2,305 research outputs found
Full-Duplex Relaying in MIMO-OFDM Frequency-Selective Channels with Optimal Adaptive Filtering
In-band full-duplex transmission allows a relay station to theoretically
double its spectral efficiency by simultaneously receiving and transmitting in
the same frequency band, when compared to the traditional half-duplex or
out-of-band full-duplex counterpart. Consequently, the induced
self-interference suffered by the relay may reach considerable power levels,
which decreases the signal-to-interference-plus-noise ratio (SINR) in a
decode-and-forward (DF) relay, leading to a degradation of the relay
performance. This paper presents a technique to cope with the problem of
self-interference in broadband multiple-input multiple-output (MIMO) relays.
The proposed method uses a time-domain cancellation in a DF relay, where a
replica of the interfering signal is created with the help of a recursive least
squares (RLS) algorithm that estimates the interference frequency-selective
channel. Its convergence mean time is shown to be negligible by simulation
results, when compared to the length of a typical orthogonal-frequency division
multiplexing (OFDM) sequences. Moreover, the bit-error-rate (BER) and the SINR
in a OFDM transmission are evaluated, confirming that the proposed method
extends significantly the range of self-interference power to which the relay
is resilient to, when compared with other mitigation schemes
Applying Spatial Diversity to Mitigate Partial Band Interference in Undersea Networks
Many acoustic channels suffer from interference which is neither narrowband nor impulsive. This relatively long duration partial band interference can be particularly detrimental to system performance. We survey recent work in interference mitigation and orthogonal frequency division multiplexing (OFDM) as background motivation to develop a spatial diversity receiver for use in underwater networks. The network consists of multiple distributed cabled hydrophones that receive data transmitted over a time-varying multipath channel in the presence of partial band interference produced by interfering active sonar signals as well as marine mammal vocalizations. In operational networks, many “dropped” messages are lost due to partial band interference which corrupts different portions of the received signal depending on the relative position of the interferers, information source and receivers due to the slow speed of propagation
Orthogonal Direct Sequence Code Division Multiple Access For Broadcast Communications on Power Lines
Techniques for Wireless Channel Modeling in Harsh Environments
With the rapid growth in the networked environments for different industrial, scientific and defense applications, there is a vital need to assure the user or application a certain level of Quality of Service (QoS). Environments like the industrial environment are particularly harsh with interference from metal structures (as found in the manufacturing sector), interference generated during wireless propagation, and multipath fading of the radio frequency (RF) signal all invite novel mitigation techniques. The challenge of achieving the benefits like improved energy efficiency using wireless is closely coupled with maintaining network QoS requirements. Assessment and management of QoS needs to occur, allowing the network to adapt to changes in the RF, information, and operational environments. The capacity to adapt is paramount to maintaining the required operational performance (throughput, latency, reliability and security). This thesis address the need for accurate radio channel modeling techniques to improve the performance of the wireless communication systems. Multiple different channel modeling techniques are considered including statistical models, ray tracing techniques, finite time-difference technique, transmission line matrix method (TLM), and stochastic differential equation-based (SDE) dynamic channel models. Measurement of ambient RF is performed at several harsh industrial environments to demonstrate the existence of uncertainty in channel behavior. Comparison of various techniques is performed with metrics including accuracy, applicability, and computational efficiency. SDE- and TLM-based methods are validated using indoor and outdoor measurements. Fast, accurate techniques for modeling multipath fading in harsh environments is explored. Application of dynamic channel models is explored for improving QoS of wireless communication system. The TLM-based models provide accurate site-specific path loss calculations taking into consideration materials and propagation characteristics of propagating environment. The validation studies confirm the technique is comparable with existing channel models. The TLM-based channel models is extended to compute the site-specific multipath characteristics of the radio channel eliminating the need for experimental measurement. The TLM-based simulator is also integrated with packet-level network simulator to perform end to end-to-end site specific calculation of wireless network performance. The SDE-channel models provide accurate online estimations of the channel performance along with accurate one-step prediction of the signal strength. The validation studies confirm the accuracy of the technique. Application of the SDE-based models for adaptive antenna control is formulated using online recursive estimation
Applications of artificial intelligence in powerline communications in terms of noise detection and reduction : a review
Abstract: The technology which utilizes the power line as a medium for transferring information known as powerline communication (PLC) has been in existence for over a hundred years. It is beneficial because it avoids new installation since it uses the present installation for electrical power to transmit data. However, transmission of data signals through a power line channel usually experience some challenges which include impulsive noise, frequency selectivity, high channel attenuation, low line impedance etc. The impulsive noise exhibits a power spectral density within the range of 10-15 dB higher than the background noise, which could cause a severe problem in a communication system. For better outcome of the PLC system, these noises must be detected and suppressed. This paper reviews various techniques used in detecting and mitigating the impulsive noise in PLC and suggests the application of machine learning algorithms for the detection and removal of impulsive noise in power line communication systems
Dirty RF Signal Processing for Mitigation of Receiver Front-end Non-linearity
Moderne drahtlose Kommunikationssysteme stellen hohe und teilweise
gegensätzliche Anforderungen an die Hardware der Funkmodule, wie z.B.
niedriger Energieverbrauch, große Bandbreite und hohe Linearität. Die
Gewährleistung einer ausreichenden Linearität ist, neben anderen analogen
Parametern, eine Herausforderung im praktischen Design der Funkmodule. Der
Fokus der Dissertation liegt auf breitbandigen HF-Frontends für
Software-konfigurierbare Funkmodule, die seit einigen Jahren kommerziell
verfügbar sind. Die praktischen Herausforderungen und Grenzen solcher
flexiblen Funkmodule offenbaren sich vor allem im realen Experiment. Eines
der Hauptprobleme ist die Sicherstellung einer ausreichenden analogen
Performanz über einen weiten Frequenzbereich. Aus einer Vielzahl an
analogen Störeffekten behandelt die Arbeit die Analyse und Minderung von
Nichtlinearitäten in Empfängern mit direkt-umsetzender Architektur. Im
Vordergrund stehen dabei Signalverarbeitungsstrategien zur Minderung
nichtlinear verursachter Interferenz - ein Algorithmus, der besser unter
"Dirty RF"-Techniken bekannt ist. Ein digitales Verfahren nach der
Vorwärtskopplung wird durch intensive Simulationen, Messungen und
Implementierung in realer Hardware verifiziert. Um die Lücken zwischen
Theorie und praktischer Anwendbarkeit zu schließen und das Verfahren in
reale Funkmodule zu integrieren, werden verschiedene Untersuchungen
durchgeführt. Hierzu wird ein erweitertes Verhaltensmodell entwickelt, das
die Struktur direkt-umsetzender Empfänger am besten nachbildet und damit
alle Verzerrungen im HF- und Basisband erfasst. Darüber hinaus wird die
Leistungsfähigkeit des Algorithmus unter realen Funkkanal-Bedingungen
untersucht. Zusätzlich folgt die Vorstellung einer ressourceneffizienten
Echtzeit-Implementierung des Verfahrens auf einem FPGA. Abschließend
diskutiert die Arbeit verschiedene Anwendungsfelder, darunter spektrales
Sensing, robuster GSM-Empfang und GSM-basiertes Passivradar. Es wird
gezeigt, dass nichtlineare Verzerrungen erfolgreich in der digitalen
Domäne gemindert werden können, wodurch die Bitfehlerrate gestörter
modulierter Signale sinkt und der Anteil nichtlinear verursachter
Interferenz minimiert wird. Schließlich kann durch das Verfahren die
effektive Linearität des HF-Frontends stark erhöht werden. Damit wird der
zuverlässige Betrieb eines einfachen Funkmoduls unter dem Einfluss der
Empfängernichtlinearität möglich. Aufgrund des flexiblen Designs ist der
Algorithmus für breitbandige Empfänger universal einsetzbar und ist nicht
auf Software-konfigurierbare Funkmodule beschränkt.Today's wireless communication systems place high requirements on the
radio's hardware that are largely mutually exclusive, such as low power
consumption, wide bandwidth, and high linearity. Achieving a sufficient
linearity, among other analogue characteristics, is a challenging issue in
practical transceiver design. The focus of this thesis is on wideband
receiver RF front-ends for software defined radio technology, which became
commercially available in the recent years. Practical challenges and
limitations are being revealed in real-world experiments with these radios.
One of the main problems is to ensure a sufficient RF performance of the
front-end over a wide bandwidth. The thesis covers the analysis and
mitigation of receiver non-linearity of typical direct-conversion receiver
architectures, among other RF impairments. The main focus is on DSP-based
algorithms for mitigating non-linearly induced interference, an approach
also known as "Dirty RF" signal processing techniques. The conceived
digital feedforward mitigation algorithm is verified through extensive
simulations, RF measurements, and implementation in real hardware. Various
studies are carried out that bridge the gap between theory and practical
applicability of this approach, especially with the aim of integrating that
technique into real devices. To this end, an advanced baseband behavioural
model is developed that matches to direct-conversion receiver architectures
as close as possible, and thus considers all generated distortions at RF
and baseband. In addition, the algorithm's performance is verified under
challenging fading conditions. Moreover, the thesis presents a
resource-efficient real-time implementation of the proposed solution on an
FPGA. Finally, different use cases are covered in the thesis that includes
spectrum monitoring or sensing, GSM downlink reception, and GSM-based
passive radar. It is shown that non-linear distortions can be successfully
mitigated at system level in the digital domain, thereby decreasing the bit
error rate of distorted modulated signals and reducing the amount of
non-linearly induced interference. Finally, the effective linearity of the
front-end is increased substantially. Thus, the proper operation of a
low-cost radio under presence of receiver non-linearity is possible. Due to
the flexible design, the algorithm is generally applicable for wideband
receivers and is not restricted to software defined radios
3D printed architected hollow sphere foams with low-frequency phononic band gaps
We experimentally and numerically investigate elastic wave propagation in a class of lightweight architected materials composed of hollow spheres and binders. Elastic wave transmission tests demonstrate the existence of vibration mitigation capability in the proposed architected foams, which is validated against the numerically predicted phononic band gap. We further describe that the phononic band gap properties can be significantly altered through changing hollow sphere thickness and binder size in the architected foams. Importantly, our results indicate that by increasing the stiffness contrast between hollow spheres and binders, the phononic band gaps are broadened and shifted toward a low-frequency range. At the threshold stiffness contrast of 50, the proposed architected foam requires only a volume fraction of 10.8% while exhibiting an omnidirectional band gap size exceeding 130%. The proposed design paradigm and physical mechanisms are robust and applicable to architected foams with other topologies, thus providing new opportunities to design phononic metamaterials for low-frequency vibration control
- …