Review of energy harvesting techniques and applications for microelectronics

The trends in technology allow the decrease in both size and power consumption of complex digital systems. This decrease in size and power gives rise to new paradigms of computing and use of electronics, with many small devices working collaboratively or at least with strong communication capabilities. Examples of these new paradigms are wearable devices and wireless sensor networks. Currently, these devices are powered by batteries. However, batteries present several disadvantages: the need to either replace or recharge them periodically and their big size and weight compared to high technology electronics. One possibility to overcome these power limitations is to extract (harvest) energy from the environment to either recharge a battery, or even to directly power the electronic device. This paper presents several methods to design an energy harvesting device depending on the type of energy available.Peer Reviewe

Power from the people - Human-powered small-scale generation system for a sustainable dance club

Most Human-Powered Energy-Harvesting Systems are used to power ubiquitously deployed sensor networks and mobile electronics. These systems scavenge power from human activity or derive limited energy from ambient heat, light, or vibrations. In this article, systems that use human power by walking or running are analyzed, where an alternative system has been designed and implemented that generates energy from people dancing in a club environment

System for energy harvesting and/or generation, storage, and delivery

A device and method for harvesting, generating, storing, and delivering energy to a load, particularly for remote or inaccessible applications. The device preferably comprises one or more energy sources, at least one supercapacitor, at least one rechargeable battery, and a controller. The charging of the energy storage devices and the delivery of power to the load is preferably dynamically varied to maximize efficiency. A low power consumption charge pump circuit is preferably employed to collect power from low power energy sources while also enabling the delivery of higher voltage power to the load. The charging voltage is preferably programmable, enabling one device to be used for a wide range of specific applications

Fast-waking and low-voltage thermoelectric and photovoltaic CMOS chargers for energy-harvesting wireless microsensors

The small size of wireless microsystems allows them to be deployed within larger systems to sense and monitor various indicators throughout many applications. However, their small size restricts the amount of energy that can be stored in the system. Current microscale battery technologies do not store enough energy to power the microsystems for more than a few months without recharging. Harvesting ambient energy to replenish the on-board battery extend the lifetime of the microsystem. Although light and thermal energy are more practical in some applications than other forms of ambient energy, they nevertheless suffer from long energy droughts. Additionally, due to the very limited space available in the microsystem, the system cannot store enough energy to continue operation throughout these energy droughts. Therefore, the microsystem must reliably wake from these energy droughts, even if the on-board battery has been depleted. The challenge here is waking a microsystem directly from an ambient source transducer whose voltage and power levels are limited due to their small size. Starter circuits must be used to ensure the system wakes regardless of the state of charge of the energy storage device. The purpose of the presented research is to develop, design, simulate, fabricate, test and evaluate CMOS integrated circuits that can reliably wake from no energy conditions and quickly recharge a depleted battery. Since the battery is depleted during startup, the system must use the low voltage produced by the energy harvesting transducer to transfer energy. The presented system has the fastest normalized wake time while reusing the inductor already present in the battery charger for startup, therefore, minimizing the overall footprint of the system.Ph.D

Analysis, Design and implementation of Energy Harvesting Systems for Wireless Sensor Nodes.

Ph.DDOCTOR OF PHILOSOPH

Inductively Coupled CMOS Power Receiver For Embedded Microsensors

Inductively coupled power transfer can extend the lifetime of embedded microsensors that save costs, energy, and lives. To expand the microsensors' functionality, the transferred power needs to be maximized. Plus, the power receiver needs to handle wide coupling variations in real applications. Therefore, the objective of this research is to design a power receiver that outputs the highest power for the widest coupling range. This research proposes a switched resonant half-bridge power stage that adjusts both energy transfer frequency and duration so the output power is maximally high. A maximum power point (MPP) theory is also developed to predict the optimal settings of the power stage with 98.6% accuracy. Finally, this research addresses the system integration challenges such as synchronization and over-voltage protection. The fabricated self-synchronized prototype outputs up to 89% of the available power across 0.067%~7.9% coupling range. The output power (in percentage of available power) and coupling range are 1.3× and 13× higher than the comparable state of the arts.Ph.D

Surface micromachined MEMS variable capacitor with two-cavity for energy harvesting

In this research, a novel MEMS variable capacitor with two capacitive cavities for energy harvesting was developed that use the wasted energy associated with undesirable mechanical vibrations to power microelectronic sensors and actuators widely found in structures and systems surrounding us. The harvested power, though very small, can have a profound effect on the usage of microsensors. First, the self-powered sensors will no longer require regular battery maintenance. Second, the self-powered chip is a liberating technology. On a circuit board, it can simplify the connection. On a commercial jet, the sensors can greatly simplify cabling. The design, fabrication, modeling and complete set of characterization of MEMS variable capacitors with two-cavity are presented in details in this thesis. The MEMS variable capacitors are unique in its two-cavity design and use of electroplated nickel as the main structural material. The device consists of 2x2 mm² movable capacitive proof mass plates with a thickness of 30 [mu]m suspended between two fixed electrodes forming two vertical capacitors. When the capacitance increases for one cavity, it decreases for the other. This allows using both up and down directions to generate energy. The suspended movable plates are supported by four serpentine springs with a thickness of 3-5 [mu]m that are attached to the address lines on a silicon substrate only at the anchors' points which is made of electroplated nickel. The serpentine suspension beams are made with a width, thickness and total length (four serpentine turns) of 15 [mu]m, 5 [mu]m and 1485 [mu]m. Five gold stoppers with height of 2-4 [mu]m were electroplated on the fixed plates to prevent snap-down of the movable plates by overwhelming electrostatic force. SiO2 and Si3N4 thin layers were patterned on the fixed plates to insulate the stoppers and enhance the dielectric property of capacitive cavities. The MEMS variable capacitor with two-cavity has been designed and modeled using MEMS CAD tool and COMSOL Multi-PhysIncludes bibliographical references (pages 108-118)

The Application of a Triboelectric Energy Harvester in the Packaged Product Vibration Environment

Smart packaging technology is growing every year, complemented by the development of micro-electronic devices. These two trends in innovation create unique capabilities for monitoring and tracking packaged products in transit. Developing in tandem with this momentum of invention and micro-scaling of technology is the need for innovative ways to power these devices. This paper details a novel system that harvests energy from the vibration inherent in the transportation of packaged products, stores it, and uses it to power sensors that measure the very same environment from which the energy is harvested. Also accomplished in this research is the exploration of the physical and electrical durability of the energy harvester, as well as its sensitivity to environmental relative humidity. A triboelectric energy harvester converts mechanical energy to electrical energy, which is then collected and used to charge a rechargeable energy cell. This energy cell may then be used to power small electronic devices for a myriad of applications, such as temperature and humidity sensors, accelerometers, or GPS tracking devices. This energy harvester is constructed in the form of a tier sheet to be used within a unit load, replacing a corrugate sheet with a device that achieves the same purpose, while enabling power generation. This research details a unique use of the triboelectric energy harvesting method in its application in packaged product distribution, as well as conditions, such as physical durability of the harvester and humidity of its immediate environment. The triboelectric energy harvester developed is experimentally validated for use in generating power sufficient to charge a coin cell battery capable of powering various field data recorders, the requirements of which are detailed in this manuscript