Binary Classification of an Unknown Object through Atmospheric Turbulence Using a Polarimetric Blind-Deconvolution Algorithm Augmented with Adaptive Degree of Linear Polarization Priors

This research develops an enhanced material-classification algorithm to discriminate between metals and dielectrics using passive polarimetric imagery degraded by atmospheric turbulence. To improve the performance of the existing technique for near-normal collection geometries, the proposed algorithm adaptively updates the degree of linear polarization (DoLP) priors as more information becomes available about the scene. Three adaptive approaches are presented. The higher-order super-Gaussian method fits the distribution of DoLP estimates with a sum of two super-Gaussian functions to update the priors. The Gaussian method computes the classification threshold value, from which the priors are updated, by fitting the distribution of DoLP estimates with a sum of two Gaussian functions. Lastly, the distribution-averaging method approximates the threshold value by finding the mean of the DoLP distribution. The experimental results confirm that the new adaptive method significantly extends the collection geometry range of validity for the existing technique

Rapid mapping of digital integrated circuit logic gates via multi-spectral backside imaging

Modern semiconductor integrated circuits are increasingly fabricated at untrusted third party foundries. There now exist myriad security threats of malicious tampering at the hardware level and hence a clear and pressing need for new tools that enable rapid, robust and low-cost validation of circuit layouts. Optical backside imaging offers an attractive platform, but its limited resolution and throughput cannot cope with the nanoscale sizes of modern circuitry and the need to image over a large area. We propose and demonstrate a multi-spectral imaging approach to overcome these obstacles by identifying key circuit elements on the basis of their spectral response. This obviates the need to directly image the nanoscale components that define them, thereby relaxing resolution and spatial sampling requirements by 1 and 2 - 4 orders of magnitude respectively. Our results directly address critical security needs in the integrated circuit supply chain and highlight the potential of spectroscopic techniques to address fundamental resolution obstacles caused by the need to image ever shrinking feature sizes in semiconductor integrated circuits

Tactile sensing chips with POSFET array and integrated interface electronics

This work presents the advanced version of novel POSFET (Piezoelectric Oxide Semiconductor Field Effect Transistor) devices based tactile sensing chip. The new version of the tactile sensing chip presented here comprises of a 4 x 4 array of POSFET touch sensing devices and integrated interface electronics (i.e. multiplexers, high compliance current sinks and voltage output buffers). The chip also includes four temperature diodes for the measurement of contact temperature. Various components on the chip have been characterized systematically and the overall operation of the tactile sensing system has been evaluated. With new design the POSFET devices have improved performance (i.e. linear response in the dynamic contact forces range of 0.01–3N and sensitivity (without amplification) of 102.4 mV/N), which is more than twice the performance of their previous implementations. The integrated interface electronics result in reduced interconnections which otherwise would be needed to connect the POSFET array with off-chip interface electronic circuitry. This research paves the way for CMOS (Complementary Metal Oxide Semiconductor) implementation of full on-chip tactile sensing systems based on POSFETs

Radar systems for a polar mission, volume 3, appendices A-D, S, T

Success is reported in the radar monitoring of such features of sea ice as concentration, floe size, leads and other water openings, drift, topographic features such as pressure ridges and hummocks, fractures, and a qualitative indication of age and thickness. Scatterometer measurements made north of Alaska show a good correlation with a scattering coefficient with apparent thickness as deduced from ice type analysis of stereo aerial photography. Indications are that frequencies from 9 GHz upward seem to be better for sea ice radar purposes than the information gathered at 0.4 GHz by a scatterometer. Some information indicates that 1 GHz is useful, but not as useful as higher frequencies. Either form of like-polarization can be used and it appears that cross-polarization may be more useful for thickness measurement. Resolution requirements have not been fully established, but most of the systems in use have had poorer resolution than 20 meters. The radar return from sea ice is found to be much different than that from lake ice. Methods to decrease side lobe levels of the Fresnel zone-plate processor and to decrease the memory requirements of a synthetic radar processor are discussed

Group Theory of Circular-Polarization Effects in Chiral Photonic Crystals with Four-Fold Rotation Axes, Applied to the Eight-Fold Intergrowth of Gyroid Nets

We use group or representation theory and scattering matrix calculations to derive analytical results for the band structure topology and the scattering parameters, applicable to any chiral photonic crystal with body-centered cubic symmetry I432 for circularly-polarised incident light. We demonstrate in particular that all bands along the cubic [100] direction can be identified with the irreducible representations E+/-,A and B of the C4 point group. E+ and E- modes represent the only transmission channels for plane waves with wave vector along the ? line, and can be identified as non-interacting transmission channels for right- (E-) and left-circularly polarised light (E+), respectively. Scattering matrix calculations provide explicit relationships for the transmission and reflectance amplitudes through a finite slab which guarantee equal transmission rates for both polarisations and vanishing ellipticity below a critical frequency, yet allowing for finite rotation of the polarisation plane. All results are verified numerically for the so-called 8-srs geometry, consisting of eight interwoven equal-handed dielectric Gyroid networks embedded in air. The combination of vanishing losses, vanishing ellipticity, near-perfect transmission and optical activity comparable to that of metallic meta-materials makes this geometry an attractive design for nanofabricated photonic materials

Material Characterization Using Passive Multispectral Polarimetric Imagery

A new method for characterization of unknown targets using passive multispectral polarimetric imagery is presented. Previous work makes use of a pBRDF derived equation for the degree of linear polarization and with the aid of measurements at multiple incident angles estimates refractive index and reflection angle. This work uses known incident and reflection angles along with dispersion equations and polarimetric data at multiple wavelengths to recover the index of refraction. Although imagery is collected with a division of time polarimeter and a spectral filter wheel in iterative, manual steps, the new algorithm could be applied to any set of registered multispectral polarimetric images most notably those produced by a recently introduced division of focal plane multispectral polarimetric sensor. Experimental results are presented showing the novel algorithm\u27s ability to classify and characterize a range of materials

Multidimensional Optical Sensing and Imaging Systems (MOSIS): From Macro to Micro Scales

Multidimensional optical imaging systems for information processing and visualization technologies have numerous applications in fields such as manufacturing, medical sciences, entertainment, robotics, surveillance, and defense. Among different three-dimensional (3-D) imaging methods, integral imaging is a promising multiperspective sensing and display technique. Compared with other 3-D imaging techniques, integral imaging can capture a scene using an incoherent light source and generate real 3-D images for observation without any special viewing devices. This review paper describes passive multidimensional imaging systems combined with different integral imaging configurations. One example is the integral-imaging-based multidimensional optical sensing and imaging systems (MOSIS), which can be used for 3-D visualization, seeing through obscurations, material inspection, and object recognition from microscales to long range imaging. This system utilizes many degrees of freedom such as time and space multiplexing, depth information, polarimetric, temporal, photon flux and multispectral information based on integral imaging to record and reconstruct the multidimensionally integrated scene. Image fusion may be used to integrate the multidimensional images obtained by polarimetric sensors, multispectral cameras, and various multiplexing techniques. The multidimensional images contain substantially more information compared with two-dimensional (2-D) images or conventional 3-D images. In addition, we present recent progress and applications of 3-D integral imaging including human gesture recognition in the time domain, depth estimation, mid-wave-infrared photon counting, 3-D polarimetric imaging for object shape and material identification, dynamic integral imaging implemented with liquid-crystal devices, and 3-D endoscopy for healthcare applications.B. Javidi wishes to acknowledge support by the National Science Foundation (NSF) under Grant NSF/IIS-1422179, and DARPA and US Army under contract number W911NF-13-1-0485. The work of P. Latorre Carmona, A. Martínez-Uso, J. M. Sotoca and F. Pla was supported by the Spanish Ministry of Economy under the project ESP2013-48458-C4-3-P, and by MICINN under the project MTM2013-48371-C2-2-PDGI, by Generalitat Valenciana under the project PROMETEO-II/2014/062, and by Universitat Jaume I through project P11B2014-09. The work of M. Martínez-Corral and G. Saavedra was supported by the Spanish Ministry of Economy and Competitiveness under the grant DPI2015-66458-C2-1R, and by the Generalitat Valenciana, Spain under the project PROMETEOII/2014/072

Engineering aperiodic spiral order for photonic-plasmonic device applications

Thesis (Ph.D.)--Boston UniversityDeterministic arrays of metal (i.e., Au) nanoparticles and dielectric nanopillars (i.e., Si and SiN) arranged in aperiodic spiral geometries (Vogel's spirals) are proposed as a novel platform for engineering enhanced photonic-plasmonic coupling and increased light-matter interaction over broad frequency and angular spectra for planar optical devices. Vogel's spirals lack both translational and orientational symmetry in real space, while displaying continuous circular symmetry (i.e., rotational symmetry of infinite order) in reciprocal Fourier space. The novel regime of "circular multiple light scattering" in finite-size deterministic structures will be investigated. The distinctive geometrical structure of Vogel spirals will be studied by a multifractal analysis, Fourier-Bessel decomposition, and Delaunay tessellation methods, leading to spiral structure optimization for novel localized optical states with broadband fluctuations in their photonic mode density. Experimentally, a number of designed passive and active spiral structures will be fabricated and characterized using dark-field optical spectroscopy, ellipsometry, and Fourier space imaging. Polarization-insensitive planar omnidirectional diffraction will be demonstrated and engineered over a large and controllable range of frequencies. Device applications to enhanced LEDs, novel lasers, and thin-film solar cells with enhanced absorption will be specifically targeted. Additionally, using Vogel spirals we investigate the direct (i.e. free space) generation of optical vortices, with well-defined and controllable values of orbital angular momentum, paving the way to the engineering and control of novel types of phase discontinuities (i.e., phase dislocation loops) in compact, chip-scale optical devices. Finally, we report on the design, modeling, and experimental demonstration of array-enhanced nanoantennas for polarization-controlled multispectral nanofocusing, nanoantennas for resonant near-field optical concentration of radiation to individual nanowires, and aperiodic double resonance surface enhanced Raman scattering substrates