Impact of PWM strategies on RMS current of the DC-link Voltage Capacitor of a dual-three phase drive

The major drawback of usual dual three-phase AC machines, when supplied by a Voltage Source Inverter (VSI), is the occurrence of extra harmonic currents which circulate in the stator windings causing additional losses and constraints on the power component. This paper compares dedicated Pulse Width Modulation (PWM) strategies used for controlling a dual three phase Permanent Magnet Synchronous machine supplied by a six-leg VSI. Since the application is intended for low-voltage (48V) mild-hybrid automotive traction, an additional major constraint arises: the compactness of the drive related to the size of the DC-bus capacitor. Thus, the PWM strategy must be chosen by taking into consideration its impact on both, the motor and the RMS value of DC-bus current

An Improved Sideband Current Harmonic Model of Interior PMSM Drive by Considering Magnetic Saturation and Cross-Coupling Effects

The sideband current harmonics, as parasitic characteristics in permanent-magnet synchronous machine (PMSM) drives with space vector pulsewidth modulation technique, will increase the corresponding electromagnetic loss, torque ripple, vibration, and acoustic noises. Therefore, fast yet accurate evaluation of the resultant sideband current harmonic components is of particular importance during the design stage of the drive system. However, the inevitable magnetic saturation and cross-coupling effects in interior PMSM drives would have a significant impact on the current components, while the existing analytical sideband current harmonic model neglects those effects. This paper introduces a significant improvement on the analytical model by taking into account these effects with corresponding nonlinear factors. Experimental results are carried out to underpin the accuracy improvements of the predictions from the proposed model over the existing analytical one. The proposed model can offer a very detailed and insightful revelation of impacts of the magnetic saturation and cross-coupling effects on the corresponding sideband current harmonics

Investigation of slim type BLDC motor drive with torque ripple minimization using abridged space-vector PWM control method

Abstract: Brushless DC (BLDC) motors are becoming an increasingly popular motor of choice for its unique characteristics. The BLDC motor drive is assumed to have trapezoidal back-electromotive force (EMF), rectangular phase currents and together produces the desired torque. However, practical back-EMF waveform might not be exactly trapezoidal because of current ripple, design considerations and manufacturing limitations. The adverse effect is the torque ripple generated due to the current ripple that causes mechanical vibration, acoustic noise and affects the accuracy of speed and position control which is not desirable in motor operation. In this paper an algorithm is developed to control and minimize the generated torque ripple using Space Vector Pulse Width Modulation (SVPWM) scheme. The efficiency improvement of slim type BLDC motor is confirmed using MATLAB environment and low cost TI Piccolo F28035 microcontroller (MC)

Compensation of Torque Ripple in High Performance BLDC Motor Drives

Brushless DC motor drives (BLDC) are finding expanded use in high performance applications where torque smoothness is essential. The nature of the square-wave current excitation waveforms in BLDC motor drives permits some important system simplifications compared to sinusoidal permanent magnet AC (PMAC) machines. However, it is the simplicity of the BLDC motor drive that is responsible for causing an additional source of ripple torque commonly known as commutation torque to develop. In this paper, a compensation technique for reducing the commutation torque ripple is proposed. With the experimental results, the proposed method demonstrates the effectiveness for a control system using the BLDC motors that requires high speed and accuracy

Implementation and Analysis of Direct Torque Control for Permanent Magnet Synchronous Motor Using Gallium Nitride based Inverter

Permanent magnet synchronous machines (PMSMs) attract considerable attention in various industrial applications, such as electric and hybrid electric vehicles, due to their high efficiency and high-power density. In this thesis, the mathematical model of PMSM and two popular control strategies, field-oriented control (FOC) and direct torque control (DTC), are analyzed and compared. The results demonstrated that the DTC has better dynamic response in comparison to FOC. Moreover, DTC can eliminate the use of position sensor, which will save the cost of the PMSM drive system. Therefore, this thesis focuses on the design and implementation of high-performance DTC for PMSMs with a Gallium Nitride (GaN) based high switching frequency motor drive. First, the characteristics and operation principles of a PMSM are introduced. Then, the mathematical models of a PMSM under different coordinate systems are investigated. Consequently, a PMSM model is developed based on the dq rotating reference frame and implemented in the MATLAB/Simulink for validation. Two advanced PMSM control strategies, FOC and DTC, are investigated and compared in terms of control performance through comprehensive simulation studies and the results demonstrate that DTC has better dynamic performance. Conventional DTC contributes to higher torque ripple in the PMSM due to the limited switching frequency in a conventional semiconductor-based motor drive, which inevitably deteriorates the drive performance. Therefore, this thesis aims to reduce the torque ripple in the DTC based PMSM drive by using the new generation wide bandgap switching devices. More specifically, DTC is improved by using the optimized space vector pulse width modulation strategy and a higher switching frequency contributed by the GaN based motor drive. Finally, the proposed DTC-SVM based PMSM control strategy is implemented on the digital signal processor (DSP) and evaluated on the laboratory GaN based PMSM drive. Both the simulation and experimental results show that the proposed improvement in the DTC can further improve the PMSM drive performance

Commutation Time Estimator For PM BLDC Motor Torque Signature Enhancement

This paper presents the development of the commutation time estimator (CTE) for PM BLDC motor drives. The proposed scheme is aimed to enhance motor output torque by minimizing the generated torque ripples. The torque ripples originating from commutation instances cause spikes and dips in the motor output torque. The motor output torque could be enhanced by mitigating the phase current mismatch rate during phase current commutation period. This rate could be almost matched by introducing the commutation time estimator (CTE) in order to control the rate of the energized phase current to be matched with the de-energized phase rate. Results obtained have validated and verified the proposed CTE effectiveness with a 50% average reduction of the generated torque ripples in PM BLDC motor

Critical Aspects of Electric Motor Drive Controllers and Mitigation of Torque Ripple - Review

Electric vehicles (EVs) are playing a vital role in sustainable transportation. It is estimated that by 2030, Battery EVs will become mainstream for passenger car transportation. Even though EVs are gaining interest in sustainable transportation, the future of EV power transmission is facing vital concerns and open research challenges. Considering the case of torque ripple mitigation and improved reliability control techniques in motors, many motor drive control algorithms fail to provide efficient control. To efficiently address this issue, control techniques such as Field Orientation Control (FOC), Direct Torque Control (DTC), Model Predictive Control (MPC), Sliding Mode Control (SMC), and Intelligent Control (IC) techniques are used in the motor drive control algorithms. This literature survey exclusively compares the various advanced control techniques for conventionally used EV motors such as Permanent Magnet Synchronous Motor (PMSM), Brushless Direct Current Motor (BLDC), Switched Reluctance Motor (SRM), and Induction Motors (IM). Furthermore, this paper discusses the EV-motors history, types of EVmotors, EV-motor drives powertrain mathematical modelling, and design procedure of EV-motors. The hardware results have also been compared with different control techniques for BLDC and SRM hub motors. Future direction towards the design of EV by critical selection of motors and their control techniques to minimize the torque ripple and other research opportunities to enhance the performance of EVs are also presented.publishedVersio

Space Vector Based Hybrid Random PWM Algorithm for DTC-IM Drive To Achieve Superior Waveform Quality

This paper presents a simplified space vector based hybrid random pulsewidth modulation algorithm for direct torque controlled induction motor drive to achieve superior waveform quality and reduced acoustical noise and harmonic distortion. To reduce the complexity involved in the conventional space vector approach, the proposed pulsewidth modulation (PWM) algorithm uses instantaneous sampled reference phase voltages to calculate the actual switching times of the devices. The proposed PWM algorithm modifies the time duration of application of vector V0 (000) by using a factor. By changing the value of this factor many switching sequences can be derived. The proposed PWM algorithm uses 0127, 012 and 721 switching sequences when value takes 0.5, 1 and 0 respectively. In order to achieve superior waveform quality, the harmonic analysis of these sequences is carried out using the notion of stator flux ripple and expressions are derived for mean square flux ripple in terms of imaginary switching times and modulation index. By comparing the instantaneous ripple values in each sampling time interval, the suitable sequence is selected that results in minimum current ripple. Thus, the proposed algorithm gives reduced harmonic distortion when compared with the SVPWM algorithm. As the zero state time is varied randomly according to the operating sequence, randomization effect will occur, which results in reduced dominating harmonics and hence acoustical noise when compared with the SVPWM algorithm. The simulation results validate the proposed algorithm