reachability of robot visual feedback control. The main idea is to use optimal trajectories proposed by a non-linear EKF predictor-smoother (ERTS), based on Rauch-Tung-Striebel (RTS) algorithm, as new feature references for an underlying visual feedback controller. In this work it is provided both the description of the implementation algorithm and its implementation and validation utilizing an industrial robot manipulator.
- Dual-rate Reference features filtering control strategy (Chapter 5): a generalization of the reference features filtering approach from a multi-rate point of view, and a dual Kalman-smoother step based on the relation of the sensor and controller frequencies of the reference filtering control strategy is provided, reducing the computational cost of the former algorithm, as well as addressing the problem of the sensor latency. The implementation algorithms, as well as its analysis, are described.[ES] La presente tesis propone soluciones para dos problemas característicos de los sistemas robóticos cuyo bucle de control se cierra únicamente empleando sensores de visión artificial: 1) la latencia del sensor; 2) la obtención de trayectorias factibles tanto para el robot así como para las medidas obtenidas en la imagen. Todos los métodos propuestos en este trabajo son analizados, validados e implementados utilizando brazo robot industrial de 6 grados de libertad y/o en un robot con ruedas.
Atendiendo al problema de la latencia del sensor, esta tesis propone el uso de retenedores bi-frequencia de orden alto dentro de los lazos de control de robots. En este aspecto las principales contribuciones son:
-Retenedores bi-frecuencia de orden alto basados en funciones primitivas dentro de lazos de control de robots (Capítulo 3): análisis del comportamiento del sistema con y sin el uso de esta técnica de control no convencional. Además, como consecuencia del empleo de los retenedores, obtención y validación de controladores multi-frequencia, concretamente de PIDs bi-frecuencia.
-Retenedores bi-frecuencia asíncronos de orden alto basados en funciones primitivas con compensación de retardos (Capítulo 3): generalización de los retenedores bi-frecuencia asíncronos de orden alto incluyendo una componente de compensación del retardo en la señal de entrada, mejorando así las estimaciones inter-muestreo calculadas por el retenedor. Se proporciona un análisis de las propiedades de los retenedores con compensación del retardo, comparándolas con las obtenidas por sus predecesores sin compensación, así como su implementación y validación en un brazo robot de 6 grados de libertad.
-Retenedores multi-frecuencia no lineales de orden alto (Capítulo 4): generalización del concepto de retenedor bi-frecuencia de orden alto con modelos de estimación no lineales, los cuales incluyen información tanto de la planta a controlar, como del controlador(es) y sensor(es) empleado(s), obtenida a partir de técnicas de aprendizaje. Así pues, para obtener dicho retenedor no lineal, se describe una metodología independiente de la herramienta de aprendizaje utilizada, aunque validada con el uso de redes neuronales artificiales. Finalmente se realiza un análisis de las propiedades de estos nuevos retenedores, comparándolos con sus predecesores basados en funciones primitivas, así como su implementación y validación en un brazo robot de 6 grados de libertad y en un robot móvil con ruedas.
Por lo que respecta al problema de generación de trayectorias factibles para el robot y para la medida en la imagen, esta tesis propone la nueva estrategia de control basada en el filtrado de la referencia y su generalización desde el punto de vista multi-frecuencial.
-Estrategia de control basada en el filtrado de la referencia (Capítulo 5): una nueva estrategia de control se propone para ampliar significativamente el espacio de soluciones de los sistemas robóticos realimentados con sensores de visión artificial. La principal idea es utilizar las trayectorias óptimas obtenidas por una trayectoria predicha por un filtro de Kalman seguido de un suavizado basado en el algoritmo Rauch-Tung-Striebel (RTS) como nuevas referencias para un controlador dado. En este trabajo se proporciona tanto la descripción del algoritmo como su implementación y validación empleando un brazo robótico industrial.
-Estrategia de control bi-frecuencia basada en el filtrado de la referencia (Capítulo 5): generalización de la estrategia de control basada en filtrado de la referencia desde un punto de vista multi-frecuencial, con un filtro de Kalman multi-frecuencia y un Kalman-smoother dual basado en la relación existente entre las frecuencias del sensor y del controlador, reduciendo así el coste computacional del algoritmo y, al mismo tiempo, dando solución al problema de la latencia del sensor. La validación se realiza utilizando un barzo robot industria asi[CA] La present tesis proposa solucions per a dos problemes característics dels sistemes robòtics el els que el bucle de control es tanca únicament utilitzant sensors de visió artificial: 1) la latència del sensor; 2) l'obtenció de trajectòries factibles tant per al robot com per les mesures en la imatge. Tots els mètodes proposats en aquest treball son analitzats, validats e implementats utilitzant un braç robot industrial de 6 graus de llibertat i/o un robot amb rodes.
Atenent al problema de la latència del sensor, esta tesis proposa l'ús de retenidors bi-freqüència d'ordre alt a dins del llaços de control de robots. Al respecte, les principals contribucions son:
- Retenidors bi-freqüència d'ordre alt basats en funcions primitives a dintre dels llaços de control de robots (Capítol 3): anàlisis del comportament del sistema amb i sense l'ús d'aquesta tècnica de control no convencional. A més a més, com a conseqüència de l'ús dels retenidors, obtenció i validació de controladors multi-freqüència, concretament de PIDs bi-freqüència.
- Retenidors bi-freqüència asíncrons d'ordre alt basats en funcions primitives amb compensació de retards (Capítol 3): generalització dels retenidors bi-freqüència asíncrons d'ordre alt inclouen una component de compensació del retràs en la senyal d'entrada al retenidor, millorant així les estimacions inter-mostreig calculades per el retenidor. Es proporciona un anàlisis de les propietats dels retenidors amb compensació del retràs, comparant-les amb les obtingudes per el seus predecessors sense la compensació, així com la seua implementació i validació en un braç robot industrial de 6 graus de llibertat.
- Retenidors multi-freqüència no-lineals d'ordre alt (Capítol 4): generalització del concepte de retenidor bi-freqüència d'ordre alt amb models d'estimació no lineals, incloent informació tant de la planta a controlar, com del controlador(s) i sensor(s) utilitzat(s), obtenint-la a partir de tècniques d'aprenentatge. Així doncs, per obtindre el retenidor no lineal, es descriu una metodologia independent de la ferramenta d'aprenentatge utilitzada, però validada amb l'ús de rets neuronals artificials. Finalment es realitza un anàlisis de les propietats d'aquestos nous retenidors, comparant-los amb els seus predecessors basats amb funcions primitives, així com la seua implementació i validació amb un braç robot de 6 graus de llibertat i amb un robot mòbil de rodes.
Per el que respecta al problema de generació de trajectòries factibles per al robot i per la mesura en la imatge, aquesta tesis proposa la nova estratègia de control basada amb el filtrat de la referència i la seua generalització des de el punt de vista multi-freqüència.
- Estratègia de control basada amb el filtrat de la referència (Capítol 5): una nova estratègia de control es proposada per ampliar significativament l'espai de solucions dels sistemes robòtics realimentats amb sensors de visió artificial. La principal idea es la d'utilitzar les trajectòries optimes obtingudes per una trajectòria predita per un filtre de Kalman seguit d'un suavitzat basat en l'algoritme Rauch-Tung-Striebel (RTS) com noves referències per a un control donat. En aquest treball es proporciona tant la descripció del algoritme així com la seua implementació i validació utilitzant un braç robòtic industrial de 6 graus de llibertat.
- Estratègia de control bi-freqüència basada en el filtrat (Capítol 5): generalització de l'estratègia de control basada am filtrat de la referència des de un punt de vista multi freqüència, amb un filtre de Kalman multi freqüència i un Kalman-Smoother dual basat amb la relació existent entre les freqüències del sensor i del controlador, reduint així el cost computacional de l'algoritme i, al mateix temps, donant solució al problema de la latència del sensor. L'algoritme d'implementació d'aquesta tècnica, així com la seua validaciSolanes Galbis, JE. (2015). MULTI-RATE VISUAL FEEDBACK ROBOT CONTROL [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/57951TESI
Research on robot motion control and trajectory tracking based on agricultural seeding
With the development of science and technology, agricultural production has been gradually industrialized, and the use of robots instead of humans for seeding is one of the agricultural industrializations. This paper studied the seeding path planning and path tracking algorithms of the seeding robot, carried out experiments, and compared the improved proportion, integral, differential (PID) algorithm with the traditional PID control algorithm. The results demonstrated that both the improved and non-improved control algorithms played a good role in tracking on the straight path, but the improved control algorithm had a better tracking effect on the turning path; the displacement deviation and angle deviation of the tracking trajectory of the improved PID algorithm were reduced faster and more stable than the traditional PID algorithm; the tracking trajectory was shorter and the operation time of the robot was less under the improved PID algorithm than the traditional one
Recommended from our members
From Model-Based to Data-Driven Discrete-Time Iterative Learning Control
This dissertation presents a series of new results of iterative learning control (ILC) that progresses from model-based ILC algorithms to data-driven ILC algorithms. ILC is a type of trial-and-error algorithm to learn by repetitions in practice to follow a pre-defined finite-time maneuver with high tracking accuracy.
Mathematically ILC constructs a contraction mapping between the tracking errors of successive iterations, and aims to converge to a tracking accuracy approaching the reproducibility level of the hardware. It produces feedforward commands based on measurements from previous iterations to eliminates tracking errors from the bandwidth limitation of these feedback controllers, transient responses, model inaccuracies, unknown repeating disturbance, etc.
Generally, ILC uses an a priori model to form the contraction mapping that guarantees monotonic decay of the tracking error. However, un-modeled high frequency dynamics may destabilize the control system. The existing infinite impulse response filtering techniques to stop the learning at such frequencies, have initial condition issues that can cause an otherwise stable ILC law to become unstable. A circulant form of zero-phase filtering for finite-time trajectories is proposed here to avoid such issues. This work addresses the problem of possible lack of stability robustness when ILC uses an imperfect a prior model.
Besides the computation of feedforward commands, measurements from previous iterations can also be used to update the dynamic model. In other words, as the learning progresses, an iterative data-driven model development is made. This leads to adaptive ILC methods.
An indirect adaptive linear ILC method to speed up the desired maneuver is presented here. The updates of the system model are realized by embedding an observer in ILC to estimate the system Markov parameters. This method can be used to increase the productivity or to produce high tracking accuracy when the desired trajectory is too fast for feedback control to be effective.
When it comes to nonlinear ILC, data is used to update a progression of models along a homotopy, i.e., the ILC method presented in this thesis uses data to repeatedly create bilinear models in a homotopy approaching the desired trajectory. The improvement here makes use of Carleman bilinearized models to capture more nonlinear dynamics, with the potential for faster convergence when compared to existing methods based on linearized models.
The last work presented here finally uses model-free reinforcement learning (RL) to eliminate the need for an a priori model. It is analogous to direct adaptive control using data to directly produce the gains in the ILC law without use of a model. An off-policy RL method is first developed by extending a model-free model predictive control method and then applied in the trial domain for ILC. Adjustments of the ILC learning law and the RL recursion equation for state-value function updates allow the collection of enough data while improving the tracking accuracy without much safety concerns. This algorithm can be seen as the first step to bridge ILC and RL aiming to address nonlinear systems
- …