Review of radar classification and RCS characterisation techniques for small UAVs or drones

This review explores radar-based techniques currently utilised in the literature to monitor small unmanned aerial vehicle (UAV) or drones; several challenges have arisen due to their rapid emergence and commercialisation within the mass market. The potential security threats posed by these systems are collectively presented and the legal issues surrounding their successful integration are briefly outlined. Key difficulties involved in the identification and hence tracking of these `radar elusive' systems are discussed, along with how research efforts relating to drone detection, classification and radar cross section (RCS) characterisation are being directed in order to address this emerging challenge. Such methods are thoroughly analysed and critiqued; finally, an overall picture of the field in its current state is painted, alongside scope for future work over a broad spectrum

Avionics-based GNSS integrity augmentation for unmanned aerial systems sense-and-avoid

This paper investigates the synergies between a GNSS Avionics Based Integrity Augmentation (ABIA) system and a novel Unmanned Aerial System (UAS) Sense-and-Avoid (SAA) architecture for cooperative and non-cooperative scenarios. The integration of ABIA with SAA has the potential to provide an integrity-augmented SAA solution that will allow the safe and unrestricted access of UAS to commercial airspace. The candidate SAA system uses Forward-Looking Sensors (FLS) for the non-cooperative case and Automatic Dependent Surveillance-Broadcast (ADS-B) for the cooperative case. In the non-cooperative scenario, the system employs navigation-based image stabilization with image morphology operations and a multi-branch Viterbi filter for obstacle detection, which allows heading estimation. The system utilizes a Track-to-Track (T3) algorithm for data fusion that allows combining data from different tracks obtained with FLS and/or ADS-B depending on the scenario. Successively, it utilizes an Interacting Multiple Model (IMM) algorithm to estimate the state vector allowing a prediction of the intruder trajectory over a specified time horizon. Both in the cooperative and non-cooperative cases, the risk of collision is evaluated by setting a threshold on the Probability Density Function (PDF) of a Near Mid-Air Collision (NMAC) event over the separation area. So, if the specified threshold is exceeded, an avoidance manoeuver is performed based on a heading-based Differential Geometry (DG) algorithm and optimized utilizing a cost function with minimum time constraints and fuel penalty criteria weighted as a function of separation distance. Additionally, the optimised avoidance trajectory considers the constraints imposed by the ABIA in terms of GNSS constellation satellite elevation angles, preventing degradation or losses of navigation data during the whole SAA loop. This integration scheme allows real-time trajectory corrections to re-establish the Required Navigation Performance (RNP) when actual GNSS accuracy degradations and/or data losses take place (e.g., due to aircraft-satellite relative geometry, GNSS receiver tracking, interference, jamming or other external factors). Various simulation case studies were accomplished to evaluate the performance of this Integrity-Augmented SAA (IAS) architecture. The selected host platform was the AEROSONDE Unmanned Aerial Vehicle (UAV) and the simulation cases addressed a variety of cooperative and non-cooperative scenarios in a representative cross-section of the AEROSONDE operational flight envelope. The simulation results show that the proposed IAS architecture is an excellent candidate to perform high-integrity Collision Detection and Resolution (CD&R) utilizing GNSS as the primary source of navigation data, providing solid foundation for future research and developments in this domain

Avionics-based GNSS integrity augmentation for unmanned aerial systems sense-and-avoid

This paper investigates the synergies between a GNSS Avionics Based Integrity Augmentation (ABIA) system and a novel Unmanned Aerial System (UAS) Sense-and-Avoid (SAA) architecture for cooperative and non-cooperative scenarios. The integration of ABIA with SAA has the potential to provide an integrity-augmented SAA solution that will allow the safe and unrestricted access of UAS to commercial airspace. The candidate SAA system uses Forward-Looking Sensors (FLS) for the non-cooperative case and Automatic Dependent Surveillance-Broadcast (ADS-B) for the cooperative case. In the non-cooperative scenario, the system employs navigation-based image stabilization with image morphology operations and a multi-branch Viterbi filter for obstacle detection, which allows heading estimation. The system utilizes a Track-to-Track (T3) algorithm for data fusion that allows combining data from different tracks obtained with FLS and/or ADS-B depending on the scenario. Successively, it utilizes an Interacting Multiple Model (IMM) algorithm to estimate the state vector allowing a prediction of the intruder trajectory over a specified time horizon. Both in the cooperative and non-cooperative cases, the risk of collision is evaluated by setting a threshold on the Probability Density Function (PDF) of a Near Mid-Air Collision (NMAC) event over the separation area. So, if the specified threshold is exceeded, an avoidance manoeuver is performed based on a heading-based Differential Geometry (DG) algorithm and optimized utilizing a cost function with minimum time constraints and fuel penalty criteria weighted as a function of separation distance. Additionally, the optimised avoidance trajectory considers the constraints imposed by the ABIA in terms of GNSS constellation satellite elevation angles, preventing degradation or losses of navigation data during the whole SAA loop. This integration scheme allows real-time trajectory corrections to re-establish the Required Navigation Performance (RNP) when actual GNSS accuracy degradations and/or data losses take place (e.g., due to aircraft-satellite relative geometry, GNSS receiver tracking, interference, jamming or other external factors). Various simulation case studies were accomplished to evaluate the performance of this Integrity-Augmented SAA (IAS) architecture. The selected host platform was the AEROSONDE Unmanned Aerial Vehicle (UAV) and the simulation cases addressed a variety of cooperative and non-cooperative scenarios in a representative cross-section of the AEROSONDE operational flight envelope. The simulation results show that the proposed IAS architecture is an excellent candidate to perform high-integrity Collision Detection and Resolution (CD&R) utilizing GNSS as the primary source of navigation data, providing solid foundation for future research and developments in this domain

Homography-Based State Estimation for Autonomous Exploration in Unknown Environments

This thesis presents the development of vision-based state estimation algorithms to enable a quadcopter UAV to navigate and explore a previously unknown GPS denied environment. These state estimation algorithms are based on tracked Speeded-Up Robust Features (SURF) points and the homography relationship that relates the camera motion to the locations of tracked planar feature points in the image plane. An extended Kalman filter implementation is developed to perform sensor fusion using measurements from an onboard inertial measurement unit (accelerometers and rate gyros) with vision-based measurements derived from the homography relationship. Therefore, the measurement update in the filter requires the processing of images from a monocular camera to detect and track planar feature points followed by the computation of homography parameters. The state estimation algorithms are designed to be independent of GPS since GPS can be unreliable or unavailable in many operational environments of interest such as urban environments. The state estimation algorithms are implemented using simulated data from a quadcopter UAV and then tested using post processed video and IMU data from flights of an autonomous quadcopter. The homography-based state estimation algorithm was effective, but accumulates drift errors over time due to the relativistic homography measurement of position

The University Defence Research Collaboration In Signal Processing

This chapter describes the development of algorithms for automatic detection of anomalies from multi-dimensional, undersampled and incomplete datasets. The challenge in this work is to identify and classify behaviours as normal or abnormal, safe or threatening, from an irregular and often heterogeneous sensor network. Many defence and civilian applications can be modelled as complex networks of interconnected nodes with unknown or uncertain spatio-temporal relations. The behavior of such heterogeneous networks can exhibit dynamic properties, reflecting evolution in both network structure (new nodes appearing and existing nodes disappearing), as well as inter-node relations. The UDRC work has addressed not only the detection of anomalies, but also the identification of their nature and their statistical characteristics. Normal patterns and changes in behavior have been incorporated to provide an acceptable balance between true positive rate, false positive rate, performance and computational cost. Data quality measures have been used to ensure the models of normality are not corrupted by unreliable and ambiguous data. The context for the activity of each node in complex networks offers an even more efficient anomaly detection mechanism. This has allowed the development of efficient approaches which not only detect anomalies but which also go on to classify their behaviour